scispace - formally typeset
Journal ArticleDOI

Utilization of sewage sludge in EU application of old and new methods—A review

Reads0
Chats0
TLDR
In this article, the authors review past and future trends in sludge handling, focusing mainly at thermal processes (e.g. pyrolysis, wet oxidation, gasification) and the utilization of sewage sludge in cement manufacture as a co-fuel.
Abstract
The European Union has made progress in dealing with municipal wastewater in individual countries and as a corporate entity. However, it intends to make still further and substantial progress over the next 15 years. Currently, the most widely available options in the EU are the agriculture utilization, the waste disposal sites, the land reclamation and restoration, the incineration and other novel uses. The selection of an option on a local basis reflects local or national, cultural, historical, geographical, legal, political and economic circumstances. The degree of flexibility varies from country to country. In any case sludge treatment and disposal should always be considered as an integral part of treatment of wastewater. There is a wide range of other uses for sludge, which exploit its energy or chemical content, namely the thermal processes. The present paper sought to review past and future trends in sludge handling, focusing mainly at thermal processes (e.g. pyrolysis, wet oxidation, gasification) and the utilization of sewage sludge in cement manufacture as a co-fuel.

read more

Citations
More filters
Journal ArticleDOI

Utilization of energy from thermal treatment of sludge

TL;DR: In this paper, the authors compare well-known technologies of sludge utilization on the basis of energy and economical balances of real processes, based on pilot tests in the Central Waste Water Treatment Plant (CWWTP) in Prague, the biggest waste water treatment plant in the Czech Republic.
Journal ArticleDOI

The Influence of Sewage Sludge Content and Sintering Temperature on Selected Properties of Lightweight Expanded Clay Aggregate.

TL;DR: In this article, the effects of SS content and sintering temperature on LECA physical properties were evaluated with the use of a density analyzer and a helium pycnometer.
Journal ArticleDOI

Bio-Crude Production through Recycling of Pretreated Aqueous Phase via Activated Carbon

TL;DR: In this paper, the aqueous phase was treated with activated carbon, and its subsequent recycling effect on the properties of the bio-crude and the annealing phase was investigated.
Journal ArticleDOI

Supercritical carbon dioxide drying of municipal sewage sludge - Novel waste-to-energy valorization pathway.

TL;DR: In this article, the Supercritical CO 2 extraction process was investigated for the purpose of drying municipal sewage sludge and the results showed that after sCO2 processing the higher heating value (HHV) of sludge at wet basis moisture content of 52% was 14 MJ/kg and thus higher than the HHV of brown coal with similar moisture level (12MJ/kg).
References
More filters
Journal ArticleDOI

Sequential extraction procedure for the speciation of particulate trace metals

TL;DR: In this paper, an analytical procedure involving sequential chemicai extractions was developed for the partitioning of particulate trace metals (Cd, Co, Cu, Ni, Pb, Zn, Fe, and Mn) into five fractions: exchangeable, bound to carbonates, binding to Fe-Mn oxides and bound to organic matter.
Book

Wastewater Engineering Treatment Disposal Reuse

TL;DR: Wastewater Engineering: An Overview of Wastewater Engineering, Methods and Implementation Considerations as mentioned in this paper is a good starting point for a discussion of the issues of wastewater engineering. But, it is not a complete survey of the entire literature.
Journal ArticleDOI

Sewage sludge combustion

TL;DR: In this article, a review of the current and future issues related to the combustion of sewage sludge is presented, and a number of technologies for thermal processing of sludge are discussed in three groups, i.e., mono-combustion, cocombustions and alternative processes.
Journal ArticleDOI

Trace metal analysis on polluted sediments

TL;DR: In this article, the authors proposed a standardization with respect to grain size effects, commonly achieved by analyzing the sieve fraction <63μm, which is used to pin point major sources of metal pollution and to estimate the toxicity potential of dredged materials.
Related Papers (5)