Viscoelasticity in carbon nanotube composites.
TL;DR: Direct shear testing of epoxy thin films containing dense packing of multiwalled carbon nanotube fillers and report strong viscoelastic behaviour with up to 1,400% increase in loss factor (damping ratio) of the baseline epoxy, concluding that damping is related to frictional energy dissipation during interfacial sliding at the large, spatially distributed, nanotubes–nanotube interfaces.
Abstract: Polymer composites reinforced by carbon nanotubes have been extensively researched for their strength and stiffness properties. Unless the interface is carefully engineered, poor load transfer between nanotubes (in bundles) and between nanotubes and surrounding polymer chains may result in interfacial slippage and reduced performance. Interfacial shear, although detrimental to high stiffness and strength, could result in very high mechanical damping, which is an important attribute in many commercial applications. We previously reported evidence of damping in nanocomposites by measuring the modal response (at resonance) of cantilevered beams with embedded nanocomposite films. Here we carry out direct shear testing of epoxy thin films containing dense packing of multiwalled carbon nanotube fillers and report strong viscoelastic behaviour with up to 1,400% increase in loss factor (damping ratio) of the baseline epoxy. The great improvement in damping was achieved without sacrificing the mechanical strength and stiffness of the polymer, and with minimal weight penalty. Based on the interfacial shear stress (approximately 0.5 MPa) at which the loss modulus increases sharply for our system, we conclude that the damping is related to frictional energy dissipation during interfacial sliding at the large, spatially distributed, nanotube-nanotube interfaces.
Citations
More filters
TL;DR: Although not yet providing compelling mechanical strength or electrical or thermal conductivities for many applications, CNT yarns and sheets already have promising performance for applications including supercapacitors, actuators, and lightweight electromagnetic shields.
Abstract: Worldwide commercial interest in carbon nanotubes (CNTs) is reflected in a production capacity that presently exceeds several thousand tons per year. Currently, bulk CNT powders are incorporated in diverse commercial products ranging from rechargeable batteries, automotive parts, and sporting goods to boat hulls and water filters. Advances in CNT synthesis, purification, and chemical modification are enabling integration of CNTs in thin-film electronics and large-area coatings. Although not yet providing compelling mechanical strength or electrical or thermal conductivities for many applications, CNT yarns and sheets already have promising performance for applications including supercapacitors, actuators, and lightweight electromagnetic shields.
4,596 citations
TL;DR: Department of Materials Science, University of Patras, Greece, Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, and Dipartimento di Scienze Farmaceutiche, Universita di Trieste, Piazzale Europa 1, 34127 Triesteadays.
Abstract: Department of Materials Science, University of Patras, 26504 Rio Patras, Greece, Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, 48 Vass. Constantinou Avenue, 116 35 Athens, Greece, Institut de Biologie Moleculaire et Cellulaire, UPR9021 CNRS, Immunologie et Chimie Therapeutiques, 67084 Strasbourg, France, and Dipartimento di Scienze Farmaceutiche, Universita di Trieste, Piazzale Europa 1, 34127 Trieste, Italy
3,886 citations
TL;DR: In this paper, a review of the current understanding of carbon nanotubes and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT-based functionalization on the properties of polymers.
Abstract: Carbon nanotubes (CNTs) hold the promise of delivering exceptional mechanical properties and multi-functional characteristics. Ever-increasing interest in applying CNTs in many different fields has led to continued efforts to develop dispersion and functionalization techniques. To employ CNTs as effective reinforcement in polymer nanocomposites, proper dispersion and appropriate interfacial adhesion between the CNTs and polymer matrix have to be guaranteed. This paper reviews the current understanding of CNTs and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT dispersion and functionalization on the properties of CNT/polymer nanocomposites. The fabrication techniques and potential applications of CNT/polymer nanocomposites are also highlighted.
2,849 citations
TL;DR: In this paper, a review of the recent advances in nanotubes and nanotube-based composite sensors and actuators, with a particular emphasis on their electromechanical behavior is presented.
901 citations
TL;DR: It is reported that freestanding films of vertically aligned carbon nanotubes exhibit super-compressible foamlike behavior, and the lightweight, highly resilient nanotube films may be useful as compliant and energy-absorbing coatings.
Abstract: We report that freestanding films of vertically aligned carbon nanotubes exhibit super-compressible foamlike behavior. Under compression, the nanotubes collectively form zigzag buckles that can fully unfold to their original length upon load release. Compared with conventional low-density flexible foams, the nanotube films show much higher compressive strength, recovery rate, and sag factor, and the open-cell nature of the nanotube arrays gives excellent breathability. The nanotube films present a class of open-cell foam structures, consisting of well-arranged one-dimensional units (nanotube struts). The lightweight, highly resilient nanotube films may be useful as compliant and energy-absorbing coatings.
732 citations
References
More filters
TL;DR: A review of recent advances in carbon nanotubes and their composites can be found in this article, where the authors examine the research work reported in the literature on the structure and processing of carbon Nanotubes.
4,709 citations
TL;DR: In this paper, the mechanical behavior of multi-walled carbon nanotube/epoxy composites was studied in both tension and compression, and it was found that the compression modulus is higher than the tensile modulus, indicating that load transfer to the nanotubes in the composite is much higher in compression.
Abstract: The mechanical behavior of multiwalled carbon nanotube/epoxy composites was studied in both tension and compression. It was found that the compression modulus is higher than the tensile modulus, indicating that load transfer to the nanotubes in the composite is much higher in compression. In addition, it was found that the Raman peak position, indicating the strain in the carbon bonds under loading, shifts significantly under compression but not in tension. It is proposed that during load transfer to multiwalled nanotubes, only the outer layers are stressed in tension whereas all the layers respond in compression.
1,617 citations
"Viscoelasticity in carbon nanotube ..." refers background in this paper
...There are two possible mechanisms that could be responsible for the observed increase in mechanical damping: (1) energy dissipation caused by interfacial sliding at the nanotube–polymer interface and (2) energy dissipation caused by interfacial stick–slip sliding at the nanotube–nanotube interface....
[...]
1,435 citations
TL;DR: The controlled and reversible telescopic extension of multiwall carbon nanotubes is demonstrated, thus realizing ultralow-friction nanoscale linear bearings and constant-force nanosprings and near perfect, wear-free surfaces.
Abstract: We demonstrate the controlled and reversible telescopic extension of multiwall carbon nanotubes, thus realizing ultralow-friction nanoscale linear bearings and constant-force nanosprings. Measurements performed in situ on individual custom-engineered nanotubes inside a high-resolution transmission electron microscope demonstrated the anticipated van der Waals energy-based retraction force and enabled us to place quantitative limits on the static and dynamic interwall frictional forces between nested nanotubes. Repeated extension and retraction of telescoping nanotube segments revealed no wear or fatigue on the atomic scale. Hence, these nanotubes may constitute near perfect, wear-free surfaces.
1,232 citations