scispace - formally typeset
Open AccessJournal ArticleDOI

Waste glass powder as partial replacement of cement for sustainable concrete practice

Reads0
Chats0
TLDR
In this paper, chemical properties of both clear and colored glass were evaluated using X-ray fluorescence (XRF) technique and found minor differences in composition between clear and coloured glasses.
Abstract
Million tons of waste glass is being generated annually all over the world. Once the glass becomes a waste it is disposed as landfills, which is unsustainable as this does not decompose in the environment. Glass is principally composed of silica. Use of milled (ground) waste glass in concrete as partial replacement of cement could be an important step toward development of sustainable (environmentally friendly, energy-efficient and economical) infrastructure systems. When waste glass is milled down to micro size particles, it is expected to undergo pozzolanic reactions with cement hydrates, forming secondary Calcium Silicate Hydrate (C–S–H). In this research chemical properties of both clear and colored glass were evaluated. Chemical analysis of glass and cement samples was determined using X-ray fluorescence (XRF) technique and found minor differences in composition between clear and colored glasses. Flow and compressive strength tests on mortar and concrete were carried out by adding 0–25% ground glass in which water to binder (cement + glass) ratio is kept the same for all replacement levels. With increase in glass addition mortar flow was slightly increased while a minor effect on concrete workability was noted. To evaluate the packing and pozzolanic effects, further tests were also conducted with same mix details and 1% super plasticizing admixture dose (by weight of cement) and generally found an increase in compressive strength of mortars with admixture. As with mortar, concrete cube samples were prepared and tested for strength (until 1 year curing). The compressive strength test results indicated that recycled glass mortar and concrete gave better strength compared to control samples. A 20% replacement of cement with waste glass was found convincing considering cost and the environment.

read more

Citations
More filters
Journal ArticleDOI

Silica fume and waste glass in cement concrete production: A review

TL;DR: In this paper, the influence of silica fume and waste glass on the workability, strength, and durability properties of concrete was studied, and the microstructural analysis was also studied.
Journal ArticleDOI

Recycling of landfill wastes (tyres, plastics and glass) in construction - A review on global waste generation, performance, application and future opportunities

TL;DR: In this article, the authors reviewed three of the largest volume of landfill waste materials (tyres, plastics and glass) that are becoming a major concern for many countries and highlighted future strategies for improved waste management, potential investment and research directions.
Journal ArticleDOI

A critical review of waste glass powder - Multiple roles of utilization in cement-based materials and construction products.

TL;DR: It is concluded that GP is an innovative and promising eco-supplementary cementitious material and suitable for manufacturing eco-cement, artificial lightweight aggregate and composite phase change material.
Journal ArticleDOI

One-part geopolymer cement from slag and pretreated paper sludge

TL;DR: In this article, the effects of increasing the amount of paper sludge pretreated with a constant amount of sodium hydroxide (2% of slag) on mechanical strength, heat evolution, setting time and durability were analyzed.
Journal ArticleDOI

Durability and strength characteristics of high-strength concrete incorporated with volcanic pumice powder and polypropylene fibers

TL;DR: In this article, the partial replacement of volcanic pumice powder (VPP) for use as a supplementary cementitious material was investigated for use in high-strength concrete mixtures, and several tests, including slump, compressive strength, indirect tensile strength, flexural strength, water absorption, initial surface absorption and sorptivity, were conducted to evaluate HSC performance.
References
More filters
Journal ArticleDOI

Trends and developments in green cement and concrete technology

TL;DR: A review of the current state-of-the-art and standards underpinning the production and use of OPC-based cements and concretes can be found in this paper.
BookDOI

Tracking Industrial Energy Efficiency and CO2 Emissions

Aie
TL;DR: Tracking Industrial Energy Efficiency and CO2 Emissions (TIHE) as mentioned in this paper ) is a G8-funded effort to track industrial energy efficiency over the last 25 years and identify the leaders and the laggards.
Journal ArticleDOI

Characteristics and pozzolanic reactivity of glass powders

TL;DR: In this paper, the morphology, fineness and pozzolanic activity of four glass powders (GP-fine and GP-dust) were investigated from the screening of crushed waste glasses, one from a dust collector for the glass crushing process and two from further grinding of the powder from the dust collector in a ball mill.
Journal ArticleDOI

Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement

TL;DR: In this article, the use of milled waste glass, as partial replacement of cement, is estimated to produce significant gains in strength and durability of recycled aggregate concrete, which is also found to suppress alkali-silica reactions.
Journal ArticleDOI

Sustainability of Concrete Construction

TL;DR: In this paper, a sustainable concrete structure is constructed to ensure that the total environmental impact during its life cycle, including its use, will be minimal, which is important to the well-being of our planet, continued growth of a society, and human development.
Related Papers (5)