scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Wearable High-Performance Supercapacitors Based on Silver-Sputtered Textiles with FeCo2S4–NiCo2S4 Composite Nanotube-Built Multitripod Architectures as Advanced Flexible Electrodes

Jian Zhu1, Shaochun Tang1, Juan Wu1, Shi Xiling1, Baogang Zhu1, Xiangkang Meng1 
01 Jan 2017-Advanced Energy Materials (John Wiley & Sons, Ltd)-Vol. 7, Iss: 2, pp 1601234
TL;DR: In this article, a novel flexible electrode with nanotube-built multitripod architectures of ternary metal sulfides' composites (FeCo2S4−NiCo 2S4) on a silver-sputtered textile cloth is presented.
Abstract: To achieve high-performance wearable supercapacitors (SCs), a new class of flexible electrodes with favorable architectures allowing large porosity, high conductivity, and good mechanical stability is strongly needed. Here, this study reports the rational design and fabrication of a novel flexible electrode with nanotube-built multitripod architectures of ternary metal sulfides' composites (FeCo2S4–NiCo2S4) on a silver-sputtered textile cloth. Silver sputtering is applicable to almost all kinds of textiles, and S2− concentration is optimized during sulfidation process to achieve such architectures and also a complete sulfidation assuring high conductivity. New insights into concentration-dependent sulfidation mechanism are proposed. The additive-free FeCo2S4–NiCo2S4 electrode shows a high specific capacitance of 1519 F g−1 at 5 mA cm−2 and superior rate capability (85.1% capacitance retention at 40 mA cm−2). All-solid-state SCs employing these advanced electrodes deliver high energy density of 46 W h kg−1 at 1070 W kg−1 as well as achieve remarkable cycling stability retaining 92% of initial capacitance after 3000 cycles at 10 mA cm−2, and outstanding reliability with no capacitance degradation under large twisting. These are attributed to the components' synergy assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. An almost linear increase in capacitance with devices' area indicates possibility to meet various energy output requirements. This work provides a general, low-cost route to wearable power sources.
Citations
More filters
Journal ArticleDOI
TL;DR: The state-of-the-art advancements in FSSCs are reviewed to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs.
Abstract: Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials The next sections briefly summarise the latest progress in flexible electrodes (ie, freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (ie, aqueous, organic, ionic liquids and redox-active gels) Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal–organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed The final section highlights current challenges and future perspectives on research in this thriving field

1,210 citations

Journal ArticleDOI
TL;DR: This review summarizes the latest advances in this emerging field of "bio-integrated" technologies in a comprehensive manner that connects fundamental developments in chemistry, material science, and engineering with sensing technologies that have the potential for widespread deployment and societal benefit in human health care.
Abstract: Bio-integrated wearable systems can measure a broad range of biophysical, biochemical, and environmental signals to provide critical insights into overall health status and to quantify human performance. Recent advances in material science, chemical analysis techniques, device designs, and assembly methods form the foundations for a uniquely differentiated type of wearable technology, characterized by noninvasive, intimate integration with the soft, curved, time-dynamic surfaces of the body. This review summarizes the latest advances in this emerging field of “bio-integrated” technologies in a comprehensive manner that connects fundamental developments in chemistry, material science, and engineering with sensing technologies that have the potential for widespread deployment and societal benefit in human health care. An introduction to the chemistries and materials for the active components of these systems contextualizes essential design considerations for sensors and associated platforms that appear in f...

727 citations

Journal ArticleDOI
TL;DR: An overview of the energy storage devices from conventional capacitors to supercapacitors to hybrid systems and ultimately to batteries is provided, although the focus is kept on capacitive and hybrid energy storage systems.
Abstract: Over the past decade, electrochemical energy storage (EES) devices have greatly improved, as a wide variety of advanced electrode active materials and new device architectures have been developed. These new materials and devices should be evaluated against clear and rigorous metrics, primarily based on the evidence of real performances. A series of criteria are commonly used to characterize and report performance of EES systems in the literature. However, as advanced EES systems are becoming more and more sophisticated, the methodologies to reliably evaluate the performance of the electrode active materials and EES devices need to be refined to realize the true promise as well as the limitations of these fast-moving technologies, and target areas for further development. In the absence of a commonly accepted core group of metrics, inconsistencies may arise between the values attributed to the materials or devices and their real performances. Herein, we provide an overview of the energy storage devices from conventional capacitors to supercapacitors to hybrid systems and ultimately to batteries. The metrics for evaluation of energy storage systems are described, although the focus is kept on capacitive and hybrid energy storage systems. In addition, we discuss the challenges that still need to be addressed for establishing more sophisticated criteria for evaluating EES systems. We hope this effort will foster ongoing dialog and promote greater understanding of these metrics to develop an international protocol for accurate assessment of EES systems.

695 citations

Journal ArticleDOI
TL;DR: Mixed metal sulfides (MMS) have attracted increased attention as promising electrode materials for electrochemical energy storage and conversion systems including lithium-ion batteries (LIBs), SIBs, hybrid supercapacitors (HSCs), metal-air batteries (MABs), and water splitting as discussed by the authors.
Abstract: Mixed metal sulfides (MMSs) have attracted increased attention as promising electrode materials for electrochemical energy storage and conversion systems including lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), hybrid supercapacitors (HSCs), metal–air batteries (MABs), and water splitting. Compared with monometal sulfides, MMSs exhibit greatly enhanced electrochemical performance, which is largely originated from their higher electronic conductivity and richer redox reactions. In this review, recent progresses in the rational design and synthesis of diverse MMS-based micro/nanostructures with controlled morphologies, sizes, and compositions for LIBs, SIBs, HSCs, MABs, and water splitting are summarized. In particular, nanostructuring, synthesis of nanocomposites with carbonaceous materials and fabrication of 3D MMS-based electrodes are demonstrated to be three effective approaches for improving the electrochemical performance of MMS-based electrode materials. Furthermore, some potential challenges as well as prospects are discussed to further advance the development of MMS-based electrode materials for next-generation electrochemical energy storage and conversion systems.

640 citations

Journal Article
TL;DR: In this paper, a symmetric supercapacitor based on Nanoporous Carbon (NPC) was designed by direct carbonization of Zn-based metal-organic frameworks (MOFs) without using an additional precursor.
Abstract: Nanoporous carbon (NPC) materials with high specific surface area have attracted considerable attention for electrochemical energy storage applications. In the present work, we have designed novel symmetric supercapacitors based on NPC by direct carbonization of Zn-based metal-organic frameworks (MOFs) without using an additional precursor. By controlling the reaction conditions in the present study, we synthesized NPC with two different particle sizes. The effects of particle size and mass loadings on supercapacitor performance have been carefully evaluated. Our NPC materials exhibit excellent electrochemical performance with a maximum specific capacitance of 251 F g-1 in 1 M H2SO4 electrolyte. The symmetric supercapacitor studies show that these efficient electrodes have good capacitance, high stability, and good rate capability.

365 citations

References
More filters
Journal ArticleDOI
TL;DR: This review describes the most recent advances in flexible energy-storage devices, including flexible lithium-ion batteries and flexible supercapacitors, based on carbon materials and a number of composites and flexible micro-supercapacitor.
Abstract: Flexible energy-storage devices are attracting increasing attention as they show unique promising advantages, such as flexibility, shape diversity, light weight, and so on; these properties enable applications in portable, flexible, and even wearable electronic devices, including soft electronic products, roll-up displays, and wearable devices. Consequently, considerable effort has been made in recent years to fulfill the requirements of future flexible energy-storage devices, and much progress has been witnessed. This review describes the most recent advances in flexible energy-storage devices, including flexible lithium-ion batteries and flexible supercapacitors. The latest successful examples in flexible lithium-ion batteries and their technological innovations and challenges are reviewed first. This is followed by a detailed overview of the recent progress in flexible supercapacitors based on carbon materials and a number of composites and flexible micro-supercapacitors. Some of the latest achievements regarding interesting integrated energy-storage systems are also reviewed. Further research direction is also proposed to surpass existing technological bottle-necks and realize idealized flexible energy-storage devices.

1,107 citations

Journal ArticleDOI
TL;DR: Flexible solid-state supercapacitors (SCs) have attracted increasing interest because they can provide substantially higher specific/volumetric energy density compared to conventional capacitors.
Abstract: Increasing power and energy demands for next-generation portable and flexible electronics such as roll-up displays, photovoltaic cells, and wearable devices have stimulated intensive efforts to explore flexible, lightweight and environmentally friendly energy storage devices. Flexible solid-state supercapacitors (SCs) have attracted increasing interest because they can provide substantially higher specific/volumetric energy density compared to conventional capacitors. Additionally, flexible solid-state SCs are typically small in size, highly reliable, light-weight, easy to handle, and have a wide range of operation temperatures. In this regard, solid-state SCs hold great promise as new energy storage devices for flexible and wearable electronics. In this article, we review recent achievements in the design, fabrication and characterization of flexible solid-state SCs. Moreover, we also discuss the current challenges and future opportunities for the development of high-performance flexible solid-state SCs.

1,105 citations

Journal ArticleDOI
TL;DR: This work reported the first successful preparation of nickel cobaltite aerogels with the epoxide-driven sol–gel process, which showed an extremely high-specific capacitance of 1400 F g under a mass loading of 0.4 mg cm 2 at a sweep rate of 25mV s.
Abstract: Adv. Mater. 2010, 22, 347–351 2010 WILEY-VCH Verlag Gm The ever worsening energy depletion and global warming issues call for not only urgent development of clean alternative energies and emission control of global warming gases, but also more advanced energy storage and management devices. Supercapacitors, offering transient but extremely high powers, are probably the most important next generation energy storage device. To boost the specific capacitance of supercapacitors, the specific surface area of the electrode materials needs to be as high as possible to promote the electric double-layer capacitances and to accommodate a large amount of superficial electroactive species to participate in faradaic redox reactions. In addition, suitable pore sizes, 2–5 nm, of the porous electrode materials are critical to ease the mass transfer of electrolytes within the pores for fast redox reactions and double-layer charging/discharging. Aerogels are a class of mesoporous materials possessing highly specific surface areas and porosities, from which promising applications in a wide range of areas have been investigated. They are composed of 3D networks of nanoparticles with an average pore size of several nanometers, adjustably falling within the optimal pore sizes of 2–5 nm. Consequently, aerogels are a promising candidate for supercapacitor applications. As to the electrode material, electroactive materials possessing multiple oxidation states/structures that enable rich redox reactions for pseudocapacitance generation are desirable for supercapacitors. Transition metal oxides are such a class of materials that have drawn extensive and intensive research attention in recent years. Among them, RuO2 is themost prominent one with a specific capacitance as high as 1580F g , probably the highest ever reported. The commercialization of RuO2 based supercapacitors, however, is not promising because of the high cost and rareness of Ru. Spinel nickel cobaltite (NiCo2O4) is a low-cost, environmentally friendly transition metal oxide, which has been employed in electrocatalytic water splitting (oxygen evolution) and lithium ion batteries. Its application in supercapacitors, however, received much less attention. Nickel cobaltite has been reported to possess a much better electronic conductivity, at least two orders of magnitude higher, and higher electrochemical activity than those of nickel oxides and cobalt oxides. It is expected to offer richer redox reactions, including contributions from both nickel and cobalt ions, than the two corresponding single component oxides and is a potential cost-effective alternative for RuO2. Based on the above considerations, one would expect nickel cobaltite aerogels, with anticipated good electronic conductivity, low diffusion resistance to protons/cations, easy electrolyte penetration, and high electroactive areas to be a promising candidate for the construction of next-generation, ultrahighperformance supercapacitors. Traditionally, aerogels are prepared with sol–gel processes by taking corresponding alkoxides as the precursors. Alkoxides are generally expensive and sensitive to moisture and heat, requiring careful handling. Recently, to tackle these drawbacks, the epoxide synthetic route, enabling the use of low-cost and stable metal salts as the precursors, was successfully developed to prepare metal oxide aerogels. In this work, we reported the first successful preparation of nickel cobaltite aerogels with the epoxide-driven sol–gel process. The effects of the post-gel-drying calcination temperature on the critical properties of the product aerogels were investigated. At a starting Ni/Co ratio of 0.5 and a post-gel-drying calcination temperature of 200 8C, an optimal combination of composition, crystallinity, specific surface area, pore volume, and pore size was achieved to afford the nickel cobaltite aerogels that showed an extremely high-specific capacitance of 1400 F g 1 under a mass loading of 0.4 mg cm 2 at a sweep rate of 25mV s 1 within a potential window of 0.04 to 0.52V in a 1 M NaOH solution. The excellent reversibility and cycle stability of the product aerogels were also demonstrated. A stoichiometric mixture of nickel and cobalt chlorides was used as the precursor for the preparation of the nickel cobaltite aerogels. After the gel is dried in supercritical carbon dioxide, a post-gel-drying calcination is generally required to acquire preferred composition and/or better crystallinity of the products. The post-gel-drying calcination temperature is thus an important processing parameter to be studied. For referring convenience, we term the product aerogels as Ni–Co–O–T, with Tdenoting the calcination temperature. The T block is omitted for as-prepared samples. Also, for comparison purposes, NiO and Co3O4 aerogels were prepared, termed as Ni–O–T and Co–O–T, respectively. Figure 1a shows the X-ray diffraction (XRD) patterns of the as-prepared product aerogels and those samples calcined at 200 and 300 8C. Surprisingly, nickel cobaltite was formed even at the as-prepared condition. The diffraction peak located at the 2u value

1,084 citations

Journal ArticleDOI
TL;DR: An anion exchange method is reported to synthesize a complex ternary metal sulfides hollow structure, namely nickel cobalt sulfide ball-in-ball hollow spheres that show long-term cycling performance and potential application in high-performance electrochemical capacitors.
Abstract: While the synthesis of hollow structures of transition metal oxides is well established, it is extremely challenging to fabricate complex hollow structures for mixed transition metal sulfides. Here we report an anion exchange method to synthesize a complex ternary metal sulfides hollow structure, namely nickel cobalt sulfide ball-in-ball hollow spheres. Uniform nickel cobalt glycerate solid spheres are first synthesized as the precursor and subsequently chemically transformed into nickel cobalt sulfide ball-in-ball hollow spheres. When used as electrode materials for electrochemical capacitors, these nickel cobalt sulfide hollow spheres deliver a specific capacitance of 1,036 F g(-1) at a current density of 1.0 A g(-1). An asymmetric supercapacitor based on these ball-in-ball structures shows long-term cycling performance with a high energy density of 42.3 Wh kg(-1) at a power density of 476 W kg(-1), suggesting their potential application in high-performance electrochemical capacitors.

1,053 citations

Journal ArticleDOI
TL;DR: The development of highly conductive NiCo2S4 single crystalline nanotube arrays grown on a flexible carbon fiber paper (CFP), which can serve not only as a good pseudocapacitive material but also as a three-dimensional conductive scaffold for loading additional electroactive materials.
Abstract: We report on the development of highly conductive NiCo2S4 single crystalline nanotube arrays grown on a flexible carbon fiber paper (CFP), which can serve not only as a good pseudocapacitive material but also as a three-dimensional (3D) conductive scaffold for loading additional electroactive materials. The resulting pseudocapacitive electrode is found to be superior to that based on the sibling NiCo2O4 nanorod arrays, which are currently used in supercapacitor research due to the much higher electrical conductivity of NiCo2S4. A series of electroactive metal oxide materials, including CoxNi1–x(OH)2, MnO2, and FeOOH, were deposited on the NiCo2S4 nanotube arrays by facile electrodeposition and their pseudocapacitive properties were explored. Remarkably, the as-formed CoxNi1–x(OH)2/NiCo2S4 nanotube array electrodes showed the highest discharge areal capacitance (2.86 F cm–2 at 4 mA cm–2), good rate capability (still 2.41 F cm–2 at 20 mA cm–2), and excellent cycling stability (∼4% loss after the repetitive ...

1,008 citations