Open Access
Welding Metallurgy of
Reads0
Chats0
About:
The article was published on 1987-01-01 and is currently open access. It has received 991 citations till now. The article focuses on the topics: Welding.read more
Citations
More filters
Journal ArticleDOI
Heat-Affected Zone Liquation Cracking Resistance of Friction Stir Processed Aluminum-Copper Alloy AA 2219
TL;DR: In this article, the effect of friction stir processing on heat-affected zone (HAZ) liquation cracking resistance of aluminum-copper alloy AA 2219 was evaluated and it was shown that the increased cracking susceptibility of the FSPed material is due to an increase in the amount of liquating θ phase (equilibrium Al2Cu) and an increase of the population of grain boundary θ particles.
ReportDOI
Evaluation of Flash Bainite in 4130 Steel
TL;DR: The Flash Bainite process for steels has the potential to reduce product cost and weight while also enhancing mechanical performance as mentioned in this paper, however, it is not suitable for high strength applications.
Welding of dissimilar metals in different welding positions
TL;DR: The three boiling water reactors (BWR) in Oskarshamn produce about 10 % of the electrical power in Sweden as mentioned in this paper, and the combination of intense radiation fluxes and high temperatures in nuclear reactors crea...
Journal ArticleDOI
Solidification cracking susceptibility associated with a teardrop-shaped weld pool
TL;DR: For straight columnar dendritic grains growing side by side, |dT/d(fS)1/2| near their roots can be the crack-susceptibility index as verified against welds made as mentioned in this paper.
Journal ArticleDOI
Effect of welding speed on mechanical and fracture behavior of nitinol laser-joints
TL;DR: In this paper, the effect of a pulsed Nd:YAG laser speed welding of Nitinol plates on the microstructure, mechanical properties and fracture behavior was investigated.
References
More filters
Journal ArticleDOI
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
TL;DR: In this article, the state of the art in selective laser sintering/melting (SLS/SLM) processing of aluminium powders is reviewed from different perspectives, including powder metallurgy (P/M), pulsed electric current (PECS), and laser welding of aluminium alloys.
Journal ArticleDOI
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Leifeng Liu,Qingqing Ding,Yuan Zhong,Ji Zou,Jing Wu,Yu-Lung Chiu,Jixue Li,Ze Zhang,Qian Yu,Zhijian Shen +9 more
TL;DR: In this article, the authors show that the pre-existing dislocation network, which maintains its configuration during the entire plastic deformation, is an ideal modulator that is able to slow down but not entirely block the dislocation motion.
Journal ArticleDOI
Critical review of automotive steels spot welding: process, structure and properties
TL;DR: In this article, the fundamental understanding of structure-properties relationship in automotive steels resistance spot welds is discussed. And a brief review of friction stir spot welding, as an alternative to RSW, is also included.
Journal ArticleDOI
Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
TL;DR: In this article, a unified equation to compute the energy density is proposed to compare works performed with distinct equipment and experimental conditions, covering the major process parameters: power, travel speed, heat source dimension, hatch distance, deposited layer thickness and material grain size.
Journal ArticleDOI
Using deep neural network with small dataset to predict material defects
TL;DR: This study attempted to predict solidification defects by DNN regression with a small dataset that contains 487 data points and found that a pre-trained and fine-tuned DNN shows better generalization performance over shallow neural network, support vector machine, and DNN trained by conventional methods.