scispace - formally typeset
Search or ask a question

Welding Metallurgy of

01 Jan 1987-
About: The article was published on 1987-01-01 and is currently open access. It has received 991 citations till now. The article focuses on the topics: Welding.
Citations
More filters
Journal ArticleDOI
TL;DR: In this article, the state of the art in selective laser sintering/melting (SLS/SLM) processing of aluminium powders is reviewed from different perspectives, including powder metallurgy (P/M), pulsed electric current (PECS), and laser welding of aluminium alloys.

1,172 citations


Cites background from "Welding Metallurgy of"

  • ...(......................................................3/)(16 33* VSL GSG ∆=∆ θπγ According to Kou [144] and Savage [145], growth of the solid in fusion welding is perceived as being initiated by epitaxial growth from the substrate and proceeds by competitive growth toward the center line of the weld....

    [...]

  • ...100 the predominant mechanism of solidification in fusion welding is the competitive growth in the weld fusion zone, Kou [144] identified and discussed the details of other mechanisms such as dendrite fragmentation, grain detachment, heterogeneous nucleation and surface nucl eatio that may tend can interrupt and/or dominate the solidification structure in fusion welding....

    [...]

  • ...According to Kou [144] and Savage [145], growth of the solid in fusion welding is...

    [...]

  • ...Whereas, the predominant mechanism of solidification in fusion welding is the competitive growth in the weld fusion zone, Kou [144] identified and discussed the details of other mechanisms such as dendrite fragmentation, grain detachment, heterogeneous nucleation and surface nucleatio that may tend can interrupt and/or dominate the solidification structure in fusion welding....

    [...]

Journal ArticleDOI
TL;DR: In this article, the authors show that the pre-existing dislocation network, which maintains its configuration during the entire plastic deformation, is an ideal modulator that is able to slow down but not entirely block the dislocation motion.

557 citations

Journal ArticleDOI
TL;DR: In this article, the fundamental understanding of structure-properties relationship in automotive steels resistance spot welds is discussed. And a brief review of friction stir spot welding, as an alternative to RSW, is also included.
Abstract: Spot welding, particularly resistance spot welding (RSW), is a critical joining process in automotive industry. The development of advanced high strength steels for applications in automotive industry is accompanied with a challenge to better understand the physical and mechanical metallurgy of these materials during RSW. The present paper critically reviews the fundamental understanding of structure–properties relationship in automotive steels resistance spot welds. The focus is on the metallurgical characteristics, hardness–microstructure correlation, interfacial to pullout failure mode transition and mechanical performance of steel resistance spot welds under quasi-static, fatigue and impact loading conditions. A brief review of friction stir spot welding, as an alternative to RSW, is also included.

369 citations


Cites background from "Welding Metallurgy of"

  • ...Despite the fact that Schaeffler diagram predicts two phases (austenite plus ferrite) in the FZ of AISI 304 weld nugget microstructure, under rapid solidification conditions such as laser beam welding, a shift in solidification mode may occur.(90) It is generally believed that the change in solidification mode can often result in a fully austenitic microstructure compared to the two phase (ferrite plus austenite) microstructure that is commonly found after primary ferrite solidification....

    [...]

  • ...In coarse grained region, which is beside the FZ, both high cooling rate and large austenite grain size coupled with the formation of the carbon rich austenite promote the formation of the martensite.(90) Figure 15 shows the microstructure gradient in TRIP780 RSW....

    [...]

  • ...The HAZ in carbon steel weldments can be divided into three distinct subregions: (i) upper critical HAZ (UCHAZ): This region experiences peak temperatures above Ac3 transforming BM microstructure into austenite.(90) Depending on the peak temperature the supercritical HAZ can be divided to the following zones: coarse grained HAZ (CGHAZ) and fine grained HAZ....

    [...]

  • ...It is generally believed that the change in solidification mode can often result in a fully austenitic microstructure compared to the two phase (ferrite plus austenite) microstructure that is commonly found after primary ferrite solidification.(90,95,96) Although the change in solidification mode of stainless steel in RSW has not been studied yet, very high cooling rate in RSW process can explain the formation of a fully austenitic weld nugget, as it is the case for laser beam welding....

    [...]

  • ...If this temperature is above Mf, there can be untransformed austenite left in the FZ and it can redecompose to untempered martensite upon cooling to room temperature after tempering.(90) For a particular tempering time and tempering current, there is a minimum cooling time to achieve PF mode....

    [...]

Journal ArticleDOI
TL;DR: In this article, a unified equation to compute the energy density is proposed to compare works performed with distinct equipment and experimental conditions, covering the major process parameters: power, travel speed, heat source dimension, hatch distance, deposited layer thickness and material grain size.

369 citations

Journal ArticleDOI
TL;DR: This study attempted to predict solidification defects by DNN regression with a small dataset that contains 487 data points and found that a pre-trained and fine-tuned DNN shows better generalization performance over shallow neural network, support vector machine, and DNN trained by conventional methods.

314 citations


Cites background from "Welding Metallurgy of"

  • ...Solidification crack is one of the most serious defects which occurs widely in welding [27,28], casting [29–31] and additive manufacturing (AM) [32,33], which occurs at the last stage of solidification when liquid films exist between dendrites boundaries where local strains cannot be accommodated by liquid feeding and solid deformation....

    [...]

References
More filters
Journal ArticleDOI
TL;DR: In this article, a solidification model for modeling eutectic bands along grain boundaries is presented. But the model is based on solute convection in grain boundary liquid films induced by tensile strains.
Abstract: Large tensile strains acting on the solidifying weld metal can cause the formation of eutectic bands along grain boundaries. These eutectic bands can lead to severe liquation in the partially melted zone of a subsequent overlapping weld. This can increase the risk of heat-affected zone liquation cracking. In this paper, we present a solidification model for modeling eutectic bands. The model is based on solute convection in grain boundary liquid films induced by tensile strains. The proposed model was used to study the influence of strain rate on the thickness of eutectic bands in Alloy 718. It was found that when the magnitude of the strain rate is 10 times larger than that of the solidification rate, the calculated eutectic band thickness is about 200 to 500% larger (depending on the solidification rate) as compared to when the strain rate is zero. In the paper, we also discuss how eutectic bands may form from hot cracks.

1 citations

Book ChapterDOI
01 Jan 1993
TL;DR: In this article, Eddy current testing may provide a suitable method of inspection the internal structure of MMCs through differences in electrical conductivity and/or magnetic permeability between fibers and matrix.
Abstract: Metal matrix composites (MMCs) have increasingly found a home in high technology industries. Even though much research and money have been invested in their conception, manufacturing and incorporation into load bearing structures, the development of suitable nondestructive evaluation technique to test their integrity has lagged behind. Eddy current testing may provide a suitable method of inspection the internal structure of MMCs through differences in electrical conductivity and/or magnetic permeability between fibers and matrix.

1 citations

Journal ArticleDOI
TL;DR: The microstructure and mechanical properties of dissimilar butt-joints of high-strength low-alloy steel to austenitic high Mn TRIP steels produced by manual TIG welding with AISI 309L fill...
Abstract: The microstructure and mechanical properties of dissimilar butt-joints of high-strength low-alloy steel to austenitic high Mn TRIP steels produced by manual TIG welding with AISI 309L fill...

1 citations

Book ChapterDOI
31 Aug 2020
TL;DR: In this paper, the authors present a contextualized approach to destructive and non-destructive techniques used to measure residual stresses generated by arc welding, as well as the influence of these distortions and stresses on the welded structures and, finally, present possible control techniques.
Abstract: Arc welding processes are widely used in the industrial sector, mainly for productivity and continuity. However, these processes have several undesirable results, such as distortions and residual stresses (RS). When compared to other welding processes, the RS level can make the welded joint unfeasible. Many studies on these arc welding discontinuities have been carried out in experimental and numerical areas about their measurement, analysis, and control, however, not yet clearly enlightened, since it is a complex topic, both for industry and academia, needing to be deepened. This study aims to present a contextualized approach to destructive and non-destructive techniques used to measure RS generated by arc welding, as well as the influence of these distortions and stresses on the welded structures and, finally, to present possible control techniques. Finally, this study highlights the use of CW-GMAW welding, which achieved a reduction in stress and distortion levels, due to the introduction of a non-energized wire in the arc of the GMAW process, as evidenced by the results of RS measured by X-ray diffraction (XRD) and acoustic birefringence (AB). Thus, in this context, the approach to RS in arc welding presented here is extremely relevant for researchers involved with the topic.

1 citations