scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Wide-band supercontinuum generation in mid-IR using polarization maintaining chalcogenide photonic quasi-crystal fiber.

01 Jun 2017-Applied Optics (Optical Society of America)-Vol. 56, Iss: 16, pp 4797-4806
TL;DR: The proposed PQF-based SC source is a good candidate for applications such as optical sensing, frequency metrology, and optical tomography as the two orthogonally polarized modes allow the high degree of freedom in tuning the properties of the SC.
Abstract: We report a polarization maintaining chalcogenide (ChG) photonic quasicrystal fiber (PQF) for wide-band mid-IR (MIR) supercontinuum (SC) generation The numerical demonstration of SC generation in the proposed PQF spans from 2 to 15 μm wavelengths for a pulse power of 2 kW Besides, the proposed PQF offers a high birefringence (10−3 to 10−2) from 35 to 15 μm wavelengths and exhibits a low confinement loss (10−7 to 10−1) for the wavelengths from 2 to 15 μm with single mode behavior The proposed Ge115As24Se645 PQF is designed with zero dispersion wavelengths (ZDWs) at 433 and 446 μm for X and Y polarized modes within the wavelength range of 2–15 μm The polarized spectral broadening of the continuum is realized for the first time from 2 to 15 μm using the proposed PQF with a length of 8 mm Hence, the two orthogonally polarized modes allow the high degree of freedom in tuning the properties of the SC Thus, the proposed PQF-based SC source is a good candidate for applications such as optical sensing, frequency metrology, and optical tomography
Citations
More filters
01 Jan 2002
TL;DR: In this article, a review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime.
Abstract: A topical review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime. Results from numerical simulations are used to discuss the temporal and spectral characteristics of the supercontinuum, and to interpret the physics of the underlying spectral broadening processes. Particular attention is given to the case of supercontinuum generation seeded by femtosecond pulses in the anomalous group velocity dispersion regime of photonic crystal fiber, where the processes of soliton fission, stimulated Raman scattering, and dispersive wave generation are reviewed in detail. The corresponding intensity and phase stability properties of the supercontinuum spectra generated under different conditions are also discussed.

360 citations

Journal ArticleDOI
TL;DR: In this article, an ultra-broadband coherent mid-infrared supercontinuum (SC) extending from 1.25 to 20μm was generated using a novel AsSe2-As2S5 multimaterial photonic crystal fiber (PCF).
Abstract: In this paper, we report on the simulation of an ultra-broadband coherent mid-infrared supercontinuum (SC) extending from 1.25 to 20 μm generated using a novel AsSe2-As2S5 multimaterial photonic crystal fiber (PCF). The proposed fiber is composed of a core made of AsSe2 glass and a surrounding cladding made of As2S5 glass. The hybrid PCF is designed to have a zero-dispersion wavelength (ZDW) of 3.3 μm with an overall highly engineered group velocity dispersion shifted to the mid-infrared wavelength region. The SC is generated by pumping 50 fs pulses at 4 μm emitted from an optical parameter amplifier with low energy of 0.625 nJ. The pumping wavelength is selected in the anomalous dispersion regime close to the ZDW. The widening of the SC is mainly based on the soliton effects in the anomalous dispersion region combined with self-phase modulation, cross-phase modulation, stimulated Raman scattering, four-wave mixing, and dispersive wave. The obtained SC shows a high degree of coherence and a 15 fs temporal compressed pulse is generated in only 5 mm long AsSe2-As2S5 hybrid PCF. The power proportion of the SC generated beyond 4 μm is 98% with its long wavelength edge up to 20 μm. To the best of our knowledge, the obtained SC is the first broadest spectrum reported in the mid-infrared region with very low energy. Our results highlight the potential of the novel chalcogenide AsSe2-As2S5 multimaterial PCF to emit across the ultra-broadband mid-infrared atmospheric windows and the molecular fingerprint region.

22 citations

Journal ArticleDOI
TL;DR: In this paper, a polarization-maintaining CS2-core photonic crystal fiber is designed and it is demonstrated that the x-polarization fundamental mode has an all-normal dispersion profile and the corresponding y-polarsization fundamental modes has an anomalous dispersion profiles for a pump wavelength of 1.76 μm.
Abstract: In this paper, we design a polarization-maintaining CS2-core photonic crystal fiber (PM-CCPCF). The two air holes in the x direction are infiltrated with C2H5OH in order to introduce birefringence. By optimizing the structure parameters of the PM-CCPCF, it is demonstrated that the x-polarization fundamental mode has an all-normal dispersion profile and the corresponding y-polarization fundamental mode has an anomalous dispersion profile for a pump wavelength of 1.76 μm. Then, we investigate the supercontinuum (SC) generations when different fiber lengths, pump peak powers, and pump pulse widths are chosen, respectively. Simulation results show that for the x-polarization and y-polarization fundamental modes, highly coherent SCs can be generated by appropriately choosing the fiber length and pump pulse parameters. Finally, nonlinear propagation dynamics are analysed when the optimized fiber length and pump pulse parameters are used. The bandwidth of the SCs generated for the x-polarization and y-polarization fundamental modes can be up to 0.82 and 1.26 octave, respectively.

18 citations

01 Jan 2020
TL;DR: In this article, the authors present a survey of the applications of supercontinuum sources and apply them to the field of littérature, including the use of microspectroscopies.
Abstract: .................................................................................................................................... III TABLE DES MATIERES ............................................................................................................... IV LISTE DES TABLEAUX................................................................................................................. VI LISTE DES FIGURES ................................................................................................................... VII LISTE DES ABBREVIATIONS ET DES ACRONYMES ........................................................... XI REMERCIEMENTS ..................................................................................................................... XIV AVANT-PROPOS ..........................................................................................................................XV 0. INTRODUCTION .................................................................................................................... 1 0.1 Les motivations ......................................................................................................................................................... 1 0.2 Pourquoi le supercontinuum (en bref...) ? ..................................................................................................... 1 0.3 Pourquoi l’infrarouge moyen? ............................................................................................................................ 2 0.4 Pourquoi la fibre optique? .................................................................................................................................... 4 1. CHAPITRE 1 : BASES THEORIQUES ET APPLICATIONS SUR LA GENERATION DE SUPERCONTINUUM ............................................................................................................... 6 1.1 Applications des sources de supercontinuum .............................................................................................. 7 1.1.1 La télédétection ..................................................................................................................................................................... 8 1.1.2 La microspectroscopie .................................................................................................................................................... 14 1.2 Revue de littérature ............................................................................................................................................. 19 1.2.1 Les lasers de pompage disponibles émettant dans le mid-IR ...................................................................... 19 1.2.2 Les SC pompés par des lasers à l’état solide ......................................................................................................... 28 1.2.3 Les SC pompés par des lasers à fibre optique ...................................................................................................... 33 1.2.4 Conclusion de la revue de littérature ....................................................................................................................... 38 1.3 La fibre optique, sa conception et l’optique linéaire ............................................................................... 39 1.3.1 La fibre optique à saut d’indice ................................................................................................................................... 39 1.3.2 Le choix des verres ............................................................................................................................................................ 40 1.3.3 La constante de propagation et la dispersion de guidage .............................................................................. 44 1.3.4 Les techniques pour ajuster la dispersion de guidage ..................................................................................... 45

12 citations

Journal ArticleDOI
01 Mar 2020
TL;DR: In this article, both the birefringence and dispersion properties of a polarization-maintaining chalcogenide (ChG) photonic crystal fiber are numerically investigated by means of the finite element method.
Abstract: The photonic crystal fiber (PCF) with a bunch of air holes enclosing the silica core field has momentous and compelling attributes when compared with the ordinary single-mode fibers. In this work, both the birefringence and dispersion properties of a polarization-maintaining chalcogenide (ChG) photonic crystal fiber are numerically investigated by means of the finite element method. Through simulation, it is found that the birefringence of the proposed $${\mathrm{G}\mathrm{e}}_{11.5}{\mathrm{A}\mathrm{s}}_{24}{\mathrm{S}\mathrm{e}}_{64.5}$$ PCF can reach as high as $$0.03$$ when compared with the conventional fiber that has merely $$5\times {10}^{-4}$$ for wavelengths in the 2–10 $$\upmu \mathrm{m}$$ range. The PCF is designed with zero-dispersion wavelengths for x- and y-polarized modes in the 2–10 $$\upmu \mathrm{m}$$ range. It is also observed that over the entire MIR wavelength range, the GVD remains positive and has a maximum value of 30,000 ps2/nm-km. Hence, the proposed $${\mathrm{G}\mathrm{e}}_{11.5}{\mathrm{A}\mathrm{s}}_{24}{\mathrm{S}\mathrm{e}}_{64.5}$$ PCF plays the dual role of acting as a very good polarization-maintaining fiber due to its very high birefringence and an excellent dispersion-compensating fiber due to its large positive GVD. This $${\mathrm{G}\mathrm{e}}_{11.5}{\mathrm{A}\mathrm{s}}_{24}{\mathrm{S}\mathrm{e}}_{64.5}$$ PCF serves as a very good candidate for ultra-broadband high bit-rate transmission. Supercontinuum generation is another important application of PCF. Supercontinuum generation is a generation of coherent and broadband light. SC generation in PCFs has several applications in optical coherence tomography (OCT), optical frequency metrology (OFM), pulse compression, and design of ultrafast femtosecond laser pulses.

9 citations

References
More filters
Journal ArticleDOI
TL;DR: In this paper, the use of dispersion-engineered microstrucured fibers made with chalcogenide glasses allows one to generate ultrabroadband supercontinuum spectra in the mid-infrared region by launching optical pulses at a suitable wavelength.
Abstract: We demonstrate numerically that the use of dispersion-engineered microstrucured fibers made with chalcogenide glasses allows one to generate ultrabroadband supercontinuum spectra in the mid-infrared region by launching optical pulses at a suitable wavelength. As a specific example, numerical simulations show that such a 1 cm long fiber, made with Ge11.5As24Se64.5 glass and pumped at a wavelength of 3.1 μm using short pulses with a relatively modest peak power of 3 kW, can produce a spectrum extending from 1.3 μm to beyond 11 μm (more than 3 octaves). We consider three fiber structures with microstrucured air holes in their cladding and find their optimum designs through dispersion engineering. Among these, equiangular spiral microstrucured fiber is found to be the most promising candidate for generating an ultrawide supercontinuum in the mid-infrared region.

26 citations

Journal ArticleDOI
TL;DR: The validity of the V parameter to identify the single-mode operation regime for photonic quasi-crystal fibers is investigated and can be generalized to any kind of optical fiber.
Abstract: We have investigated the validity of the V parameter to identify the single-mode operation regime for photonic quasi-crystal fibers. Our results show that the V parameter can be considered only for smoothly changing fibers. On the other hand, for fibers showing isolated high refractive regions around the core, only a mode area analysis can allow the estimation of the threshold for the single-mode operation regime. Finally, these findings can be generalized to any kind of optical fiber.

25 citations

Journal ArticleDOI
TL;DR: A theoretical and experimental study is presented on polarized pulsed propagation from a highly birefringent nonlinear photonic crystal fiber with two-zero dispersion wavelengths, where the most extensive spectra are obtained for a coupling polarization angles aligned with the fast and slow axis.
Abstract: A theoretical and experimental study is presented on polarized pulsed propagation from a highly birefringent nonlinear photonic crystal fiber with two-zero dispersion wavelengths. Experimental observations show that the input polarization state can maintain its linearity and that the fiber birefringence creates different spectral properties dependent on the input polarization orientation. The most extensive spectra are obtained for a coupling polarization angles aligned with the fast and slow axis, which is created by the high-order dispersion and Kerr nonlinearity.

22 citations

Journal ArticleDOI
TL;DR: An all-solid large mode-area (LMA) chalcogenide-based microstructured core optical fiber (MCOF) was designed and proposed for high power handling in the mid-IR spectral regime, covering the entire second transparency window of the atmosphere (3-5μm).

18 citations

Journal ArticleDOI
TL;DR: In this paper, the authors designed an ytterbium-doped large pitch photonic quasi-crystal fiber (PQF) for amplifying high-energy ultrashort laser pulses.
Abstract: We design an ytterbium-doped large pitch photonic quasi-crystal fiber (PQF) for amplifying high-energy ultrashort laser pulses. The proposed fiber exhibits unique properties such as very large mode area (4660 μm2), less attenuation (0.42 dB/km), high overlapping factor (0.55 for the fundamental mode), and low bending loss. These properties help amplify with high-average power ultrashort pulses with less distortion and high efficiency. To meet these requirements, we design a fiber with optimum gain filtering as well as loss filtering. From the numerical simulation of the analytical model, we confirm that the large pitch PQF plays an indispensable role in amplifying high-energy ultrashort pulses.

16 citations