Wireless Networks With RF Energy Harvesting: A Contemporary Survey
TL;DR: This paper presents an overview of the RF-EHNs including system architecture, RF energy harvesting techniques, and existing applications, and explores various key design issues according to the network types, i.e., single-hop networks, multiantenna networks, relay networks, and cognitive radio networks.
Abstract: Radio frequency (RF) energy transfer and harvesting techniques have recently become alternative methods to power the next-generation wireless networks As this emerging technology enables proactive energy replenishment of wireless devices, it is advantageous in supporting applications with quality-of-service requirements In this paper, we present a comprehensive literature review on the research progresses in wireless networks with RF energy harvesting capability, which is referred to as RF energy harvesting networks (RF-EHNs) First, we present an overview of the RF-EHNs including system architecture, RF energy harvesting techniques, and existing applications Then, we present the background in circuit design as well as the state-of-the-art circuitry implementations and review the communication protocols specially designed for RF-EHNs We also explore various key design issues in the development of RF-EHNs according to the network types, ie, single-hop networks, multiantenna networks, relay networks, and cognitive radio networks Finally, we envision some open research directions
Citations
More filters
TL;DR: Numerical results unveil a substantial performance gain that can be achieved if the resource allocation design is based on the proposed non-linear energy harvesting model instead of the traditional linear model.
Abstract: In this letter, we propose a practical non-linear energy harvesting model and design a resource allocation algorithm for simultaneous wireless information and power transfer (SWIPT) systems. The algorithm design is formulated as a non-convex optimization problem for the maximization of the total harvested power at energy harvesting receivers subject to minimum required signal-to-interference-plus-noise ratios (SINRs) at multiple information receivers. We transform the considered non-convex objective function from sum-of-ratios form into an equivalent objective function in subtractive form, which enables the derivation of an efficient iterative resource allocation algorithm. In each iteration, a rank-constrained semidefinite program (SDP) is solved optimally by SDP relaxation. Numerical results unveil a substantial performance gain that can be achieved if the resource allocation design is based on the proposed non-linear energy harvesting model instead of the traditional linear model.
863 citations
TL;DR: This paper provides a survey-style introduction to dense small cell networks and considers many research directions, namely, user association, interference management, energy efficiency, spectrum sharing, resource management, scheduling, backhauling, propagation modeling, and the economics of UDN deployment.
Abstract: The exponential growth and availability of data in all forms is the main booster to the continuing evolution in the communications industry. The popularization of traffic-intensive applications including high definition video, 3-D visualization, augmented reality, wearable devices, and cloud computing defines a new era of mobile communications. The immense amount of traffic generated by today’s customers requires a paradigm shift in all aspects of mobile networks. Ultradense network (UDN) is one of the leading ideas in this racetrack. In UDNs, the access nodes and/or the number of communication links per unit area are densified. In this paper, we provide a survey-style introduction to dense small cell networks. Moreover, we summarize and compare some of the recent achievements and research findings. We discuss the modeling techniques and the performance metrics widely used to model problems in UDN. Also, we present the enabling technologies for network densification in order to understand the state-of-the-art. We consider many research directions in this survey, namely, user association, interference management, energy efficiency, spectrum sharing, resource management, scheduling, backhauling, propagation modeling, and the economics of UDN deployment. Finally, we discuss the challenges and open problems to the researchers in the field or newcomers who aim to conduct research in this interesting and active area of research.
828 citations
Cites background from "Wireless Networks With RF Energy Ha..."
...ent scopes, specifically Heterogeneous Networks (HetNets), massive multiple-input multiple-output (massive-MIMO) networks, millimeter waves (mmWaves) networks, and energy harvesting networks [9]....
[...]
01 Jan 1997
TL;DR: In this paper, a nonlinear fractional programming problem is considered, where the objective function has a finite optimal value and it is assumed that g(x) + β + 0 for all x ∈ S,S is non-empty.
Abstract: In this chapter we deal with the following nonlinear fractional programming problem:
$$P:\mathop{{\max }}\limits_{{x \in s}} q(x) = (f(x) + \alpha )/((x) + \beta )$$
where f, g: R n → R, α, β ∈ R, S ⊆ R n . To simplify things, and without restricting the generality of the problem, it is usually assumed that, g(x) + β + 0 for all x ∈ S,S is non-empty and that the objective function has a finite optimal value.
797 citations
TL;DR: In this paper, the authors present a comprehensive overview of wireless charging techniques, the developments in technical standards, and their recent advances in network applications, with regard to network applications and discuss open issues and challenges in implementing wireless charging technologies.
Abstract: Wireless charging is a technology of transmitting power through an air gap to electrical devices for the purpose of energy replenishment. The recent progress in wireless charging techniques and development of commercial products have provided a promising alternative way to address the energy bottleneck of conventionally portable battery-powered devices. However, the incorporation of wireless charging into the existing wireless communication systems also brings along a series of challenging issues with regard to implementation, scheduling, and power management. In this paper, we present a comprehensive overview of wireless charging techniques, the developments in technical standards, and their recent advances in network applications. In particular, with regard to network applications, we review the static charger scheduling strategies, mobile charger dispatch strategies and wireless charger deployment strategies. Additionally, we discuss open issues and challenges in implementing wireless charging technologies. Finally, we envision some practical future network applications of wireless charging.
718 citations
TL;DR: This survey provides an overview of energy-efficient wireless communications, reviews seminal and recent contribution to the state-of-the-art, including the papers published in this special issue, and discusses the most relevant research challenges to be addressed in the future.
Abstract: After about a decade of intense research, spurred by both economic and operational considerations, and by environmental concerns, energy efficiency has now become a key pillar in the design of communication networks. With the advent of the fifth generation of wireless networks, with millions more base stations and billions of connected devices, the need for energy-efficient system design and operation will be even more compelling. This survey provides an overview of energy-efficient wireless communications, reviews seminal and recent contribution to the state-of-the-art, including the papers published in this special issue, and discusses the most relevant research challenges to be addressed in the future.
653 citations
Cites background from "Wireless Networks With RF Energy Ha..."
...The paper [145], as an instance, presents an analysis of the spectral efficiency of single-carrier and OFDM transmission in massive MIMO systems that use one-bit analog-to-digital converters (ADCs), while a capacity analysis of one-bit quantized MIMO systems with transmitter CSI is reported in…...
[...]
References
More filters
TL;DR: This paper studies a multiple-input multiple-output (MIMO) wireless broadcast system consisting of three nodes, where one receiver harvests energy and another receiver decodes information separately from the signals sent by a common transmitter, and all the transmitter and receivers may be equipped with multiple antennas.
Abstract: Wireless power transfer (WPT) is a promising new solution to provide convenient and perpetual energy supplies to wireless networks. In practice, WPT is implementable by various technologies such as inductive coupling, magnetic resonate coupling, and electromagnetic (EM) radiation, for short-/mid-/long-range applications, respectively. In this paper, we consider the EM or radio signal enabled WPT in particular. Since radio signals can carry energy as well as information at the same time, a unified study on simultaneous wireless information and power transfer (SWIPT) is pursued. Specifically, this paper studies a multiple-input multiple-output (MIMO) wireless broadcast system consisting of three nodes, where one receiver harvests energy and another receiver decodes information separately from the signals sent by a common transmitter, and all the transmitter and receivers may be equipped with multiple antennas. Two scenarios are examined, in which the information receiver and energy receiver are separated and see different MIMO channels from the transmitter, or co-located and see the identical MIMO channel from the transmitter. For the case of separated receivers, we derive the optimal transmission strategy to achieve different tradeoffs for maximal information rate versus energy transfer, which are characterized by the boundary of a so-called rate-energy (R-E) region. For the case of co-located receivers, we show an outer bound for the achievable R-E region due to the potential limitation that practical energy harvesting receivers are not yet able to decode information directly. Under this constraint, we investigate two practical designs for the co-located receiver case, namely time switching and power splitting, and characterize their achievable R-E regions in comparison to the outer bound.
2,595 citations
TL;DR: In this paper, an algorithm for fractional programming with nonlinear as well as linear terms in the numerator and denominator is presented. But the algorithm is based on a theorem by Jagannathan Jagannathy, R. 1966.
Abstract: The main purpose of this paper is to delineate an algorithm for fractional programming with nonlinear as well as linear terms in the numerator and denominator. The algorithm presented is based on a theorem by Jagannathan Jagannathan, R. 1966. On some properties of programming problems in parametric form pertaining to fractional programming. Management Sci.12 609--615. concerning the relationship between fractional and parametric programming. This theorem is restated and proved in a somewhat simpler way. Finally, it is shown how the given algorithm can be related to the method of Isbell and Marlow Isbell, J. R., W. H. Marlow. 1956. Attrition games. Naval Res. Logist. Quart.3 71--93. for linear fractional programming and to the quadratic parametric approach by Ritter Ritter, K. 1962. Ein Verfahren zur Losung parameterabhangiger, nichtlinearer Maximum-Probleme. Unternehmensforschung, Band 6, S. 149--166.. The Appendix contains a numerical example.
2,531 citations
06 Jul 2008
TL;DR: The fundamental tradeoff between the rates at which energy and reliable information can be transmitted over a single noisy line is studied.
Abstract: The fundamental tradeoff between the rates at which energy and reliable information can be transmitted over a single noisy line is studied. Engineering inspiration for this problem is provided by powerline communication, RFID systems, and covert packet timing systems as well as communication systems that scavenge received energy. A capacity-energy function is defined and a coding theorem is given. The capacity-energy function is a non-increasing concave cap function. Capacity-energy functions for several channels are computed.
1,792 citations
"Wireless Networks With RF Energy Ha..." refers background in this paper
...Existing works that consider ideal receiver architecture, such as [18], [21], [134], [135], generally analyze the theoretical upper bound of receiver performance....
[...]
TL;DR: The numerical analysis provides practical insights into the effect of various system parameters, such as energy harvesting time, power splitting ratio, source transmission rate, source to relay distance, noise power, and energy harvesting efficiency, on the performance of wireless energy harvesting and information processing using AF relay nodes.
Abstract: An emerging solution for prolonging the lifetime of energy constrained relay nodes in wireless networks is to avail the ambient radio-frequency (RF) signal and to simultaneously harvest energy and process information. In this paper, an amplify-and-forward (AF) relaying network is considered, where an energy constrained relay node harvests energy from the received RF signal and uses that harvested energy to forward the source information to the destination. Based on the time switching and power splitting receiver architectures, two relaying protocols, namely, i) time switching-based relaying (TSR) protocol and ii) power splitting-based relaying (PSR) protocol are proposed to enable energy harvesting and information processing at the relay. In order to determine the throughput, analytical expressions for the outage probability and the ergodic capacity are derived for delay-limited and delay-tolerant transmission modes, respectively. The numerical analysis provides practical insights into the effect of various system parameters, such as energy harvesting time, power splitting ratio, source transmission rate, source to relay distance, noise power, and energy harvesting efficiency, on the performance of wireless energy harvesting and information processing using AF relay nodes. In particular, the TSR protocol outperforms the PSR protocol in terms of throughput at relatively low signal-to-noise-ratios and high transmission rates.
1,644 citations
"Wireless Networks With RF Energy Ha..." refers methods in this paper
...Apart from the aforementioned works [202], [204], [205]...
[...]
...In [204], two relaying protocols for an RF energy harvesting relay node are proposed based on the time-switching and powersplitting receiver architectures, respectively, both of which require perfect CSI at the destination node....
[...]
TL;DR: A general receiver operation, namely, dynamic power splitting (DPS), which splits the received signal with adjustable power ratio for energy harvesting and information decoding, separately is proposed and the optimal transmission strategy is derived to achieve different rate-energy tradeoffs.
Abstract: Simultaneous information and power transfer over the wireless channels potentially offers great convenience to mobile users. Yet practical receiver designs impose technical constraints on its hardware realization, as practical circuits for harvesting energy from radio signals are not yet able to decode the carried information directly. To make theoretical progress, we propose a general receiver operation, namely, dynamic power splitting (DPS), which splits the received signal with adjustable power ratio for energy harvesting and information decoding, separately. Three special cases of DPS, namely, time switching (TS), static power splitting (SPS) and on-off power splitting (OPS) are investigated. The TS and SPS schemes can be treated as special cases of OPS. Moreover, we propose two types of practical receiver architectures, namely, separated versus integrated information and energy receivers. The integrated receiver integrates the front-end components of the separated receiver, thus achieving a smaller form factor. The rate-energy tradeoff for the two architectures are characterized by a so-called rate-energy (R-E) region. The optimal transmission strategy is derived to achieve different rate-energy tradeoffs. With receiver circuit power consumption taken into account, it is shown that the OPS scheme is optimal for both receivers. For the ideal case when the receiver circuit does not consume power, the SPS scheme is optimal for both receivers. In addition, we study the performance for the two types of receivers under a realistic system setup that employs practical modulation. Our results provide useful insights to the optimal practical receiver design for simultaneous wireless information and power transfer (SWIPT).
1,610 citations