Wireless Networks With RF Energy Harvesting: A Contemporary Survey
TL;DR: This paper presents an overview of the RF-EHNs including system architecture, RF energy harvesting techniques, and existing applications, and explores various key design issues according to the network types, i.e., single-hop networks, multiantenna networks, relay networks, and cognitive radio networks.
Abstract: Radio frequency (RF) energy transfer and harvesting techniques have recently become alternative methods to power the next-generation wireless networks As this emerging technology enables proactive energy replenishment of wireless devices, it is advantageous in supporting applications with quality-of-service requirements In this paper, we present a comprehensive literature review on the research progresses in wireless networks with RF energy harvesting capability, which is referred to as RF energy harvesting networks (RF-EHNs) First, we present an overview of the RF-EHNs including system architecture, RF energy harvesting techniques, and existing applications Then, we present the background in circuit design as well as the state-of-the-art circuitry implementations and review the communication protocols specially designed for RF-EHNs We also explore various key design issues in the development of RF-EHNs according to the network types, ie, single-hop networks, multiantenna networks, relay networks, and cognitive radio networks Finally, we envision some open research directions
Citations
More filters
TL;DR: Numerical results unveil a substantial performance gain that can be achieved if the resource allocation design is based on the proposed non-linear energy harvesting model instead of the traditional linear model.
Abstract: In this letter, we propose a practical non-linear energy harvesting model and design a resource allocation algorithm for simultaneous wireless information and power transfer (SWIPT) systems. The algorithm design is formulated as a non-convex optimization problem for the maximization of the total harvested power at energy harvesting receivers subject to minimum required signal-to-interference-plus-noise ratios (SINRs) at multiple information receivers. We transform the considered non-convex objective function from sum-of-ratios form into an equivalent objective function in subtractive form, which enables the derivation of an efficient iterative resource allocation algorithm. In each iteration, a rank-constrained semidefinite program (SDP) is solved optimally by SDP relaxation. Numerical results unveil a substantial performance gain that can be achieved if the resource allocation design is based on the proposed non-linear energy harvesting model instead of the traditional linear model.
863 citations
TL;DR: This paper provides a survey-style introduction to dense small cell networks and considers many research directions, namely, user association, interference management, energy efficiency, spectrum sharing, resource management, scheduling, backhauling, propagation modeling, and the economics of UDN deployment.
Abstract: The exponential growth and availability of data in all forms is the main booster to the continuing evolution in the communications industry. The popularization of traffic-intensive applications including high definition video, 3-D visualization, augmented reality, wearable devices, and cloud computing defines a new era of mobile communications. The immense amount of traffic generated by today’s customers requires a paradigm shift in all aspects of mobile networks. Ultradense network (UDN) is one of the leading ideas in this racetrack. In UDNs, the access nodes and/or the number of communication links per unit area are densified. In this paper, we provide a survey-style introduction to dense small cell networks. Moreover, we summarize and compare some of the recent achievements and research findings. We discuss the modeling techniques and the performance metrics widely used to model problems in UDN. Also, we present the enabling technologies for network densification in order to understand the state-of-the-art. We consider many research directions in this survey, namely, user association, interference management, energy efficiency, spectrum sharing, resource management, scheduling, backhauling, propagation modeling, and the economics of UDN deployment. Finally, we discuss the challenges and open problems to the researchers in the field or newcomers who aim to conduct research in this interesting and active area of research.
828 citations
Cites background from "Wireless Networks With RF Energy Ha..."
...ent scopes, specifically Heterogeneous Networks (HetNets), massive multiple-input multiple-output (massive-MIMO) networks, millimeter waves (mmWaves) networks, and energy harvesting networks [9]....
[...]
01 Jan 1997
TL;DR: In this paper, a nonlinear fractional programming problem is considered, where the objective function has a finite optimal value and it is assumed that g(x) + β + 0 for all x ∈ S,S is non-empty.
Abstract: In this chapter we deal with the following nonlinear fractional programming problem:
$$P:\mathop{{\max }}\limits_{{x \in s}} q(x) = (f(x) + \alpha )/((x) + \beta )$$
where f, g: R n → R, α, β ∈ R, S ⊆ R n . To simplify things, and without restricting the generality of the problem, it is usually assumed that, g(x) + β + 0 for all x ∈ S,S is non-empty and that the objective function has a finite optimal value.
797 citations
TL;DR: In this paper, the authors present a comprehensive overview of wireless charging techniques, the developments in technical standards, and their recent advances in network applications, with regard to network applications and discuss open issues and challenges in implementing wireless charging technologies.
Abstract: Wireless charging is a technology of transmitting power through an air gap to electrical devices for the purpose of energy replenishment. The recent progress in wireless charging techniques and development of commercial products have provided a promising alternative way to address the energy bottleneck of conventionally portable battery-powered devices. However, the incorporation of wireless charging into the existing wireless communication systems also brings along a series of challenging issues with regard to implementation, scheduling, and power management. In this paper, we present a comprehensive overview of wireless charging techniques, the developments in technical standards, and their recent advances in network applications. In particular, with regard to network applications, we review the static charger scheduling strategies, mobile charger dispatch strategies and wireless charger deployment strategies. Additionally, we discuss open issues and challenges in implementing wireless charging technologies. Finally, we envision some practical future network applications of wireless charging.
718 citations
TL;DR: This survey provides an overview of energy-efficient wireless communications, reviews seminal and recent contribution to the state-of-the-art, including the papers published in this special issue, and discusses the most relevant research challenges to be addressed in the future.
Abstract: After about a decade of intense research, spurred by both economic and operational considerations, and by environmental concerns, energy efficiency has now become a key pillar in the design of communication networks. With the advent of the fifth generation of wireless networks, with millions more base stations and billions of connected devices, the need for energy-efficient system design and operation will be even more compelling. This survey provides an overview of energy-efficient wireless communications, reviews seminal and recent contribution to the state-of-the-art, including the papers published in this special issue, and discusses the most relevant research challenges to be addressed in the future.
653 citations
Cites background from "Wireless Networks With RF Energy Ha..."
...The paper [145], as an instance, presents an analysis of the spectral efficiency of single-carrier and OFDM transmission in massive MIMO systems that use one-bit analog-to-digital converters (ADCs), while a capacity analysis of one-bit quantized MIMO systems with transmitter CSI is reported in…...
[...]
References
More filters
Posted Content•
TL;DR: In this article, the authors studied the sum-throughput maximization of all users by jointly optimizing the time allocation for the DL wireless power transfer versus the users' UL information transmissions given a total time constraint.
Abstract: This paper studies the newly emerging wireless powered communication network (WPCN) in which one hybrid access point (H-AP) with constant power supply coordinates the wireless energy/information transmissions to/from distributed users that do not have energy sources. A "harvest-then-transmit" protocol is proposed where all users first harvest the wireless energy broadcast by the H-AP in the downlink (DL) and then send their independent information to the H-AP in the uplink (UL) by time-division-multiple-access (TDMA). First, we study the sum-throughput maximization of all users by jointly optimizing the time allocation for the DL wireless power transfer versus the users' UL information transmissions given a total time constraint based on the users' DL and UL channels as well as their average harvested energy values. By applying convex optimization techniques, we obtain the closed-form expressions for the optimal time allocations to maximize the sum-throughput. Our solution reveals "doubly near-far" phenomenon due to both the DL and UL distance-dependent signal attenuation, where a far user from the H-AP, which receives less wireless energy than a nearer user in the DL, has to transmit with more power in the UL for reliable information transmission. Consequently, the maximum sum-throughput is achieved by allocating substantially more time to the near users than the far users, thus resulting in unfair rate allocation among different users. To overcome this problem, we furthermore propose a new performance metric so-called common-throughput with the additional constraint that all users should be allocated with an equal rate regardless of their distances to the H-AP. We present an efficient algorithm to solve the common-throughput maximization problem. Simulation results demonstrate the effectiveness of the common-throughput approach for solving the new doubly near-far problem in WPCNs.
1,055 citations
TL;DR: An impulse-response characterization for the propagation path is presented, including models for small-scale fading, and it is shown that when two-way communication ports can be defined for a mobile system, it is possible to use reciprocity to focus the energy along the direction of an intended user without any explicit knowledge of the electromagnetic environment in which the system is operating.
Abstract: In order to estimate the signal parameters accurately for mobile systems, it is necessary to estimate a system's propagation characteristics through a medium. Propagation analysis provides a good initial estimate of the signal characteristics. The ability to accurately predict radio-propagation behavior for wireless personal communication systems, such as cellular mobile radio, is becoming crucial to system design. Since site measurements are costly, propagation models have been developed as a suitable, low-cost, and convenient alternative. Channel modeling is required to predict path, loss and to characterize the impulse response of the propagating channel. The path loss is associated with the design of base stations, as this tells us how much a transmitter needs to radiate to service a given region. Channel characterization, on the other hand, deals with the fidelity of the received signals, and has to do with the nature of the waveform received at a receiver. The objective here is to design a suitable receiver that will receive the transmitted signal, distorted due to the multipath and dispersion effects of the channel, and that will decode the transmitted signal. An understanding of the various propagation models can actually address both problems. This paper begins with a review of the information available on the various propagation models for both indoor and outdoor environments. The existing models can be classified into two major classes: statistical models and site-specific models. The main characteristics of the radio channel - such as path loss, fading, and time-delay spread - are discussed. Currently, a third alternative, which includes many new numerical methods, is being introduced to propagation prediction. The advantages and disadvantages of some of these methods are summarized. In addition, an impulse-response characterization for the propagation path is also presented, including models for small-scale fading, Finally, it is shown that when two-way communication ports can be defined for a mobile system, it is possible to use reciprocity to focus the energy along the direction of an intended user without any explicit knowledge of the electromagnetic environment in which the system is operating, or knowledge of the spatial locations of the transmitter and the receiver.
898 citations
01 Jan 1997
TL;DR: In this paper, a nonlinear fractional programming problem is considered, where the objective function has a finite optimal value and it is assumed that g(x) + β + 0 for all x ∈ S,S is non-empty.
Abstract: In this chapter we deal with the following nonlinear fractional programming problem:
$$P:\mathop{{\max }}\limits_{{x \in s}} q(x) = (f(x) + \alpha )/((x) + \beta )$$
where f, g: R n → R, α, β ∈ R, S ⊆ R n . To simplify things, and without restricting the generality of the problem, it is usually assumed that, g(x) + β + 0 for all x ∈ S,S is non-empty and that the objective function has a finite optimal value.
797 citations
"Wireless Networks With RF Energy Ha..." refers methods in this paper
...Then, the resource allocation scheme based on a Dinkelbach method [193] is proposed to jointly optimize the transmit power and time duration of RF energy transfer....
[...]
TL;DR: In this article, a city-wide RF spectral survey was undertaken from outside all of the 270 London Underground stations at street level, and four harvesters (comprising antenna, impedance-matching network, rectifier, maximum power point tracking interface, and storage element) were designed to cover four frequency bands from the largest RF contributors within the ultrahigh frequency (0.3-3 GHz) part of the frequency spectrum.
Abstract: RF harvesting circuits have been demonstrated for more than 50 years, but only a few have been able to harvest energy from freely available ambient (i.e., non-dedicated) RF sources. In this paper, our objectives were to realize harvester operation at typical ambient RF power levels found within urban and semi-urban environments. To explore the potential for ambient RF energy harvesting, a city-wide RF spectral survey was undertaken from outside all of the 270 London Underground stations at street level. Using the results from this survey, four harvesters (comprising antenna, impedance-matching network, rectifier, maximum power point tracking interface, and storage element) were designed to cover four frequency bands from the largest RF contributors (DTV, GSM900, GSM1800, and 3G) within the ultrahigh frequency (0.3-3 GHz) part of the frequency spectrum. Prototypes were designed and fabricated for each band. The overall end-to-end efficiency of the prototypes using realistic input RF power sources is measured; with our first GSM900 prototype giving an efficiency of 40%. Approximately half of the London Underground stations were found to be suitable locations for harvesting ambient RF energy using our four prototypes. Furthermore, multiband array architectures were designed and fabricated to provide a broader freedom of operation. Finally, an output dc power density comparison was made between all the ambient RF energy harvesters, as well as alternative energy harvesting technologies, and for the first time, it is shown that ambient RF harvesting can be competitive with the other technologies.
778 citations
"Wireless Networks With RF Energy Ha..." refers methods in this paper
...Existing literature has also presented many implementations of batt eryfree devices powered by ambient energy from WiFi [ 67], [68], GSM [69], [70], [71], [72] and DTV bands [ 73], [74], [75], [76], [77], [78] as well as ambient mobile electronic devices [79]....
[...]
TL;DR: An RF-DC power conversion system is designed to efficiently convert far-field RF energy to DC voltages at very low received power and voltages and is ideal for use in passively powered sensor networks.
Abstract: An RF-DC power conversion system is designed to efficiently convert far-field RF energy to DC voltages at very low received power and voltages. Passive rectifier circuits are designed in a 0.25 mum CMOS technology using floating gate transistors as rectifying diodes. The 36-stage rectifier can rectify input voltages as low as 50 mV with a voltage gain of 6.4 and operates with received power as low as 5.5 muW(22.6 dBm). Optimized for far field, the circuit operates at a distance of 44 m from a 4 W EIRP source. The high voltage range achieved at low load current make it ideal for use in passively powered sensor networks.
766 citations
"Wireless Networks With RF Energy Ha..." refers background in this paper
...However, as shown in [34], to realize 5....
[...]