Z-source inverter
10 Dec 2002-Vol. 39, Iss: 2, pp 504-510
TL;DR: The Z-source converter employs a unique impedance network to couple the converter main circuit to the power source, thus providing unique features that cannot be obtained in the traditional voltage-source (or voltage-fed) and current-source converters where a capacitor and inductor are used, respectively.
Abstract: This paper presents an impedance-source (or impedance-fed) power converter (abbreviated as Z-source converter) and its control method for implementing DC-to-AC, AC-to-DC, AC-to-AC, and DC-to-DC power conversion. The Z-source converter employs a unique impedance network (or circuit) to couple the converter main circuit to the power source, thus providing unique features that cannot be obtained in the traditional voltage-source (or voltage-fed) and current-source (or current-fed) converters where a capacitor and inductor are used, respectively. The Z-source converter overcomes the conceptual and theoretical barriers and limitations of the traditional voltage-source converter (abbreviated as V-source converter) and current-source converter (abbreviated as I-source converter) and provides a novel power conversion concept. The Z-source concept can be applied to all DC-to-AC, AC-to-DC, AC-to-AC, and DC-to-DC power conversion. To describe the operating principle and control, this paper focuses on an example: a Z-source inverter for DC-AC power conversion needed in fuel cell applications. Simulation and experimental results are presented to demonstrate the new features.
Citations
More filters
TL;DR: In this article, power electronics, the technology of efficiently processing electric power, play an essential part in the integration of the dispersed generation units for good efficiency and high performance of the power systems.
Abstract: The global electrical energy consumption is rising and there is a steady increase of the demand on the power capacity, efficient production, distribution and utilization of energy. The traditional power systems are changing globally, a large number of dispersed generation (DG) units, including both renewable and nonrenewable energy sources such as wind turbines, photovoltaic (PV) generators, fuel cells, small hydro, wave generators, and gas/steam powered combined heat and power stations, are being integrated into power systems at the distribution level. Power electronics, the technology of efficiently processing electric power, play an essential part in the integration of the dispersed generation units for good efficiency and high performance of the power systems. This paper reviews the applications of power electronics in the integration of DG units, in particular, wind power, fuel cells and PV generators.
2,296 citations
15 Jun 2008
TL;DR: In this paper, theoretical results are shown for several novel inverters, which are similar to the Z-source inverters presented in previous works, but have several advantages, including in some combination; lower component ratings, reduced source stress, reduced component count and simplified control strategies.
Abstract: In this paper, theoretical results are shown for several novel inverters. These inverters are similar to the Z-source inverters presented in previous works, but have several advantages, including in some combination; lower component ratings, reduced source stress, reduced component count and simplified control strategies. Like the Z-source inverter, these inverters are particularly suited for applications which require a large range of gain, such as in motor controllers or renewable energy. Simulation and experimental results are shown for one topology to verify the analysis. Also, a back-to-back inverter system featuring bidirectionality on both inverters, as well as secondary energy storage with only a single additional switch, is shown.
1,031 citations
Cites methods or result from "Z-source inverter"
...These methods have been explored in detail in [1-5] and others, so the methods will not be explained here....
[...]
...These results also show that the inverter has similar behavior to the ZSI presented in [1-6]....
[...]
01 Jan 2015
TL;DR: An overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems is presented in this paper.
Abstract: Photovoltaic (PV) energy has grown at an average annual rate of 60% in the last five years, surpassing one third of the cumulative wind energy installed capacity, and is quickly becoming an important part of the energy mix in some regions and power systems. This has been driven by a reduction in the cost of PV modules. This growth has also triggered the evolution of classic PV power converters from conventional singlephase grid-tied inverters to more complex topologies to increase efficiency, power extraction from the modules, and reliability without impacting the cost. This article presents an overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems. In addition, the recent research and emerging PV converter technology are discussed, highlighting their possible advantages compared with the present technology. Solar PV energy conversion systems have had a huge growth from an accumulative total power equal to approximately 1.2 GW in 1992 to 136 GW in 2013 (36 GW during 2013) [1]. This phenomenon has been possible because of several factors all working together to push the PV energy to cope with one important position today (and potentially a fundamental position in the near future). Among these factors are the cost reduction and increase in efficiency of the PV modules, the search for alternative clean energy sources (not based on fossil fuels), increased environmental awareness, and favorable political regulations from local governments (establishing feed-in tariffs designed to accelerate investment in renewable energy technologies). It has become usual to see PV systems installed on the roofs of houses or PV farms next to the roads in the countryside. Grid-connected PV systems account for more than 99% of the PV installed capacity compared to
772 citations
TL;DR: An overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems is presented in this article.
Abstract: Photovoltaic (PV) energy has grown at an average annual rate of 60% in the last five years, surpassing one third of the cumulative wind energy installed capacity, and is quickly becoming an important part of the energy mix in some regions and power systems. This has been driven by a reduction in the cost of PV modules. This growth has also triggered the evolution of classic PV power converters from conventional single-phase grid-tied inverters to more complex topologies to increase efficiency, power extraction from the modules, and reliability without impacting the cost. This article presents an overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems. In addition, the recent research and emerging PV converter technology are discussed, highlighting their possible advantages compared with the present technology.
772 citations
TL;DR: In this article, a maximum boost control method for the Z-source inverter is presented to produce the maximum voltage boost under a given modulation index, and the relationship of voltage gain versus modulation index and voltage stress versus voltage gain is analyzed in detail and verified by simulation and experiment.
Abstract: This paper explores control methods for the Z-source inverter and their relationships of voltage boost versus modulation index. A maximum boost control is presented to produce the maximum voltage boost (or voltage gain) under a given modulation index. The control method, relationships of voltage gain versus modulation index, and voltage stress versus voltage gain are analyzed in detail and verified by simulation and experiment.
769 citations
Cites background or methods from "Z-source inverter"
...In [1], the main circuit of the Z-source inverter and the operation principle have been described in detail....
[...]
...As described in [1], the voltage gain of the Z-source inverter can be expressed as...
[...]
...In [1], a simple boost control method was used to control the shoot-through duty ratio....
[...]
...The recently presented Z source inverter [1]–[3] shown in Fig....
[...]
...As analyzed in [1], the voltage stress V across the switches is BV The voltage stress under this modulation method can be calculated by...
[...]
References
More filters
Book•
26 Jul 1989
TL;DR: In this paper, the authors present a simulation of power switch-mode converters for zero-voltage and/or zero-current switchings in power electronic converters and systems.
Abstract: Partial table of contents: Overview of Power Semiconductor Switches Computer Simulation of Power Electronic Converters and Systems GENERIC POWER ELECTRONIC CIRCUITS dc--dc Switch-Mode Converters Resonant Converters: Zero-Voltage and/or Zero-Current Switchings POWER SUPPLY APPLICATIONS Power Conditioners and Uninterruptible Power Supplies MOTOR DRIVE APPLICATIONS dc Motor Drives Induction Motor Drives Synchronous Motor Drives OTHER APPLICATIONS Residential and Industrial Applications Optimizing the Utility Interface with Power Electronic Systems SEMICONDUCTOR DEVICES Basic Semiconductor Physics Power Diodes Power MOSFETs Thyristors Emerging Devices and Circuits PRACTICAL CONVERTER DESIGN CONSIDERATIONS Snubber Circuits Gate and Base Drive Circuits Design of Magnetic Components Index
5,911 citations
Book•
01 Jan 2015
TL;DR: In this paper, the authors present a simulation of a six-step Thyristor Inverter with three-level Inverters and three-phase Bridge Invergers. And they present a Neural Network in Identification and Control toolbox.
Abstract: (NOTE: Each chapter begins with an Introduction and concludes with a Summary and References.) Preface. List of Principal Symbols. 1. Power Semiconductor Devices. Diodes. Thyristors. Triacs. Gate Turn-Off Thyristors (GTOs). Bipolar Power or Junction Transistors (BPTs or BJTs). Power MOSFETs. Static Induction Transistors (SITs). Insulated Gate Bipolar Transistors (IGBTs). MOS-Controlled Thyristors (MCTs). Integrated Gate-Commutated Thyristors (IGCTs). Large Band-Gap Materials for Devices. Power Integrated Circuits (PICs). 2. AC Machines for Drives. Induction Machines. Synchronous Machines. Variable Reluctance Machine (VRM). 3. Diodes and Phase-Controlled Converters. Diode Rectifiers. Thyristor Converters. Converter Control. EMI and Line Power Quality Problems. 4. Cycloconverters. Phase-Controlled Cycloconverters. Matrix Converters. High-Frequency Cycloconverters. 5. Voltage-Fed Converters. Single-Phase Inverters. Three-Phase Bridge Inverters. Multi-Stepped Inverters. Pulse Width Modulation Techniques. Three-Level Inverters. Hard Switching Effects. Resonant Inverters. Soft-Switched Inverters. Dynamic and Regenerative Drive Braking. PWM Rectifiers. Static VAR Compensators and Active Harmonic Filters. Introduction to Simulation-MATLAB/SIMULINK. 6. Current-Fed Converters. General Operation of a Six-Step Thyristor Inverter. Load-Commutated Inverters. Force-Commutated Inverters. Harmonic Heating and Torque Pulsation. Multi-Stepped Inverters. Inverters with Self-Commutated Devices. Current-Fed vs Voltage-Fed Converters. 7. Induction Motor Slip-Power Recovery Drives. Doubly-Fed Machine Speed Control by Rotor Rheostat. Static Kramer Drive. Static Scherius Drive. 8. Control and Estimation of Induction Motor Drives. Induction Motor Control with Small Signal Model. Scalar Control. Vector or Field-Oriented Control. Sensorless Vector Control. Direct Torque and Flux Control (DTC). Adaptive Control. Self-Commissioning of Drive. 9. Control and Estimation of Synchronous Motor Drives. Sinusoidal SPM Machine Drives. Synchronous Reluctance Machine Drives. Sinusoidal IPM Machine Drives. Trapezoidal SPM Machine Drives. Wound-Field Synchronous Machine Drives. Sensorless Control. Switched Reluctance Motor (SRM) Drives. 10. Expert System Principles and Applications. Expert System Principles. Expert System Shell. Design Methodology. Applications. Glossary. 11. Fuzzy Logic Principles and Applications. Fuzzy Sets. Fuzzy System. Fuzzy Control. General Design Methodology. Applications. Fuzzy Logic Toolbox. Glossary. 12. Neural Network Principles and Applications. The Structure of a Neuron. Artificial Neural Network. Other Networks. Neural Network in Identification and Control. General Design Methodology. Applications. Neuro-Fuzzy Systems. Demo Program with Neural Network Toolbox. Glossary. Index.
2,836 citations
Book•
25 Sep 1997TL;DR: The second edition of Elements of Power Electronics as mentioned in this paper provides comprehensive coverage of the subject at a level suitable for undergraduate engineering students, students in advanced degree programs, and novices in the field.
Abstract: Building on the tradition of its classic first edition, the long-awaited second edition of Elements of Power Electronics provides comprehensive coverage of the subject at a level suitable for undergraduate engineering students, students in advanced degree programs, and novices in the field. It establishes a fundamental engineering basis for power electronics analysis, design, and implementation, offering broad and in-depth coverage of basic material. Streamlined throughout to reflect new innovations in technology, the second edition also features updates on renewable and alternative energy. Elements of Power Electronics features a unifying framework that includes the physical implications of circuit laws, switching circuit analysis, and the basis for converter operation and control. It discusses dc-dc, ac-dc, dc-ac, and ac-ac conversion tasks and principles of resonant converters and discontinuous converters. The text also addresses magnetic device design, thermal management and drivers for power semiconductors, control system aspects of converters, and both small-signal and geometric controls. Models for real devices and components-including capacitors, inductors, wire connections, and power semiconductors-are developed in depth, while newly expanded examples show students how to use tools like Mathcad, Matlab, and Mathematica to aid in the analysis and design of conversion circuits. Features: *More than 160 examples and 350 chapter problems support the presented concepts*An extensive Companion Website includes additional problems, laboratory materials, selected solutions for students, computer-based examples, and analysis tools for Mathcad, Matlab, and Mathematica
508 citations
Book•
01 Jan 1998
TL;DR: In this paper, the authors present an analytical solution to calculate the current waveform of an AC-to-AC converter and demonstrate the effect of current waveforms on the performance of the converter.
Abstract: Preface. 1 Principles and Methods of Electric PowerConversion. 1.1 What Is Power Electronics? 1.2 Generic Power Converter. 1.3 Waveform Components and Figures of Merit. 1.4 Phase Control. 1.5 Pulse Width Modulation. 1.6 Calculation of Current Waveforms. 1.6.1 Analytical Solution. 1.6.2 Numerical Solution. 1.6.3 Practical Examples: Single-Phase Diode Rectifiers. 1.7 Summary. Example. Problems. Computer Assignments. Literature. 2 Semiconductor Power Switches. 2.1 General Properties of Semiconductor Power Switches. 2.2 Power Diodes. 2.3 Semicontrolled Switches. 2.3.1 SCRs. 2.3.2 Triacs. 2.4 Fully Controlled Switches. 2.4.1 GTOs. 2.4.2 IGCTs. 2.4.3 Power BJTs. 2.4.4 Power MOSFETs. 2.4.5 IGBTs. 2.5 Comparison of Semiconductor Power Switches. 2.6 Power Modules. 2.7 Summary. Literature. 3 Supplementary Components and Systems. 3.1 What Are Supplementary Components and Systems? 3.2 Drivers. 3.2.1 Drivers for SCRs, Triacs, and BCTs. 3.2.2 Drivers for GTOs and IGCTs. 3.2.3 Drivers for BJTs. 3.2.4 Drivers for Power MOSFETs and IGBTs. 3.3 Overcurrent Protection Schemes. 3.4 Snubbers. 3.4.1 Snubbers for Power Diodes, SCRs, and Triacs. 3.4.2 Snubbers for GTOs and IGCTs. 3.4.3 Snubbers for Transistors. 3.4.4 Energy Recovery from Snubbers. 3.5 Filters. 3.6 Cooling. 3.7 Control. 3.8 Summary. Literature. 4 AC-to-DC Converters. 4.1 Diode Rectifiers. 4.1.1 Three-Pulse Diode Rectifier. 4.1.2 Six-Pulse Diode Rectifier. 4.2 Phase-Controlled Rectifiers. 4.2.1 Phase-Controlled Six-Pulse Rectifier. 4.2.2 Dual Converters. 4.3 PWM Rectifiers. 4.3.1 Impact of Input Filter. 4.3.2 Principles of Pulse Width Modulation. 4.3.3 Current-Type PWM Rectifier. 4.3.4 Voltage-Type PWM Rectifier. 4.4 Device Selection for Rectifiers. 4.5 Common Applications of Rectifiers. 4.6 Summary. Examples. Problems. Computer Assignments. Literature. 5 AC-to-AC Converters. 5.1 AC Voltage Controllers. 5.1.1 Phase-Controlled Single-Phase AC Voltage Controller. 5.1.2 Phase-Controlled Three-Phase AC Voltage Controllers. 5.1.3 PWM AC Voltage Controllers. 5.2 Cycloconverters. 5.3 Matrix Converters. 5.4 Device Selection for AC-to-AC Converters. 5.5 Common Applications of AC-to-AC Converters. 5.6 Summary. Examples. Problems. Computer Assignments. Literature. 6 DC-to-DC Converters. 6.1 Static DC Switches. 6.2 Step-Down Choppers. 6.2.1 First-Quadrant Chopper. 6.2.2 Second-Quadrant Chopper. 6.2.3 First-and-Second-Quadrant Chopper. 6.2.4 First-and-Fourth-Quadrant Chopper. 6.2.5 Four-Quadrant Chopper. 6.3 Step-Up Chopper. 6.4 Current Control in Choppers. 6.5 Device Selection for Choppers. 6.6 Common Applications of Choppers. 6.7 Summary. Example. Problems. Computer Assignments. Literature. 7 DC-to-AC Converters. 7.1 Voltage-Source Inverters. 7.1.1 Single-Phase Voltage-Source Inverter. 7.1.2 Three-Phase Voltage-Source Inverter. 7.1.3 Voltage Control Techniques for Voltage-SourceInverters. 7.1.4 Current Control Techniques for Voltage-SourceInverters. 7.2 Current-Source Inverters. 7.2.1 Three-Phase Square-Wave Current-Source Inverter. 7.2.2 Three-Phase PWM Current-Source Inverter. 7.3 Multilevel Inverters. 7.4 Soft-Switching Inverters. 7.5 Device Selection for Inverters. 7.6 Common Applications of Inverters. 7.7 Summary. Examples. Problems. Computer Assignments. Literature. 8 Switching Power Supplies. 8.1 Basic Types of Switching Power Supplies. 8.2 Nonisolated Switched-Mode DC-to-DC Converters. 8.2.1 Buck Converter. 8.2.2 Boost Converter. 8.2.3 Buck Boost Converter. 8.2.4 uk Converter. 8.2.5 SEPIC and Zeta Converters. 8.2.6 Comparison of Nonisolated Switched-Mode DC-to-DCConverters. 8.3 Isolated Switched-Mode DC-to-DC Converters. 8.3.1 Single-Switch Isolated DC-to-DC Converters. 8.3.2 Multiple-Switch Isolated DC-to-DC Converters. 8.3.3 Comparison of Isolated Switched-Mode DC-to-DCConverters. 8.4 Resonant DC-to-DC Converters. 8.4.1 Quasi-Resonant Converters. 8.4.2 Load-Resonant Converters. 8.4.3 Comparison of Resonant DC-to-DC Converters. 8.5 Summary. Examples. Problems. Computer Assignments. Literature. 9 Power Electronics and Clean Energy. 9.1 Why Is Power Electronics Indispensable in Clean EnergySystems? 9.2 Solar and Wind Renewable Energy Systems. 9.2.1 Solar Energy Systems. 9.2.2 Wind Energy Systems. 9.3 Fuel Cell Energy Systems. 9.4 Electric and Hybrid Cars. 9.5 Power Electronics and Energy Conservation. 9.6 Summary. Literature. Appendix A PSpice Simulations. Appendix B Fourier Series. Appendix C Three-Phase Systems. Index.
168 citations