scispace - formally typeset
Search or ask a question

Can you steam ceramic bowls? 

Porous medium
Ceramic
Electrical discharge machining
Silicon carbide
Mullite

Answers from top 9 papers

More filters
Papers (9)Insight
Open access•Journal Article•DOI
Biomorphic ceramics from wood-derived precursors
Joaquín Ramírez-Rico, Julián Martínez-Fernández, Mrityunjay Singh 
02 Aug 2017-International Materials Reviews
31 Citations
These materials have tailorable microstructure and properties, and behave like ceramic materials manufactured by advanced ceramic processing approaches.
Journal Article•DOI
The influence of multiple firing on thermal contraction of ceramic materials used for the fabrication of layered all-ceramic dental restorations.
Giuseppe Isgrò, Cornelis J. Kleverlaan, Hang Wang, Albert J. Feilzer 
01 Jun 2005-Dental Materials
51 Citations
It can be concluded that due to the thermal stability of glass-ceramic materials, layered all-ceramic restorations of these materials may perform better.
Journal Article•DOI
Effects of Thin Mullite Coating on the Environmental Stability of Sintered Si3N4
Irina Tsarenko, Henry Du, Woo Y. Lee 
01 Mar 2004-Journal of the American Ceramic Society
13 Citations
However, the mullite coating had little effect on the stability of the ceramic in the steam environment at 1200°C, due likely to high activity of SiO2 in mullite.
Journal Article•DOI
Mechanical alloying of ceramics in zirconia-ceria system
Yuanpeng Chen, M. Qi, Dazhi Yang, K.H. Wu 
15 Jun 1994-Materials Science and Engineering A-structural Materials Properties Microstructure and Processing
20 Citations
The result proves that mechanical alloying can occur in ceramic systems.
Journal Article•DOI
Assessment of the use potential of iron ore tailings in the manufacture of ceramic tiles: From tailings-dams to “brown porcelain”
Wanna Carvalho Fontes, José Maria Franco de Carvalho, Luana C. R. Andrade, Ana M. Segadães, Ricardo André Fiorotti Peixoto 
10 May 2019-Construction and Building Materials
60 Citations
This work shows that the clays can be used on their own in the production of ceramic tiles.
Journal Article•DOI
Modern approaches for the production of ceramic components
F. Klocke
01 Jan 1997-Journal of The European Ceramic Society
72 Citations
‘Ceramic-adapted machining’ is therefore essential for production of advanced ceramic components.
Journal Article•DOI
Pressure filtration assisted gel casting in translucent alumina ceramics fabrication
Chen Han, Shunzo Shimai, Jin Zhao, Zhengxian Di, Xiaojian Mao, Jian Zhang, Juan Liu, Guohong Zhou, Shiwei Wang 
01 Oct 2018-Ceramics International
14 Citations
In principle, this process can be applied to fabricate any other high-performance ceramic.
Journal Article•DOI
Kinetic analysis of poly(vinyl butyral)/glass ceramic thermal degradation using non-linear heating functions
Leo Chau-Kuang Liau, Yu-Ping Hsieh 
01 Sep 2005-Polymer Degradation and Stability
6 Citations
The results can be applied to the design and operation of the ceramic thermal processing.
Journal Article•DOI
Ceramic material processing by electrical discharge in electrolyte
Hitoshi Tokura, Iwao Kondoh, Masanori Yoshikswa 
01 Mar 1989-Journal of Materials Science
35 Citations
The results obtained showed that a pit can be formed on any ceramic and the pit depth apparently varies with the ceramic material.

Related Questions

Are ceramic flower pots dishwasher safe?7 answers
Are ceramic vases dishwasher safe?5 answers
Can you heat up a ceramic teapot?10 answers
Do you have to cure ceramic cookware?19 answers
How do you clean ceramic bowls?6 answers
How long does a Puffco ceramic bowl last?7 answers

See what other people are reading

Onlay zirconia indirect restoration?
5 answers
What are the potential environmental and health concerns associated with the use of silicon carbide powder in various applications?
5 answers
What are the potential environmental and health concerns associated with the use of silicon carbide powder in various applications?
5 answers
What are the various applications of metal oxides in modern technology?
4 answers
What are the potential applications of using bamboo nanocellulose and reduced graphene oxide for EMI shielding?
4 answers
What are the precursors used in geopolymer?
10 answers
The precursors used in the synthesis of geopolymers are diverse, reflecting the wide range of raw materials that can be activated to form these amorphous silicate polymers. Among the precursors identified, metakaolin is a common choice due to its reactivity and availability, as highlighted in studies where it was activated with sodium hydroxide and sodium silicate to produce geopolymers, and also used in the production of porous mullite ceramics derived from geopolymers. Similarly, nearly pure kaolin has been utilized, benefiting from its minimal impurity content to achieve an ideal geopolymer composition. In addition to these more traditional sources, unconventional aluminosilicate materials have been explored. For instance, natural soil, with a high aluminosilicate content, has been activated using a sodium silicate solution to synthesize geopolymers, demonstrating the potential of less common raw materials in geopolymer production. Construction and demolition wastes (CDWs), containing high silica and alumina, have also been identified as viable precursors, offering a sustainable alternative by reutilizing waste materials. Research has further extended into the use of hazardous solid waste, such as spent fluid catalytic cracking (sFCC) catalyst, as an aluminosilicate precursor, showcasing the capability of geopolymers to immobilize heavy metals. Additionally, a blend of alumina-silicate rich materials has been investigated for one-part alkali-activated cements, aiming to minimize the limitations associated with conventional precursors. Moreover, a quadruple precursor system incorporating fly ash, ground granulated blast-furnace slag, metakaolin, and Portland cement has been examined for geopolymer coatings, indicating the complexity and versatility in precursor selection. Lastly, geopolymers have been synthesized from metabentonite, metadiatomite, and metakaolinite, further expanding the range of raw materials suitable for geopolymerization. This diversity in precursor materials underscores the adaptability of geopolymer technology to various raw material sources, ranging from industrial by-products to natural minerals and waste materials, each contributing unique properties to the resulting geopolymers.How many times does the grain of alumina increase after traditional sintering from the powder?
5 answers
The grain size of alumina increases significantly after traditional sintering from the powder. Research indicates that the grain growth behavior in alumina compacts during sintering falls into two distinct regions. In the region where the porosity remains interconnected, grain growth is negligible; however, when the continuous pore network collapses into isolated pores, grains grow rapidly. This transition in grain growth behavior is observed at around 90% of theoretical density. Additionally, the final grain sizes of alumina can increase after post-HIP treatment, depending on the HIPing temperature or presintering temperature, with maximal strength reaching about 650 MPa when the grain size is around 1 μm.How reflectance affect the laser scanner range measurement?
5 answers
Reflectance significantly impacts laser scanner range measurements. High reflectivity surfaces, like mirrors, glass, or highly reflective materials, can cause errors in distance data due to specular reflections, leading to phantom-like objects and wrong distance measurements. Specular reflections from such surfaces can increase laser signal power, causing disorder in echo detection and recognition, resulting in significant errors in distance observations. Studies suggest that the reflectance of the calibrator used for calibration plays a crucial role in measurement accuracy, with optimal results obtained when using calibrators with specific reflectance levels around 18%. Reflectivity variations can lead to systematic deviations in reflectorless electronic distance measurements, with diffusely reflecting surfaces causing deviations of a few millimeters and directionally reflecting surfaces causing even more significant errors.What is the difference between PEO and PEOP model?
5 answers
The Person-Environment-Occupation (PEO) model focuses on the interaction between the person, environment, and activity, emphasizing their fit and impact on occupational performance. On the other hand, the Person-Environment-Occupation-Performance (PEOP) model extends this by incorporating the concept of performance, highlighting how these factors influence participation, performance, and well-being. While the PEO model is dynamic and applicable across various fields and age groups, the PEOP model specifically aids occupational therapists in addressing clients' occupational concerns holistically. The PEOP model provides a structured approach for practitioners to understand and address barriers to functioning, as demonstrated in the context of individuals with postural orthostatic tachycardia syndrome (POTS).HOW DOES CaO IN STEEL PRODUCTION CAN POLLUTE THE SOIL?
4 answers
CaO in steel production can lead to soil pollution through the disposal of steel slag, a byproduct rich in CaO, onto land. Steel slag, containing CaO along with other components, is often not efficiently utilized, resulting in large stockpiles that can occupy vast areas and cause environmental issues like groundwater and soil pollution. Additionally, the steel industry's operations generate solid wastes that can impact soil quality. The presence of CaO in steel slag, when not properly managed, can contribute to heavy metal contamination in soil. Improper disposal of steel industry waste, including CaO-rich slag, can result in the release of heavy metals like Cd, Cr, Cu, and Pb into the soil, leading to contamination and necessitating soil treatment measures.When to EDM start?
5 answers
EDM, or Electrical Discharge Machining, typically starts when a breakthrough of the ceramic surface layer is detected during the drilling process, transitioning from ultrasonic drilling to EDM operations. Before commencing the EDM process, an apparatus and method can be utilized to detect misaligned electrodes by positioning a test component with a corresponding hole relative to the workpiece, ensuring proper alignment before drilling each hole. The history of EDM dates back to 1943 when Russian physicists Lazarenko first published a paper on the inversion of the wearing effect due to electrical discharge, marking the beginning of EDM as a significant industrial manufacturing process. Additionally, advancements in EDM technology have contributed to its evolution into a crucial method for manufacturing processes, showcasing continuous innovation and technical improvements over time.