Search or ask a question

Do swamp coolers have capacitors?

Electrolytic capacitor

Polymer capacitor

Answers from top 17 papers

PDF

Open Access

More filters

Papers (17)	Insight
Open access•Journal Article•DOI Phase Change Material Based Accumulation Panels in Combination with Renewable Energy Sources and Thermoelectric Cooling Jan Skovajsa, Martin Koláček, Martin Zálešák - Show less +2 more 24 Jan 2017-Energies 33 Citations	Moreover, an interesting possibility is the ability to use thermoelectric coolers.
Journal Article•DOI Ceramic chip capacitors as low temperature thermometers R.R. Li, G.P. Berg, D.B. Mast - Show less +2 more 01 Jan 1992-Cryogenics	Capacitors with room temperature values of 51 and 45 pF have been investigated down to 4.2 K and in magnetic fields up to 9.0 T. The results show that these capacitors can be used as accurate, reproducible temperature sensors at low temperatures, especially in high magnetic fields.
Journal Article•DOI High-temperature dielectrics in CaZrO3-modified Bi1/2Na1/2TiO3-based lead-free ceramics Matias Acosta, Jiadong Zang, Wook Jo, Jürgen Rödel, Jürgen Rödel - Show less +4 more 01 Dec 2012-Journal of The European Ceramic Society 148 Citations	The materials of current investigation are highly attractive for developing capacitors of wide temperature usage.
Journal Article•DOI High-Density Embedded Deep Trench Capacitors in Silicon With Enhanced Breakdown Voltage H. Johari, Farrokh Ayazi - Show less +1 more 20 Oct 2009-IEEE Transactions on Components and Packaging Technologies 39 Citations	This implies that trench-refilled capacitors are free from the very strong temperature sensitivity exhibited by most high-k materials.
Proceedings Article•DOI A solid state variable capacitor with minimum DC capacitance Sisheng Liang, Xi Lu, Runruo Chen, Yang Liu, Shao Zhang, Fang Zheng Peng - Show less +5 more 16 Mar 2014 26 Citations	Therefore, no electrolytic capacitors would be needed.
Proceedings Article•DOI Reliability of silkscreen printed planar capacitors and inductors under accelerated thermal cycling and humidity bias life testing Juha-Veikko Voutilainen, Tuomas Happonen, Juha Häkkinen - Show less +2 more 01 Jan 2012	The Weibull analysis showed that larger capacitors are more vulnerable to combined temperature and humidity bias than smaller ones.
Journal Article•DOI Tantalum Solid Electrolytic Capacitors D. A. McLean, F. S. Power - Show less +1 more 01 Jul 1956 34 Citations	Compared to other electrolytics, these capacitors are superior in low temperature characteristics and in shelf-aging.
Open access•Journal Article•DOI Direct and indirect electrocaloric measurements using multilayer capacitors Sohini Kar-Narayan, N. D. Mathur - Show less +1 more 10 Dec 2009-arXiv: Materials Science	Optimized EC multilayer capacitors could find applications in future cooling technologies.
Proceedings Article•DOI Extending the limits of air cooling with thermoelectrically enhanced heat sinks J. Bierschenk, D. Johnson - Show less +1 more 01 Jun 2004 45 Citations	The prospects of using thermoelectric coolers (TECs) as a means to enhance heat sink performance and extend the limits of air cooling for electronics has considerable appeal when one considers the alternatives of liquid cooling.
Journal Article•DOI Synthesis cooling water system with air coolers Jiaze Ma, Yufei Wang, Xiao Feng, Dongmei Xu - Show less +3 more 01 Oct 2017-Chemical Engineering Research & Design	also indicate that it is particularly necessary to add air coolers to cooling water system in region where water is scarce and electricity price is low.
Journal Article•DOI La-doped Hf0.5Zr0.5O2 thin films for high-efficiency electrostatic supercapacitors Maxim G. Kozodaev, A. G. Chernikova, Roman R. Khakimov, Min Hyuk Park, Min Hyuk Park, Andrey M. Markeev, Cheol Seong Hwang - Show less +6 more 18 Sep 2018-Applied Physics Letters 36 Citations	Moreover, the high thermal stability of such capacitors was confirmed.
Journal Article•DOI Concentrating solar collectors in absorption and adsorption cooling cycles: An overview Ali Sulaiman Alsagri, Abdulrahman A. Alrobaian, Sulaiman A. Almohaimeed - Show less +2 more 01 Nov 2020-Energy Conversion and Management 51 Citations	As a general conclusion, a solar sorption refrigeration could be competitive with the conventional coolers, if a suitable combination of working fluid, solar collector, and refrigeration subsystems would be selected.
Journal Article•DOI Asymmetric Supercapacitors Based on Activated‐Carbon‐Coated Carbon Nanotubes Kaiyuan Shi, Igor Zhitomirsky - Show less +1 more 11 Mar 2015 49 Citations	The asymmetric capacitors developed herein are promising for practical energy-storage applications.
Journal Article•DOI Limited reaction processing: In-situ metal—oxide—semiconductor capacitors James C. Sturm, C. M. Gronet, J. F. Gibbons - Show less +2 more 01 May 1986-IEEE Electron Device Letters	The capacitors exhibit excellent characteristics.
Book Chapter•DOI Characteristics of Capacitor: Fundamental Aspects Jitendra Tahalyani, M. Jaleel Akhtar, Jayesh Cherusseri, Kamal K. Kar - Show less +3 more 01 Jan 2020	These different types of capacitors provide some unique properties.
Open access•Journal Article•DOI Vertical Gardens as Swamp Coolers M.J.M. Davis, F. Ramírez, A.L. Vallejo - Show less +2 more 01 Jan 2015-Procedia Engineering	Thus, a more reliable efficiency is determined for a vertical garden as a swamp cooler.
Journal Article•DOI Analyses of the performance and polar characteristics of two-stage thermoelectric coolers Xiangchun Xuan 01 May 2002-Semiconductor Science and Technology 41 Citations	The information provided in this paper could be useful for both designers and users of TE coolers.

My columns

Related Questions

Do LCD tvs have capacitors?8 answers

Do all HVAC blowers have capacitors?15 answers

Do all furnace blowers have a capacitor?9 answers

How do you install a capacitor on a speaker?8 answers

How much is a pool pump capacitor?9 answers

Where to find air conditioner capacitor?8 answers

See what other people are reading

How do p-n junction semiconductors work?

P-N junction semiconductors function based on the interaction between P-type and N-type materials. When these materials are joined, a depletion region forms due to the diffusion of majority charge carriers (electrons and holes) across the junction. This region acts as an insulator, separating the conductive P and N doped regions. The built-in potential across the junction is determined by the carrier densities on each side. The interface of the P-N junction can be optimized to increase modulation efficiency and reduce power consumption in optoelectronic devices. Understanding the fundamentals of P-N junction diodes is crucial, as they are the basis for various electronic and optoelectronic technologies. By utilizing effective strategies like one-step solution crystallization, high-quality bilayer P-N heterojunctions can be achieved, enhancing the performance of organic field-effect transistors.What an capacitor is?

A capacitor is an electronic device used to store electric charge by utilizing two conductors separated by an insulating material, known as a dielectric. This passive component can store energy similar to batteries and is crucial in various electronic and electrical systems. Capacitors have different types based on the materials and construction techniques used, each offering unique properties. The capacitance of a capacitor depends on the geometry of the electrodes and the dielectric constant of the material. By altering the dielectric material, the capacitance of a capacitor can be increased, allowing it to store and release charge quickly. Capacitors play a vital role in providing power in electronic devices and systems, making them essential components in modern technology.Moisture content of oil ?

The moisture content of oil is a critical parameter in various industrial processes, impacting oil quality and production efficiency. Different studies have proposed innovative methods for measuring moisture content in oil. One approach involves utilizing high-frequency electromagnetic signals sensitive to dielectric constants of oil and water to optimize measurement accuracy. Another study introduces a device using terahertz imaging technology for nondestructive testing of moisture content in dielectric oil, emphasizing high accuracy and automation. Additionally, a new technology based on single-chip microcomputers offers automatic and precise moisture content detection in crude oil, enhancing production management and efficiency. These diverse approaches highlight the importance of accurate moisture content measurement in oil-related industries for quality control and operational optimization.What is the current state of ADC compensation research and what are the main unsolved problems?

Current research in ADC compensation focuses on innovative techniques to address inherent challenges like capacitor mismatch and analog signal path errors. Techniques like Dynamic Element Matching (DEM)and backpropagation-based compensationhave shown promising results in improving ADC performance. However, challenges persist, such as the need for adaptive background compensation to mitigate errors caused by process variations in CMOS implementations, the impact of time-interleaved ADC (TI-ADC) mismatches on receiver performance, and the nonlinear distortion induced by TI-ADC structures in full-duplex transceivers. Unsolved problems include achieving high manufacturing yield in the presence of process variations, maintaining robustness and convergence speed in compensation techniques, and effectively mitigating ADC imperfections to ensure optimal system performance.What are the design a MEMS screech capacitive sensor?

A MEMS capacitive sensor typically consists of a capacitor structure with various components like backplates, membranes, electrodes, and dielectric materials. These sensors are designed to measure pressure by detecting changes in capacitance due to pressure variations. Different designs have been proposed to enhance sensor performance. For instance, one design involves using a corrugated membrane with circular ridges and grooves to improve linearity in the capacitance-pressure response. Another design utilizes interdigital electrode (IDE) structures, where sensitivity increases with the width and depth of the sensing film. Additionally, some sensors incorporate multiple substrates, grooves, and electrodes to enhance linearity and reliability. These design variations aim to optimize sensor sensitivity, linearity, and overall performance for diverse applications in pressure measurement.What are the remaining unsolved problems of frequency synthesizer?

The remaining unsolved problems of frequency synthesizers include issues such as ensuring high accuracy despite temperature fluctuations and manufacturing variations, achieving a narrow channel interval while minimizing phase noise and spurious signals, preventing PLL circuits from locking before transmitting a standby frequency, which can interfere with reception, outputting all waveforms without increasing memory capacity and reducing side lobes, and maintaining a voltage control signal within a specified range while the synthesizer is in a locked state. These challenges highlight the ongoing need for advancements in frequency synthesizer technology to address issues related to accuracy, interference, waveform generation, and voltage control.What is starter cell in this publication?

In the publications provided, a starter cell is described in different contexts. In one instance, a starter cell is designed for plant growth, featuring openings for seeding and root passage, along with strategically placed ridges to guide root development and prevent twisting. Another mention of a starter cell refers to its role in a circuit, where it is part of a system that couples and decouples a power supply input to a supply capacitor based on the switching status of the circuit. Additionally, a different publication discusses a starter cell used in a fuel cell system, where part of the fuel is converted into hydrogen gas to enhance starting performance, especially at low temperatures. These varied applications highlight the diverse functionalities of starter cells in different fields.How to caluclate the natural frequency of an RLC series circuit?

To calculate the natural frequency of an RLC series circuit, various factors need to be considered. The natural frequency increases with plate distance but decreases with plate area and linear inductance coefficient. Additionally, the resonance and anti-resonance frequencies can be accurately determined by analyzing the impedance values of the circuit, even in the presence of damping effects. The circuit's components, such as resistance, inductance, and capacitance, play crucial roles in determining the natural frequency. Moreover, the medium inside the capacitor, dielectric constant, and special radiation generated due to charge imbalances impact the spectral form of the radiation, influencing the overall behavior of the circuit.How does the piezoelectric coefficient of BCZT compare to that of PVDF under different loading conditions?

The piezoelectric coefficient of BCZT ceramic varies based on the loading conditions. BCZT ceramic exhibits a piezoelectric coefficient of approximately 577 pC/N. On the other hand, PVDF, when incorporated into piezoelectric composites, shows a piezoelectric charge coefficient (d33) of around 26-27 pC/N and a piezoelectric voltage coefficient (g33) of 16.0 × 10−3 V·m/N when combined with BZT ceramic. Furthermore, the addition of BCZT nanowires into a PVDF-TrFE matrix enhances the piezoelectric properties, with a composite containing 15 wt % BCZT nanowires achieving a high energy harvesting figure of merit of 5.3 × 10–12 m2/N. These findings highlight the superior piezoelectric performance of BCZT ceramic compared to PVDF under different loading conditions, emphasizing the potential for BCZT-based composites in energy harvesting and sensor applications.How does the chemical composition of Nb2O5 affect the redox properties of a GCE modified electrode?

The chemical composition of Nb2O5 significantly influences the redox properties of a GCE modified electrode. Different studies have explored the synthesis and modification of Nb2O5 to enhance its electrochemical performance. For instance, the synthesis of Nb2O5/rGO composites has shown improved specific capacitance and electron transfer compared to rGO alone. Additionally, in situ doping of alkali metals in Nb2O5 has demonstrated a twofold enhancement in photoelectrochemical water splitting efficiencies, indicating improved charge carrier density and surface charge transfer. Moreover, Nb2O5/graphene nanocomposites have exhibited superior electrochemical conductivity and cyclic stability, making them effective electrodes for supercapacitor applications. These findings collectively highlight the crucial role of Nb2O5 chemical composition in enhancing the redox properties of GCE modified electrodes.How does compression point of switch HEMT increase as the gate biasing resistor increases?

The compression point of a switch HEMT increases as the gate biasing resistor increases. This relationship is crucial for accurate modeling in both digital and analog attenuator applications, validating the capacitance network and extraction methods under various bias conditions. Additionally, the accurate current model near the knee voltage is essential for simulating power compression characteristics in high-power-switch applications, with an improved GaN HEMT model proposed to enhance accuracy and flexibility. Furthermore, investigations on p-GaN power HEMTs reveal on-resistance instability induced by gate bias, with thermal activation affecting both on-resistance increase and decrease, attributed to hole traps in the AlGaN barrier below the gate. Understanding these factors is vital for optimizing HEMT performance in different operational scenarios.