scispace - formally typeset
Search or ask a question

How do you get corrosion off washing machine hoses? 

Corrosion
Direct torque control
Gas compressor
Torque
Turbine

Answers from top 8 papers

More filters
Papers (8)Insight
Journal Article•DOI
The effects of washing on LiNi0.83Co0.13Mn0.04O2 cathode materials
Shiguo Xu, Wang Xingning, Zhang Wenyan, Kaihua Xu, Zhou Xiaoyan, Zhang Yujun, Haibo Wang, Jianqing Zhao 
01 Jun 2019-Solid State Ionics
28 Citations
The results show that partial loose fine powder in cracks between primany particles fell off during the washing process.
Open access•Journal Article•DOI
Effects of surface washing on the mitigation of concrete corrosion under sewer conditions
Xiaoyan Sun, Guangming Jiang, Tsz Ho Chiu, Mi Zhou, Jurg Keller, Philip L. Bond 
01 Apr 2016-Cement & Concrete Composites
29 Citations
The results suggest that frequent washing at short intervals of a few months might be needed to control corrosion over a long term.
Proceedings Article•DOI
Sensorless Direct Flux and Torque Control for Direct Drive washing machine applications
Radu Bojoi, B. He, F. Rosa, F. Pegoraro 
01 Nov 2011
16 Citations
This solution provides very good performance under current and voltage limitations and represents a viable alternative for washing machine applications.
Journal Article•DOI
Monitoring of crevice corrosion with the electrochemical frequency modulation technique
A Rauf, Walter Bogaerts 
01 Dec 2009-Electrochimica Acta
18 Citations
The results show that in most cases these causality factors do change when the system goes from uniform corrosion to crevice corrosion.
Journal Article•DOI
Dynamic Modeling and Analysis of Drum-type Washing Machine
Hee-Tae Lim, Weui-Bong Jeong, Keunjoo Kim 
25 Jun 2010-International Journal of Precision Engineering and Manufacturing
49 Citations
In designing drum type of washing machine, it is efficient than finite element method to analyze behaviors of drum and tub.
Journal Article•DOI
Gas turbine compressor washing state of the art-field experiences
Jean-Pierre Stalder
01 Apr 2001-Journal of Engineering for Gas Turbines and Power-transactions of The Asme
54 Citations
The implementation of an optimized regime of on line and off line washing in the preventive turbine maintenance program is important.
Proceedings Article•DOI
Performance investigation of extended Kalman filter based observer for PMSM using in washing machine applications
Handan Nak, Mehmet Onur Gulbahce, Metin Gokasan, Ali Fuat Ergene 
01 Nov 2015
10 Citations
Simulation results illustrate that the proposed system is quite effective for washing machine applications and robust against variations of motor parameters.
Open access•Proceedings Article•DOI
Compressor Washing Maintains Plant Performance and Reduces Cost of Energy Production
Jean-Pierre Stalder, Peter van Oosten 
13 Jun 1994
24 Citations
The evaluation of the results demonstrate the importance of implementing an optimised regime of on line and off line washing in the preventive turbine maintenance program.

Related Questions

How do you clean corrosion off a shower head?4 answers
How do you clean corrosion off of steel pennies?5 answers
How do you get corrosion off coins?16 answers
How do you get rid of corrosion on pipes?7 answers
How do you remove corrosion from a water valve?9 answers
How to remove corrosion from outdoor spigot?7 answers

See what other people are reading

How does the use of organic additives affect the properties of cement?
5 answers
The use of organic additives in cement can significantly impact its properties. Enzymes like EarthZyme can influence the mechanical properties of mortars, affecting ultrasonic pulse velocity, flexural strength, and compressive strength, with varying effects at different ages. Additionally, non-functional organosilicon compounds can hydrophobize cement systems, with specific compounds like SKTN preventing efflorescence formation. Organic additives such as methyl hydroxyethyl cellulose can affect the physical and mechanical durability of cement under sulfate-ionic media exposure, altering density, setting time, water retention, and early strength gain of the mixtures. Moreover, mineral additives like polymer additives in combination with cement can enhance the properties of Portland cement-reinforced soils, making them suitable for road construction applications.What happens if beeswax is mixed with oil?
5 answers
Mixing beeswax with oil results in various outcomes depending on the context. When beeswax is added to braking systems, it acts as a biocorrosion inhibitor, enhancing corrosion resistance and reducing surface roughness. In structured oil, beeswax's crystallization behavior affects the stability and crystal structure of emulsions, impacting food quality. Gelation of the oil phase with beeswax in double emulsions enhances stability, oral sensation, and flavor release, with tunable properties based on beeswax mass ratios. Combining beeswax fractions in edible oleogels increases oxidation stability compared to using beeswax alone, with different fractions influencing the oxidative stability of the product. Additionally, forming edible oil-loaded beeswax microparticles through the PGSS process results in uniform incorporation of oils into the crystalline lattice of beeswax, creating functional food ingredients with specific morphologies.What is the effect of axial compression on the mechanical properties of non-compact mixed-tube rectangular columns?
5 answers
Axial compression significantly influences the mechanical properties of various types of columns. Studies on different types of columns like stirrup-corroded concrete columns, GFRP tube-confined coal gangue steel fiber short concrete columns, elliptical concrete-filled steel tube (CFST) columns, precast circular semi-continuous concrete-filled steel tube (PCSCFST) columns, and CFRP-confined rectangular concrete-filled stainless steel tube (CFSST) stub columnshave shown that axial compression affects parameters such as ultimate bearing capacity, deformation resistance, failure modes, and stress-strain curves. Factors like the thickness of confinement tubes, fiber volume fraction, concrete mix proportions, compaction conditions, and bolt characteristics play crucial roles in determining the mechanical behavior under axial compression. Understanding these effects is essential for predicting the performance and designing efficient non-compact mixed-tube rectangular columns.What temperature is kerosene usually stored at in industrial applications?
5 answers
Kerosene is typically stored at varying temperatures in industrial applications. Research indicates that kerosene can be stored at low temperatures using specialized equipment like a low-temperature kerosene supply device, which involves a liquid nitrogen storage tank and a cooling pipeline to maintain low temperatures. On the other hand, kerosene can also be subjected to high temperatures during processes like evaporation studies, where it was experimentally investigated at temperatures ranging from 500 to 1000°C. This wide temperature range showcases the versatility of kerosene in industrial settings, where it can be stored or utilized under both low and high-temperature conditions based on specific requirements.What is the use of jet tubes in a jet engine?
4 answers
Jet tubes in a jet engine serve the purpose of prolonging the combustion residence time of fuel in the combustion chamber, thereby enhancing the combustion heat energy of the fuel. Additionally, in a Venturi jet engine, the jet flow injection principle of the Venturi tube allows for the engulfment of plenty of air into the engine body, which is then ejected with the original jet flow, increasing propulsion efficiency. Furthermore, a jet flow jet engine utilizes jet tubes to facilitate the circulation process of air inlet, combustion expansion, and air inlet, enabling the engine to apply external work effectively. Lastly, in a jet flow discharge nozzle, the design of the nozzle with a bifurcation helps reduce noise by mitigating adverse effects on noise levels.What are the advantages of hidropower?
4 answers
Hydropower offers numerous advantages, making it a significant renewable energy source. It boasts high reliability, proven technology, efficiency around 90%, low operating costs, flexibility, and substantial storage capacity. Additionally, asynchronous generators are highlighted as efficient solutions for small-scale installations, especially in isolated grids with single-phase consumers, enhancing hydropower's usability. Furthermore, hydraulic turbines, independent of dams, are cost-effective and show promise in Europe and Brazil, showcasing the technology's adaptability and low-cost nature. Moreover, pumped storage hydro plants play a crucial role in large-scale energy storage, aiding in integrating intermittent sources like wind and solar power, despite operational constraints downstream. These combined advantages underscore hydropower's importance in the renewable energy landscape.How to create high impact feedbaCK?
4 answers
To create high-impact feedback, various methods can be employed based on different contexts. One approach involves utilizing a high-pressure-impact power generation device that harnesses the force of water to generate power efficiently. Another method involves employing a high-impact voltage generating device that utilizes a closed structure with a modular impact generation loop to enhance transmission overvoltage and improve safety performance. Additionally, a high-impact piezoelectric accelerometer can be used to filter out high-frequency large-amplitude accelerations, reducing zero drift and improving accuracy in feedback mechanisms. By incorporating these technologies and principles, feedback systems can be designed to deliver impactful and accurate results in various applications.What is the relationship between trunk angle and pitch velocity in baseball players?
5 answers
The relationship between trunk angle and pitch velocity in baseball players is crucial for understanding pitching performance. Studies have shown that trunk rotation velocity normalized to peak velocity is significantly correlated with ball speed, elbow valgus torque, and shoulder external rotation torque. Additionally, changes in trunk posture affect pitching movement and torque exertion in the elbow joint, impacting ball releasing velocity. Furthermore, hip shoulder separation has been found to be related to trunk rotation velocity and pitch velocity, highlighting the importance of this interplay in maximizing pitching performance. These findings emphasize the significance of trunk angle and its coordination with hip and shoulder movements in generating ball velocity during baseball pitching.Wind powered electicity?
5 answers
Wind power can be harnessed to generate electricity through various innovative systems. One approach involves a wind-powered electricity generator with a supporting tube, rotating device, drive device, mounting frame, guiding board, and fan bodies. Another system utilizes a wind deflecting structure to create accelerated flow paths for turbines, which are connected to an energy converter to produce electricity. Additionally, a wind-power electromobile integrates a wind-driven generator connected to an inverter and motor on a chassis, offering a zero-emission, cost-effective, and unlimited travel distance solution. Furthermore, a Savonius rotor electrical generating system directly connects the rotor to an electrical generator, providing a constant DC voltage source for DC equipment regardless of wind direction. These systems showcase the diverse methods of utilizing wind power for electricity generation.What are the objectives for wind farm layout optimization?
5 answers
The objectives for wind farm layout optimization include maximizing the farm's output energy, minimizing the effects of the wake phenomenon, and enhancing annual energy production while considering factors like wind characteristics, topographic data, and roughness. Various optimization methods such as particle swarm optimization (PSO), genetic algorithms, and hybrid algorithms are employed to achieve these objectives. The optimization process aims to strategically place wind turbines within a farm to improve efficiency, reduce costs, and mitigate environmental impacts. By utilizing powerful optimization algorithms and considering factors like wind direction, speed variability, and wake-effect, researchers strive to develop optimal layouts that enhance the overall performance and sustainability of wind farms.What change the aluminum level in the tap water in a year?
9 answers
The aluminum level in tap water can fluctuate over a year due to various factors, including the source of the water, the treatment processes it undergoes, and environmental influences. Studies have shown that aluminum is more likely to be found in surface waters than in groundwaters, with a significant chance that alum coagulation can increase aluminum concentration in finished water above its original levels in raw water. This suggests that water treatment processes, specifically the use of aluminum-based coagulants, play a crucial role in altering aluminum levels in tap water over time. Seasonal variations also impact aluminum concentrations. For instance, corrosion behavior in aluminum kettles, influenced by the presence of certain ions in tap water, indicates that environmental factors such as temperature and ion concentration can affect aluminum levels. Moreover, the presence of aluminum in drinking water has been linked to health concerns, including Alzheimer's disease, with studies noting an increase in Alzheimer cases correlating with higher aluminum content in tap water. Research into the management of aluminum levels in water supplies highlights the importance of monitoring and controlling these levels to mitigate health risks. Techniques for detecting changes in residual aluminum levels in drinking water have been developed, emphasizing the need for vigilant water quality management. Additionally, the effectiveness of treatment methods like chemical precipitation and reverse osmosis in removing aluminum from water has been documented, offering solutions to reduce aluminum concentrations. Unexpected patterns of lead release in drinking water, influenced by seasonal variations in aluminum concentration, further illustrate the complex interplay between different factors affecting water quality throughout the year. Innovations in water purification technology aim to decrease the concentration of aluminum ions in tap water, thereby reducing the potential health risks associated with aluminum exposure. In summary, the aluminum level in tap water can change over a year due to the water source, treatment processes, environmental factors, and seasonal variations. Continuous monitoring and innovative treatment methods are essential for managing these fluctuations and minimizing health risks.