scispace - formally typeset
Search or ask a question

How do you get scratches out of a white ceramic sink? 

Abutment (dentistry)
Ceramic
Digital holography
Silicon carbide
Scratch

Answers from top 7 papers

More filters
Papers (7)Insight
Journal Article•DOI
Evolution mechanism of surface roughness during ion beam sputtering of fused silica
Mingjin Xu, Yifan Dai, Lin Zhou, Xiaoqiang Peng, Shaoshan Chen, Wenlin Liao 
10 Jul 2018-Applied Optics
12 Citations
The plastic scratches and micro-particles can be removed, while the brittle scratches can be passivated, so that surface defects can be reduced and surface quality improved.
Open access•Journal Article•DOI
Digital holographic reconstruction detection of localized corrosion arising from scratches
Liang Wang, Shenhao Chen, Boyu Yuan, Fanjiang Meng, Jianqiu Wang, Chao Wang, Liang Li 
01 Jan 2010-Journal of The Serbian Chemical Society
8 Citations
It provides a method to detect localized corrosion arising from scratches.
Open access•Journal Article•DOI
Oxidation resistance of bulk plasma-facing tungsten alloys
F. Klein, T. Wegener, Andrey Litnovsky, Marcin Rasinski, Xiaoyue Tan, Xiaoyue Tan, Jesus Gonzalez-Julian, Janina Schmitz, Janina Schmitz, Martin Bram, J. W. Coenen, Ch. Linsmeier 
01 May 2018-Nuclear materials and energy
33 Citations
It is shown that scratches initiate failure of the protective oxide.
Journal Article•DOI
Ultrasonic vibration-assisted scratch characteristics of silicon carbide-reinforced aluminum matrix composites
Pingfa Feng, Guiqiang Liang, Jianfu Zhang 
01 Aug 2014-Ceramics International
58 Citations
Large particles were observed in the grooves formed by the traditional scratch method, whereas small chips of SiC were found in the scratches formed by UVAS, which indicated that the material removal ratio was higher for the scratches formed by UVAS than that of scratches formed by the traditional method.
Journal Article•DOI
Microstructure and abrasive wear in silicon nitride ceramics
C.P. Doǧan, J.A. Hawk 
01 Oct 2001-Wear
51 Citations
Nonetheless, characteristics of the ceramic microstructure do influence its hardness and fracture toughness and must, therefore, play an active role in determining how a ceramic will respond to the specific stress states imposed upon it by the wear environment.
Open access•Journal Article•DOI
Analysis of Scratches Formed on Oxide Surface during Chemical Mechanical Planarization
Jae-Gon Choi, Y. Nagendra Prasad, In-Kwon Kim, In-Gon Kim, Woo-Jin Kim, Ahmed Busnaina, Jin-Goo Park 
01 Feb 2010-Journal of The Electrochemical Society
24 Citations
Large particles would play a significant role in increasing the number of scratches.
Journal Article•DOI
Influence of abutment substrate and ceramic thickness on the colour of heat-pressed ceramic crowns.
Takahiro Nakamura, O. Saito, J. Fuyikawa, Shoichi Ishigaki 
01 Sep 2002-Journal of Oral Rehabilitation
94 Citations
Therefore, when making a restoration using a leucite-based heat-pressed ceramic crown, it is advisable to use tooth-coloured materials such as a porcelain veneered cast post, if you will not be able to make the ceramic more than 1.6 mm thick.

Related Questions

How do you get pan marks off a ceramic sink?7 answers
How do you get stains out of ceramic bakeware?6 answers
How do you polish ceramic dishes?5 answers
How do you remove scratches from a ceramic cooktop?5 answers
How do you remove stains from a ceramic griddle?6 answers
What is best cleaner for ceramic sinks?3 answers

See what other people are reading

HOW DOES CaO IN STEEL PRODUCTION CAN POLLUTE THE SOIL?
4 answers
CaO in steel production can lead to soil pollution through the disposal of steel slag, a byproduct rich in CaO, onto land. Steel slag, containing CaO along with other components, is often not efficiently utilized, resulting in large stockpiles that can occupy vast areas and cause environmental issues like groundwater and soil pollution. Additionally, the steel industry's operations generate solid wastes that can impact soil quality. The presence of CaO in steel slag, when not properly managed, can contribute to heavy metal contamination in soil. Improper disposal of steel industry waste, including CaO-rich slag, can result in the release of heavy metals like Cd, Cr, Cu, and Pb into the soil, leading to contamination and necessitating soil treatment measures.What are the negative impact of 3D Printing in terms of Material Limitations for Researchers?
5 answers
3D printing poses material limitations for researchers due to factors such as low density and poor mechanical properties of nanoceramic parts fabricated using this technique. The microstructural inhomogeneity resulting from the deposition methodology in 3D printing leads to defects in the microstructure, affecting the quality of the printed parts. Additionally, the high manufacturing costs associated with producing nanoceramic parts using 3D printing techniques limit their industrial application. These challenges hinder the widespread adoption of 3D printing in materials research, emphasizing the need for further development to enhance the properties and cost-effectiveness of printed materials.What is a different simplex lattice design?
4 answers
A variety of simplex lattice designs have been utilized in different fields for optimization purposes. For instance, a modified Scheffe’s simplex lattice design method was employed to determine optimal compositions of ceramic materials for gas purification equipment. In another study, simplex lattice design was applied to predict drug release patterns from extended release diclofenac sodium tablets. Furthermore, the Simplex Lattice Design method was used to optimize the formulation of aloe vera extract liquid soap, considering parameters like viscosity, specific gravity, foam resistance, and pH. Additionally, Simplex Lattice Design models were developed to assess the suitability of run-off sand for concrete production and predict the Modulus of Rupture of Concrete beams. Lastly, simplex lattice design was employed to optimize the formulation of andrographolide self-nanoemulsifying drug delivery systems, focusing on characteristics like emulsification time, droplet size, and drug content.What are the potential applications of using piezoelectric ceramic in water treatment and purification processes?
5 answers
Piezoelectric ceramics offer promising applications in water treatment. They can drive advanced oxidation technologies (AOTs) for efficient water decontamination by generating reactive oxygen species. Additionally, piezoelectric materials can enhance catalytic redox reactions, enabling the degradation of organic dyes in wastewater. Furthermore, the integration of piezoelectric ceramic in filters can enhance filtration efficiency and degrade organic pollutants through in-situ piezoelectric chemical reactions, making them suitable for sewage treatment. By coupling piezoelectric nanomaterials with ultrasound platforms, such as BaTiO3 nanorods chemically conjugated with silica gel, toxic chemicals and cells can be efficiently degraded, offering a green approach for water purification. These diverse applications highlight the versatility and effectiveness of piezoelectric ceramics in various water treatment and purification processes.Do i need to combust the glass fiber filter before usage?
5 answers
Yes, in some cases, it is necessary to combust the glass fiber filter before usage. For instance, in the preparation of ECR glass fiber filter cloth, the filter base cloth is passed through hot water for hot cleaning and then through hot air for combustion, enhancing its resistance to strong-acid substances and improving its strength and filtering efficiency. Additionally, silicon carbide filters require calcination at high temperatures in a nonoxidative atmosphere to form a metallized electrode, which aids in burning out carbon particles stuck on the filter to regenerate it before use. However, not all glass fiber filters require combustion; some are designed to resist high temperatures, acid, and alkali without the need for pre-combustion treatment.What is the effect of PLA dissolution in DMF on the mold's microstructure and subsequent brittleness in air?
5 answers
Dissolving PLA in DMF can impact the mold's microstructure and subsequent brittleness in air. The dissolution process can lead to changes in the mechanical properties of PLA, affecting its brittleness. Additionally, post-processing techniques like annealing can further influence the material's properties. Moreover, the addition of LTI in PLA/PCL blends has been shown to improve fracture toughness by reducing void formation and stress concentration, ultimately enhancing ductile deformation and toughness values. Chemical post-processing methods applied to PLA pieces can alter structural, thermal, and crystallinity properties, potentially increasing thermal resistance and improving surface roughness significantly. These combined effects highlight the intricate relationship between PLA dissolution, post-processing treatments, and resulting material characteristics.What are the current advancements in the development of additive manufacturing techniques for carbon fiber reinforced polymers (CFRP)?
5 answers
Current advancements in additive manufacturing techniques for carbon fiber reinforced polymers (CFRP) include the development of novel systems like conformal CFRP-AM, which leverages multi-DoF motion to fabricate grid-stiffened shell structures with improved mechanical performance. Additionally, the Rapid Interlayer Curing Assisted (RICA) 3D printing strategy enables the fabrication of thermoset composites with any commercially available resin and fibers, achieving high mechanical properties. Furthermore, a unique additive manufacturing approach involves coating continuous carbon fibers with polycarbosilane and coextruding them with SiC ink to produce high-strength Cf/SiC composites with enhanced flexural strength and density. These advancements showcase the potential for AM to revolutionize the production of CFRP by offering design freedom, improved mechanical properties, and customized structures.Why the cell is considered a dielectric?
5 answers
Cells are considered dielectric because of their unique electrical properties. At low frequencies, cells exhibit conductivity characteristics, where the electrical signal cannot pass through the cell membrane due to its capacitor properties. As the excitation frequency increases, the cell behaves more like a permittivity characteristic, allowing current to flow through the membrane with increased current density. The dielectric response of cells is crucial for monitoring and characterizing their status, with modelling approaches providing insights into the interaction of biological matter with electromagnetic fields. Experimental studies have shown that both the real and imaginary parts of the Clausius-Mossotti factor are essential for deriving accurate cell dielectric properties, indicating changes in membrane and cytoplasm conductivities and permittivities under varying medium conductivities.What are some of the latest advancements in car body dent detection technology?
5 answers
The latest advancements in car body dent detection technology involve innovative approaches utilizing image processing and deep learning techniques. One method proposes an automatic system based on image measurement, employing a two-times shooting technique to identify dents and scratches on car surfaces, along with a neural network for precise dent localization. Another study introduces a model using image datasets and a convolutional neural network to classify scratch zones on vehicle surfaces, achieving high detection accuracy and noise reduction. Additionally, a technique leveraging machine learning methods like You Only Look Once and Faster Region-based Convolutional Neural Networks has been developed to detect scratches, cracks, and other damages efficiently, enhancing inspection processes for car bodies. These advancements aim to streamline inspection procedures, improve accuracy, and reduce manual inspection costs and time.How can ceramic pieces be identified through iconography?
4 answers
Ceramic pieces can be identified through iconography by analyzing various elements such as geometric patterns, human and animal motifs, and stylistic shapes present on the vessels. By characterizing the iconography and analyzing the combination of different motifs and visual resources, insights into the society's culture and relationships can be gained. Research has shown that archaeological patterns in the Southwest U.S. shared a common "pictorial code" in their ceramic production, which was also investigated in surrounding areas of Mesoamerica. Additionally, a method and system for recognizing ceramic artwork have been developed, utilizing databases for ceramic artwork images and seals, allowing for automatic recognition and high accuracy in identifying ceramic pieces.Must the preprocessing steps be same for finetuning with roberta pretrained model?
5 answers
The preprocessing steps for fine-tuning with a RoBERTa pre-trained model may not necessarily be the same across different studies. While some research focuses on fine-tuning RoBERTa for specific tasks like document classification, others explore the efficiency of fine-tuning only critical layers to achieve good solutions. Additionally, there are instances where pre-trained models like PhoBERT are tuned on specific datasets using techniques like layer freezing and block-wise learning rate for tasks such as text classification. Therefore, the preprocessing steps for fine-tuning with RoBERTa can vary based on the specific task, dataset, and the approach taken in each study.