Search or ask a question

How do you stop a ceramic cooktop from staining?

Fracture (geology)

Degree of reaction

Answers from top 6 papers

PDF

Open Access

More filters

Papers (6)	Insight
Journal Article•DOI The use of Y2O3 coatings in preventing solid-state Si-base ceramic/metal reaction R. L. Mehan, M. R. Jackson, M. D. McConnell - Show less +2 more 01 Nov 1983-Journal of Materials Science 24 Citations	Even though the Y2O3 coating tends to become detached from the sputtered ceramic after one heating cycle, modifications in the surface chemistry of the ceramic continues to provide protection from further attack.
Journal Article•DOI Differences in ion release after ceramic-on-ceramic and metal-on-metal total hip replacement: MEDIUM-TERM FOLLOW-UP Lucia Savarino, M. Greco, Elisabetta Cenni, L. Cavasinni, Roberto Rotini, Nicola Baldini, Armando Giunti - Show less +6 more 01 Apr 2006-Journal of Bone and Joint Surgery-british Volume 74 Citations	For this reason, the low corrosion level in a ceramic-on-ceramic coupling could be advantageous.
Journal Article•DOI Strength and Failure Behaviour of Spark Plasma Sintered Steel-Zirconia Composites Under Compressive Loading Lutz Krüger, Sabine Decker, R. Ohser-Wiedemann, D. Ehinger, Stefan Martin, Ulrich Martin, H.J. Seifert - Show less +6 more 01 Sep 2011-Steel Research International 23 Citations	The main reason for the damage is the relatively weak ceramic-ceramic interface within the ceramic clusters.
Journal Article•DOI Fracture of a ceramic component in total hip replacement Paul Whittingham-Jones, Bhupinder Mann, P. Coward, Alister Hart, John A. Skinner - Show less +4 more 01 Apr 2012-Journal of Bone and Joint Surgery-british Volume 22 Citations	We present the case as a warning that fracture of a ceramic component should be revised to another ceramic-on-ceramic articulation in order to minimise the risk of further catastrophic wear.
Journal Article•DOI Structures of the Boron-Rich Boron Carbides from Neutron Powder Diffraction: Implications for the Nature of the Inter-Icosahedral Chains G. H. Kwei, Bruno Morosin - Show less +1 more 09 May 1996-The Journal of Physical Chemistry 149 Citations	This, together with results from sequential runs with the same ceramic sample, suggests that the vacancies in the ceramic materials are intrinsic to their synthesis and do not result from radiation damage, as has been suggested.
Open access•Journal Article•DOI Spectrophotometric evaluation of the color changes of different feldspathic porcelains after exposure to commonly consumed beverages. Chandni Jain, Akshay Bhargava, Sharad Gupta, Rishi Rath, Abhishek Nagpal, Prince Kumar - Show less +5 more 01 Apr 2013-European Journal of Dentistry 23 Citations	Among all the five test solutions, Coffee showed the maximum staining of the ceramic whereas maximum surface roughness was shown by the Duceram Kiss (1.48 μm) by Orange Juice which could be due to its high titratable acidity.

My columns

Related Questions

What are the limitations of using calamansi as a stain remover?3 answersCalamansi has limitations as a stain remover. It is not effective for the removal of certain stains, such as green, black, vegetable, and nicotine stains from teeth. Additionally, calamansi may not be suitable for use on all types of stains and surfaces, as its effectiveness may vary depending on the specific stain and material. Furthermore, the use of calamansi as a stain remover may not be practical in certain situations, such as in wastewater treatment, due to its low solubility in pure water and the potential for dissolution in the presence of high salt concentrations. These limitations highlight the need for alternative stain removal methods and products that can effectively address a wide range of stains and surfaces.

How do I make my ceramic tile less slippery?7 answers

How do you clean a ceramic top griddle?5 answers

How do you get stains out of ceramic bakeware?6 answers

What is the best ceramic stove top cleaner?17 answers

What's the best ceramic cooktop cleaner?7 answers

See what other people are reading

What are the potential applications of using piezoelectric ceramic in water treatment and purification processes?

Piezoelectric ceramics offer promising applications in water treatment. They can drive advanced oxidation technologies (AOTs) for efficient water decontamination by generating reactive oxygen species. Additionally, piezoelectric materials can enhance catalytic redox reactions, enabling the degradation of organic dyes in wastewater. Furthermore, the integration of piezoelectric ceramic in filters can enhance filtration efficiency and degrade organic pollutants through in-situ piezoelectric chemical reactions, making them suitable for sewage treatment. By coupling piezoelectric nanomaterials with ultrasound platforms, such as BaTiO3 nanorods chemically conjugated with silica gel, toxic chemicals and cells can be efficiently degraded, offering a green approach for water purification. These diverse applications highlight the versatility and effectiveness of piezoelectric ceramics in various water treatment and purification processes.Why can one surfactant be better than another in forming smaller nanoparticles?

One surfactant can be better than another in forming smaller nanoparticles due to its ability to reduce the critical radius of hydroxide clusters, preventing their growth and coagulation. This leads to the formation of nanoparticles with smaller particle sizes, closer to the critical size of the single-domain state for each material. For example, in the synthesis of Co(OH)2 nanoparticles, sodium dodecyl sulfate (SDS) was found to increase dispersion by over 2 times compared to other surfactants, resulting in nanometer-sized particles with a narrow size distribution. Additionally, the use of specific surfactants like Y12-carbamate can stabilize hydrophobic nanoparticles, facilitating their dispersion and preventing flocculation. Therefore, the choice of surfactant plays a crucial role in controlling the size and dispersion of nanoparticles during synthesis.What is the period of time when the fault conducts oil and gas？?

The period when faults conduct oil and gas varies based on geological factors. In the Shiwu fault depression of the southern Songliao basin, petroleum accumulation occurred during three distinct periods: the end of the Denglouku Formation, the Quantou Formation-Nengjiang Formation period, and the end of the Nengjiang Formation. Similarly, in the Changling fault depression, gas accumulation took place during different phases in various tectonic units, such as the Yingcheng Formation and Denglouku Formation of Shuangtuozi structure, Haerjin structure, and the Quantou Formation of Fulongquan structure. These findings highlight the complex evolution of faults and the diverse periods when oil and gas activities occur, emphasizing the importance of understanding the geological history for effective resource exploration and development.What is the effect of PLA dissolution in DMF on the mold's microstructure and subsequent brittleness in air?

Dissolving PLA in DMF can impact the mold's microstructure and subsequent brittleness in air. The dissolution process can lead to changes in the mechanical properties of PLA, affecting its brittleness. Additionally, post-processing techniques like annealing can further influence the material's properties. Moreover, the addition of LTI in PLA/PCL blends has been shown to improve fracture toughness by reducing void formation and stress concentration, ultimately enhancing ductile deformation and toughness values. Chemical post-processing methods applied to PLA pieces can alter structural, thermal, and crystallinity properties, potentially increasing thermal resistance and improving surface roughness significantly. These combined effects highlight the intricate relationship between PLA dissolution, post-processing treatments, and resulting material characteristics.Why the cell is considered a dielectric?

Cells are considered dielectric because of their unique electrical properties. At low frequencies, cells exhibit conductivity characteristics, where the electrical signal cannot pass through the cell membrane due to its capacitor properties. As the excitation frequency increases, the cell behaves more like a permittivity characteristic, allowing current to flow through the membrane with increased current density. The dielectric response of cells is crucial for monitoring and characterizing their status, with modelling approaches providing insights into the interaction of biological matter with electromagnetic fields. Experimental studies have shown that both the real and imaginary parts of the Clausius-Mossotti factor are essential for deriving accurate cell dielectric properties, indicating changes in membrane and cytoplasm conductivities and permittivities under varying medium conductivities.Is there any process to treat the slag comming from the pyrometallurgyc process in chemical way?

A chemical method for treating slag from pyrometallurgical processes involves various approaches such as sulfation-sulfate decomposition roasting followed by water leaching to recover metals like nickel, cobalt, and copper. Another method includes the use of modifying agents in a pyrometallurgical reactor to produce modified slag with hydraulic activity for applications in Portland cement manufacturing. Additionally, a processing method for copper pyrometallurgical slag involves mixing the slag with a reduction agent, heating it to obtain molten iron, harmless slag, and a gaseous mixture containing lead and zinc, which is then oxidized to produce zinc oxide and lead oxide. Furthermore, a thermal energy recovery method, the molten slag cascade recovery method, utilizes chemical reactions like gasification, pyrolysis, and calcination to improve exergy efficiency in recovering waste heat from molten slag.Is there any process to treat the slag comming from the pyrometallurgyc process?

Yes, there are several processes available to treat slag from pyrometallurgical processes. One method involves a pyro-hydrometallurgical process that includes roasting, leaching, and separation steps to recover nickel, cobalt, and copper from copper slag. Another approach utilizes a processing method where copper pyrometallurgical slag is mixed with a reduction agent, heated to obtain molten iron, harmless slag, and a gaseous mixture containing lead and zinc, which are then separated and processed for recycling. Additionally, there are methods for treating steel slag to produce modified slag suitable for use in Portland cement production, involving stabilization of various components through chemical composition adjustments and reduction reactions. Furthermore, a slag treatment process involves adding a metal sulfide to the slag ladle to recover copper efficiently, avoiding safety hazards and improving the recovery rate of copper.Is there any process to treat the slag output comming from the pyrometallurgyc process?

Yes, there are several processes to treat slag produced in pyrometallurgical operations. One method involves a pyro-hydrometallurgical process for treating copper slag, which allows for the recovery of nickel, cobalt, and copper while reusing iron. Another approach includes a method where copper pyrometallurgical slag is mixed with a reduction agent, heated to over 1800°C to obtain molten iron, harmless slag, and a gaseous mixture containing lead and zinc, which can then be further processed for recycling. Additionally, in traditional copper production routes, slags are treated to recover copper by reducing the viscosity of the slag through the addition of a reductant, aiding in the settling process and potentially increasing copper recovery. These methods demonstrate efficient ways to manage and recycle slag from pyrometallurgical processes.How can ceramic pieces be identified through iconography?

Ceramic pieces can be identified through iconography by analyzing various elements such as geometric patterns, human and animal motifs, and stylistic shapes present on the vessels. By characterizing the iconography and analyzing the combination of different motifs and visual resources, insights into the society's culture and relationships can be gained. Research has shown that archaeological patterns in the Southwest U.S. shared a common "pictorial code" in their ceramic production, which was also investigated in surrounding areas of Mesoamerica. Additionally, a method and system for recognizing ceramic artwork have been developed, utilizing databases for ceramic artwork images and seals, allowing for automatic recognition and high accuracy in identifying ceramic pieces.How does bone traction lead to DVT?

Bone traction can lead to Deep Vein Thrombosis (DVT) due to the immobilization following bone surgery, which significantly increases the risk of DVT. Patients undergoing surgical treatment for lower limb fractures due to malignancy are at a higher risk of DVT, especially in the immediate postoperative period, with increased risk associated with metastasis, arthroplasty, and adjuvant therapy. The use of bone traction devices can help in fracture traction and stretching, allowing patients more freedom and potentially avoiding complications like DVT caused by prolonged bed rest. Additionally, the integration of traction beds simplifies the traction process, making it more convenient, but the risk of DVT remains due to the immobilization effect of traction. Overall, bone traction can contribute to DVT by promoting immobility, especially in high-risk patients undergoing orthopedic procedures.What are the mechanisms by which thermal stress induces fractures and deformation in brittle stars?

Thermal stress induces fractures and deformation in brittle stars through various mechanisms. Firstly, thermal stresses around magma bodies can create an extensive fracture network by brittle yielding, influenced by cooling-induced decompression within the intrusion. Additionally, in enhanced geothermal systems, the temperature difference between injected fluid and surrounding bedrock induces thermal stress along fracture walls, potentially damaging self-propping asperities and altering fracture lifespan. These thermal stresses can exceed confining pressure, leading to the development of fracture networks around magmatic bodies. Understanding these mechanisms is crucial for comprehending how thermal stress impacts brittle stars' structural integrity and deformation processes.