scispace - formally typeset
Search or ask a question

Answers from top 8 papers

More filters
Papers (8)Insight
Present research could be beneficial for extensive utilization of thermoelectric heat pump in daily life by the use of ambient air source energy.
Furthermore, an analysis model reproducing the experiment is suggested to examine the efficient operation of the heat-pump system.
The study provided sufficient information for further work to reduce pressure pulsations in the residual heat removal pump.
This study demonstrates that the potential of flexible heat-pump operation is frequently overstated.
This model allows a more reasonable prediction in the performance of an actual heat pump.
This study will be helpful in designing the actual thermoelectric heat pump systems.
Thus, the capacitor deterioration can be diagnosed.
The findings from this study are meant to optimize the high capital costs of ground-source heat-pump systems in the study area.

See what other people are reading

Soil thermal accumulation using zero priced electricity and accumulated energy use later?
5 answers
Soil thermal accumulation can effectively harness zero-priced electricity for energy storage, offering a sustainable solution for later use. Utilizing the soil as a natural material for thermal energy accumulation can significantly reduce energy consumption. Underground thermal energy storage serves as a viable method to accumulate excess heat energy during periods of abundance, such as summer, and release it when needed, like in winter. Ground-coupled heat pump systems demonstrate the efficiency of soil temperature changes over time, emphasizing the importance of balancing cooling and heating loads for optimal performance. Additionally, embedding heat exchange tubes in concrete piles proves to be an efficient technique for exploiting underground thermal energy, showcasing economic benefits through simulation and analysis. These methods collectively highlight the potential of soil thermal accumulation using zero-priced electricity for sustainable energy utilization.
What does the infiltration loss mean for greenhouses?
5 answers
Infiltration loss in greenhouses refers to the amount of air that enters or escapes the greenhouse through leaks, affecting the heating load and energy efficiency. It plays a crucial role in determining the heating load calculation methods for greenhouse designs. Infiltration rates are influenced by factors like temperature differences between indoor and outdoor environments, wind speed, and greenhouse structure. Ground heat exchange and infiltration loss significantly impact the overall heating load of a greenhouse, with infiltration loss being more pronounced in scenarios with high temperature differences. Efficient management of infiltration loss is essential for energy conservation and environmental sustainability in greenhouse operations. Therefore, understanding and controlling infiltration rates are vital for optimizing heating systems and ensuring efficient energy use in greenhouse environments.
What are the potential environmental benefits of using a heat pump source with PVT (Phase Change Materials) technology?
5 answers
Utilizing a heat pump source with PVT (Photovoltaic-Thermal) technology incorporating Phase Change Materials (PCMs) offers significant environmental advantages. PVT collectors efficiently convert solar radiation into both heat and electricity, enhancing energy harvesting. PCMs, when integrated with solar collectors or heat pumps, contribute to energy savings during a building's operational phase, thereby reducing carbon dioxide emissions and fossil fuel consumption. Additionally, incorporating PCMs in heat pump systems can lead to improved system efficiency, reduced energy consumption, and stable system performance. The combination of PVT technology with PCMs not only enhances energy efficiency but also minimizes environmental impact throughout the system's life cycle, making it a promising solution for sustainable building energy systems.
What is the average temperature in Quebec during different seasons of the year?
5 answers
The average temperature in Quebec varies significantly across different seasons. In Montreal, the heating season lasts for six months with a design temperature of -23°C (-10°F). Over the past 45 years, the mean annual temperature in Quebec has increased by 1.3°C, indicating a warming trend. Soil temperature data collected at various depths in Quebec showed that as the prediction horizon expands, the accuracy of temperature predictions progressively improves. A study on the thermal regions of southern Quebec highlighted the importance of local climate studies due to significant temperature variations in different areas like urban centers, islands, coastal regions, and valleys. These findings collectively emphasize the dynamic and diverse temperature patterns experienced in Quebec throughout the year.
Based on the findings, how sure can the latent heat storage be effective in reducing energy consumption?
4 answers
The research findings suggest that latent heat thermal energy storage (LHTES) can be highly effective in reducing energy consumption. LHTES, utilizing phase change materials (PCMs), offers a promising solution to enhance thermal system performance and improve energy efficiency in various applications such as vehicle cooling systems, building heating systems, and industrial processes. Studies have shown that PCM integration can extend cooling times, decrease charging and discharging times, and reduce heating energy consumption in buildings. The use of PCM in LHTES systems has been proven to store thermal energy efficiently, correct energy production-consumption disparities, and increase overall process efficiency. The increasing interest in LHTES research, along with government policies promoting energy conservation, further supports the effectiveness of latent heat storage in reducing energy consumption.
What is the effect of crystallinity on chemical doping efficiency of conjugated polymers?
4 answers
The effect of crystallinity on the chemical doping efficiency of conjugated polymers has been studied in several papers. It has been found that high crystallinity in conjugated polymers leads to improved doping efficiency. The higher crystallinity enhances the charge transfer between the polymer and the dopant molecules, resulting in a higher charge carrier density and electrical conductivity. Additionally, high crystallinity helps to maintain the original crystalline structure and good charge transport pathways even after doping, leading to higher carrier mobility. Therefore, optimizing the crystallinity of conjugated polymers is crucial for maximizing the power generation and electrical conductivity of doped conjugated polymer films.
Is there a limit in terms of components for the calphad method?
5 answers
The CALPHAD method does not have a specific limit in terms of the number of components that can be used. It is a powerful method for dealing with phase equilibria and thermodynamic properties of multicomponent alloy systems. The method allows for the construction of multicomponent databases and can be used to calculate phase diagrams and thermodynamic properties for systems with any number of components. However, the accuracy of the predictions may depend on the availability and quality of experimental data and the thermodynamic evaluations of binary systems. It is important to note that the accuracy of the predictions may be affected by the presence of miscibility gaps, intermetallic phases, and the density of phase boundaries in the system. Therefore, the credibility and accuracy of the predictions may vary depending on the specific system being studied and the quality of the thermodynamic database used.
Are there free CALPHAD programs or packages for python?
5 answers
Yes, there are free CALPHAD programs or packages available for Python. The pycalphad software package is a free and open-source Python library that allows for designing thermodynamic models, calculating phase diagrams, and investigating phase equilibria using the CALPHAD method. This software provides routines for reading thermodynamic databases and solving the multi-component, multi-phase Gibbs energy minimization problem. It also allows for programmatically manipulating and overriding thermodynamic models and databases at run-time without modifying any internal solver or calculation code. This flexibility makes pycalphad an ideal tool for CALPHAD database development and model prototyping.
Are there High Temperature Heat Pumps available with Pentane?
5 answers
Yes, there are High Temperature Heat Pumps available with Pentane. The abstract from Ganesan and Eikevikmentions the use of CO2/pentane mixtures in the High-stage (HS) cycle of a two-stage cascade refrigeration system for high-temperature heating applications. These mixtures exhibit excellent thermo-physical properties and can deliver high-temperature water with a temperature lift of 70 °C. Additionally, the abstract from Mota-Babiloni, Mateu-Royo, and Navarro-Esbrídiscusses the future possibilities of High-temperature heat pumps (HTHPs) and mentions that advanced configurations are feasible due to the relatively higher temperature lifts. Therefore, it can be inferred that High Temperature Heat Pumps with Pentane are available and can be used for high-temperature heating applications.
What is the N-type Cu2SnSe3?
4 answers
N-type Cu2SnSe3 is a medium-high temperature thermoelectric semiconductor with the chemical formula Cu2Sn3.5S7. It is prepared using a mechanical alloying technique, where Cu, Sn, and S powders are ball milled for two hours and then annealed at 700°C. The resulting semiconductor exhibits a Seebeck coefficient of -698.38 V/K at 877 K, an electric conductivity of 1.18x10^4 W.m^-1, a heat conductivity of 0.43 W.K^-1.m^-1, and a maximum thermoelectric optimum value (ZT) of 1.17. This material is pollution-free, has a long service life, and can be used for manufacturing medium-high temperature power generation components.
What studies did to mitigate the cold blow that happens with air source heat pump in cold climates ?
5 answers
To mitigate the cold blow that happens with air source heat pumps in cold climates, several studies have been conducted. One approach is the use of oscillatory circuits to break ice on the evaporator heat exchanger. Another method is the implementation of a quasi two-stage compression cycle technology, which utilizes a rotor compressor with a medium pressure air supply to improve the heating performance of the water heater system. Additionally, the impact of cold exhaust on building-scale climate has been investigated, showing a substantial cooling effect that decreases air temperatures within the site boundary when multiple heat pump water heaters operate concurrently. Furthermore, the use of a ground temperature potential recovery system has been explored to address the ground thermal imbalance issue in geothermal heat pumps, resulting in improved performance and increased effective service life. These studies aim to enhance the operation and efficiency of air source heat pumps in cold climates.