scispace - formally typeset
Search or ask a question

Answers from top 17 papers

More filters
Papers (17)Insight
Open accessBook ChapterDOI
Dave Singelée, Bart Preneel 
17 Aug 2006
We propose a new initialization mechanism for the key agreement protocol of Bluetooth.
Proceedings ArticleDOI
K.W. Ho, Howard C. Luong 
04 Aug 2002
25 Citations
With a 1.2V supply, the amplifier delivers 20dBm output power with 35% PAE and can be integrated for class 1 Bluetooth application.
In addition, the wireless transmission module, which eliminates the inconvenience of wiring, can be switched between radio frequency (RF) and Bluetooth according to the transmission distance.
This power amplifier is suitable for low-power and short-range applications such as Bluetooth Low Energy (BLE).
Open accessJournal ArticleDOI
31 Jul 2017
In this paper, we propose a Bluetooth-enabled software defined radio platform to communicate through Bluetooth for controlling and changing configurations of software defined radio and realizing connected audio applications.
In view of this fact, we propose an environment controller combining the Bluetooth technology.
As a result, the stackable feature of the amplifier module enables us to provide the cost-effective introduction into the network on an implement-it-when-necessary based service in a fully compatible way with the existing stackable ROADM modules, when constructing the S-ROADM with an amplifier.
Thus, the amplifier module has a big advantage to use it flexibly and economically in the IP-over-CWDM networks.
This broadband amplifier module offers the advantage of fewer components, less power insertion loss, small size and high linearity.
Proposed amplifier can be used as a power amplifier in low power applications such as ZigBee or Bluetooth.
With this technology, devices will be able to discover any other Bluetooth-enabled device, determine its capabilities and applications, and establish connections for data exchange.
In the proposed architecture the standard Bluetooth software stack may be used for the controller management.
The solution proposed provides wideband operation satisfying Bluetooth functionality with good radiation pattern and gain.
A fully functional prototype is successfully fabricated and tested, demonstrating a promising solution for Bluetooth applications.
In this paper, an innovative and effective procedure to measure the average power that is dissipated by Bluetooth modules in different operating conditions is proposed.
Proceedings ArticleDOI
04 Dec 2005
10 Citations
A fully functional prototype has been successfully fabricated, showing a promising solution for Bluetooth applications.
The fabricated 2.45 GHz amplifier module using the proposed topology demonstrates enhanced efficiencies in the low- to mid-power ranges and shows good gain flatness.

See what other people are reading

Is there glasses for the hearing impaired people?
5 answers
Yes, there are glasses designed specifically to assist hearing-impaired individuals. These glasses utilize advanced technologies like speech recognition, sound localization, and text-to-speech capabilities to enhance the auditory experience for the hearing impaired. For instance, smart glasses like VI-SPECS and HE-SPECS have been developed to aid individuals with visual and hearing impairments. Additionally, a smart glass named EyeHear has been created to address the sound localization issue faced by the hearing-impaired, providing real-time direction of speech sources and transcriptions through a modified speech recognition algorithm. These glasses aim to improve spatial awareness, communication in challenging listening environments, and overall quality of life for individuals with hearing disabilities. Furthermore, the integration of modern technologies in these glasses showcases a promising future for assistive devices for the hearing impaired.
Should businesses be innovative to enhance customer engagement?
4 answers
Businesses should be innovative to enhance customer engagement. Customer engagement is rated as a top priority for all businesses, as it leads to consumer loyalty. Utilizing technologies like BLE beacon technology and mobile applications can provide personalized notifications to customers, increasing engagement. Additionally, businesses must find innovative ways to increase customer engagement as online purchases from retailers continue to rise. In the hospitality industry, a restaurant's innovativeness positively influences customers' willingness to pay a higher price, and customer engagement plays a role in enhancing prices in upscale restaurants. Customer interactivity is also important in the hotel industry for enhancing customer engagement. Therefore, businesses should focus on implementing innovative strategies and technologies to effectively engage customers and enhance their overall experience.
Is there any convenient way to calculate app to app distance?
4 answers
There are several convenient ways to calculate app to app distance. One method involves using the average distance between the user's eyes (pupillary distance) to calculate the screen to face distance. This method does not require calibration and can be implemented as an Android application using face detection technologies. Another method involves using Bluetooth signals to calculate the distance between two mobile phones with Bluetooth modules. By judging the source of the Bluetooth signal and calculating the intensity values, an accurate distance can be determined. Additionally, a handheld digital device can measure the working distance between the device and the user's eyes by capturing images and comparing the apparent angular size of the eyes or face to a known size. The working distance can then be calculated and saved or displayed. Another method involves using modulated audible signals containing time-based information to determine the distance between two devices. This calculated distance can be used for locking and unlocking devices based on proximity. Finally, an application can be used to measure distance by detecting a measurement mark in an image and calculating the distance based on the occupied pixel area.
Is there any convenient way to calculate mobile UI app to app distance?
5 answers
There is a convenient way to calculate mobile UI app to app distance. A system has been developed that determines the distance between user interface (UI) elements on a graphical user interface (GUI). This system includes modules for extracting UI elements, determining margins, creating logical blocks, identifying neighboring UI elements, computing distances, and displaying the distances. Additionally, a method has been proposed that calculates the distance between two mobile phones with Bluetooth modules using Bluetooth signals. This method involves receiving a Bluetooth signal, judging its source, calculating an intensity value, and then calculating the distance based on the intensity value. By accurately receiving and measuring the Bluetooth signal, this method provides an accurate calculation of the distance between mobile phones.
How many transistors do Class A amplifiers use?
5 answers
Class A amplifiers use at least one transistor for amplification.
What is the percentage target for Remote patient monitoring?
4 answers
Remote patient monitoring (RPM) is a form of telehealth that improves quality of care for chronic disease treatment and reduces hospital readmission rates. The adoption of RPM varies depending on the socioeconomic status (SES) of the households near the hospitals. Rural hospitals near households in the lower middle quartile SES have a 33.5% lower likelihood of adopting RPM compared to rural hospitals near households in the highest quartile SES. Similarly, urban hospitals near households in the lowest quartile SES have a 41.9% lower likelihood of adopting RPM compared to urban hospitals near households in the highest quartile SES. The penetration rate of remote monitoring for cardiac implantable electronic devices (CIEDs) recipients is significantly lower than expected, with only 22% of pacemaker patients and 74% of implantable cardioverter defibrillator (ICD) patients being followed remotely in Europe. The Mayo Clinic RPM program has supported nearly 22,000 patients across 17 programs and has shown positive clinical outcomes, including lower hospitalization rates and readmissions.
What is the role of connectivity in in-car infotainment systems?
4 answers
Connectivity plays a crucial role in in-car infotainment systems. It enables the transmission of telemetry data, such as car speed, RPM, engine temperature, and oil level, to the IoT Cloud for analysis and display to the driver. Additionally, connectivity allows for the integration of mobile devices and internet-based services, enhancing the user's comfort and providing access to personal information through the automotive head unit. However, this connectivity also introduces security and privacy concerns, as demonstrated by studies on IVI system exploitations. To address these concerns, it is important to optimize antenna systems within the car to ensure adequate connectivity performance. Furthermore, systematic analysis and countermeasures are necessary to prevent unauthorized access and privacy attacks on the infotainment system.
How to gather agricultural data from sensors?
5 answers
Efficient data collection from agricultural sensors can be achieved through the use of wireless sensor networks (WSN) and IoT technology. These technologies enable the collection of refined and intelligent agricultural data. The data collection process involves the use of various sensors and processes, with the optimal workstation and wireless sensor being selected based on the specific job requirements and the relationship between the task and the sensor. Additionally, the data collection procedure should consider established criteria for information accuracy. The collected data can be transmitted wirelessly and analyzed using edge computing techniques, which combine the power of edge devices and wireless sensor technology. The effectiveness of this approach has been demonstrated through simulation models and comparative evaluations, showing superior performance compared to conventional methods. Overall, the integration of wireless sensor networks, IoT technology, and edge computing enables efficient and accurate agricultural data collection.
What the typical photocurrent need for a photodetector in a imagining system?
4 answers
The typical photocurrent needed for a photodetector in an imaging system can vary depending on the specific application and requirements. However, high-current photodetectors are often beneficial in microwave and millimeter-wave photonic systems. High photocurrent increases the dynamic range, reduces loss and noise figure in externally-modulated links, and can simplify high-bit-rate digital receivers. Increasing the output photocurrent also allows for higher output RF signal levels directly from the photodetector. The maximum photocurrent that can be achieved may be limited by space-charge or thermal effects, with thermal effects being particularly important for long-term reliability. The specific photocurrent needed for a photodetector in an imaging system will depend on the desired performance and trade-offs between dynamic range, noise figure, and system complexity.
What is the typical photocurrent required for efficient operation of photodetectors in imaging systems?
5 answers
The typical photocurrent required for efficient operation of photodetectors in imaging systems varies depending on the specific design and application. However, recent advancements in photodiode technology have enabled the generation of high RF power directly from the output of a photodiode, with maximum small-signal compression currents exceeding 700 mA at 300 MHz. In the case of germanium vertical p-i-n photodetectors, the photocurrent is shown to be proportional to the width of the depletion layer, which allows for high-speed operation. In the case of InAs/GaAs p-i-p quantum dots infrared photodetectors, the device exhibits low dark current and large photocurrent at room temperature. For two-dimensional-electron-gas-based AlGaN/GaN metal-semiconductor-metal photodetectors, the photocurrent response characteristics indicate a peak response at a specific wavelength, suggesting a potential for high-speed operation. Therefore, the required photocurrent for efficient operation of photodetectors in imaging systems can vary depending on the specific technology and design.
What is a neurotype?
5 answers
A neurotype refers to a classification or categorization of neurological disorders based on genetic and neurobiological markers. It is a concept that aims to identify specific physiological and behavioral characteristics that are influenced by genetic variation and can help bridge the gap between genetic mechanisms and clinical diagnosis. Neurobiological endophenotypes, which are stable and genetically influenced markers, have become a major focus in the study of alcohol-use disorders, schizophrenia, and other complex diseases. These endophenotypes provide a more direct link to underlying genetic factors and can aid in the identification of specific genetic variations associated with the disorders. The concept of endophenotypes has been successful in other areas of medicine, such as alcoholism and late-onset Alzheimer's disease, and can also be used for biological classification of mental disorders.