scispace - formally typeset
Search or ask a question

Answers from top 9 papers

More filters
Papers (9)Insight
Based on these conclusions, we present a novel TSV-defect detection and diagnosis method using switched-capacitor circuits.
Additionally, at low frequencies, if the ESR value of the capacitor is known, through its comparison with the maximum value given by the manufacturer, it is possible to estimate its condition.
We propose a simple method to monitor the quality of MIM capacitor.
The proposed on-line fault detection technique is able to estimate the capacitor ESR value during converter operation.
A detailed investigation of the radiation behaviour of motherboard-subboard structures leads to the conclusion that with a suitable pin configuration of the interboard connector the field emission can be considerably reduced.
This investigation confirms that a bank of power capacitors can generate significant noise if the capacitor current contains high frequency harmonics.
Furthermore, a new capacitor lifetime monitoring technique is proposed, which employs this signal for calculating equivalent series resistance of the capacitor.
Proceedings ArticleDOI
Barbaros Kirisken, H. Fatih Ugurdag 
17 Apr 2014
22 Citations
Results show that the optimized capacitor is not the cheapest, most expensive, or most reliable one; optimal capacitor is a modest Chinese “CAP.
Measurements show that the mismatch depends on the capacitor area but not on the spacing; thus, for a given mismatch specification, the lateral-field MOM capacitor can have arbitrarily small capacitance by increasing the spacing between the capacitor fingers, at the expense of increased chip area.

See what other people are reading

What is the role of the dc link capacitor in the PV system regarding the ripple effect?
5 answers
The DC-link capacitor in a PV system plays a crucial role in smoothing voltage ripples and stabilizing the DC voltage. It helps in charging/discharging, smoothing the DC voltage, and stabilizing fluctuations in the DC-link voltage. The selection of an appropriate capacitance for the DC-link capacitor is essential, as it directly impacts the system's voltage stabilization. While larger capacitance is ideal for voltage stabilization, practical limitations such as cost, volume, and size constraints need to be considered. Different PWM strategies can affect the DC-link voltage ripple, emphasizing the importance of analyzing ripple effects to determine the optimal capacitance for the DC-link capacitor.
How does the DC link capacitor affect the ripple effect in a PV system?
5 answers
The DC-link capacitor in a PV system plays a crucial role in smoothing the DC voltage and reducing ripple effects. Capacitors are commonly used in PV inverters for their fast charging/discharging characteristics. However, issues like leakage current due to parasitic capacitance can arise, affecting system efficiency. To address this, innovative solutions like using a Boost converter to eliminate leakage current and transferring ripple to a separate capacitor have been proposed, enhancing system performance. Additionally, strategies involving switched-capacitor topologies have been suggested to suppress voltage ripples and limit short-circuit currents, improving system stability. By monitoring the DC-link capacitor's condition and capacitance changes, potential failures and safety hazards can be preemptively managed, ensuring the reliability and longevity of PV systems.
What are the advantages of using amorphous polymers such as polydimethylsiloxane in capacitive structures?
5 answers
Amorphous polymers like polydimethylsiloxane (PDMS) offer several advantages in capacitive structures. PDMS is biocompatible, flexible, and easy to fabricate, making it suitable for applications like capacitive ECG bioelectrodes. PDMS can be modified to have a low dielectric constant, reducing parasitic capacitance noise and improving the signal-to-noise ratio in flexible capacitive sensors. Additionally, PDMS films can be tailored to exhibit specific dielectric properties by adjusting composition ratios and thicknesses, allowing for tunability in capacitance and relative permittivity. Furthermore, PDMS-based capacitive sensors with a multi-layer stepped mesoporous microstructure show enhanced linearity and sensitivity, making them ideal for pressure sensing applications. Overall, the versatility, biocompatibility, and tunability of PDMS make it a valuable material for various capacitive structures.
How does the performance of electric propulsion systems compare to traditional chemical propulsion systems?
5 answers
Electric propulsion systems offer various advantages over traditional chemical propulsion systems in terms of efficiency, environmental impact, and future trends. Research compares fully electric and hybrid marine propulsion systems, highlighting the benefits of waste heat recovery and hybrid turbochargers for efficiency enhancement. Additionally, advancements in electric propulsion include various types like electrothermal, electrostatic, and electromagnetic systems, offering flexibility based on mission requirements. Novel designs in electric propulsion focus on improving environmental performance, with systems utilizing electric capacitors for thrust generation. Despite challenges like mass and size limitations, efforts to reduce the weight and dimensions of electric propulsion systems are ongoing, emphasizing the importance of synchronous generators for improved performance and compatibility. Overall, electric propulsion systems demonstrate superior reliability, maneuverability, and safety compared to traditional chemical propulsion systems, aligning with the trend towards electrification in automotive engines.
How does interpolation work in real-life scenarios?
4 answers
Interpolation is used in various real-life scenarios to fill in missing or intermediate data points based on existing data. In the context of language learning, students engage in tasks that involve reflective thinking, verbalization, and writing, leading to the creation of natural dialogues. In the field of auralization, interpolation is used to generate artifact-free audio signals by running simulations in a separate thread and interpolating the outputs. In digital signal processing, interpolation involves computing the difference between current and previous values of a signal and deriving interpolation values to be output at defined points. In the design of interpolation circuits, capacitors and switches are used to generate interpolated outputs. In video processing, interpolation is used to generate pixels between lines of pixels from multiple input images, with spatial phase correction and pre-compensation to approximate the phase of the current pixel.
Is rcf mentioned as xg in papers?
5 answers
An RC polyphase filter (RCPF) is mentioned in one of the papers as XCSFG. However, there is no mention of RCF being referred to as XG in any of the papers provided.
What factors contribute to the development of portable jump starter technology?
5 answers
The development of portable jump starter technology is influenced by several factors. One factor is the need for versatility and convenience, utility, and economy, which has led to the addition of wireless charging circuit units to jump starters, allowing them to be used as wireless power supply means for various smart devices. Another factor is the incorporation of safety features such as vehicle battery isolation sensors and reverse polarity sensors, which ensure that power is only delivered when a good battery is connected with the proper polarity. Additionally, the use of fast charging high energy storage capacitor systems has been implemented to provide a rapid and effective way to jump start a vehicle. Furthermore, the development of highly conductive electrical pathways within jump starting devices has improved the efficiency of power delivery to the vehicle battery. Lastly, the integration of microcontrollers in portable chargers allows for the coordination of safety functions and the interruption of power connection until proper voltage is sensed, ensuring safe jump starting.
Why reliability in electromobility is important?
4 answers
Reliability in electromobility is important because it directly impacts the performance and safety of electric vehicles. The increased complexity and sensitivity of electrical/electronic (E/E) systems in autonomous, connected, and electrified automobiles make them more susceptible to particulate contamination, which can lead to short circuits. The reliability of key components such as batteries, motor controllers, and electric motors is crucial for the overall reliability and cost-effectiveness of electric vehicles. Additionally, the reliability of auxiliary units like electric refrigerant compressors is essential for the extended lifetime of electric vehicles. Power electronics, commonly used in electric and hybrid-electric vehicles, are also prone to reliability issues due to harsh environmental conditions and stresses. Improving the reliability of electric transport systems can reduce operating costs and capital investments by minimizing downtime for maintenance and repair.
What project i built in AI electronics?
5 answers
In the field of AI electronics, a project has been developed to diagnose Printed Circuit Boards (PCB) using an Automatic Optical Inspection (AOI) system. This system utilizes a neural network approach to classify visible defects on a SMT-PCB. Another project focuses on the commercialization of Organic and Large-area Electronics (OLAE) in Europe. The COLAE project aims to promote the commercial exploitation of OLAE technology, provide training and support services, and establish an OLAE feasibility network. Additionally, a project demonstrates the use of artificial intelligence (AI) for automatic online real-time optimization of a power electronics converter. This project utilizes a dual active bridge (DAB) converter and a deep deterministic policy gradient (DDPG) algorithm to achieve improved efficiency in power conversion and supply. Finally, a project aims to develop a new class of memory devices for AI applications. This project focuses on controlled incorporation of metal ions into the insulating layer of a Metal Oxide Semiconductor (MOS) transistor to create a low-energy, non-volatile, and neuromorphic memory device.
What is Impedance Matching?
4 answers
Impedance matching is a technique used to optimize the transfer of power between a source and a load by minimizing reflections and maximizing power transfer. It is crucial in various fields such as wireless communication, high-frequency circuits, and RF/millimeter-wave design. In wireless communication, impedance matching ensures efficient communication by compensating for the impedance mismatch caused by factors like human body impedance. In high-frequency circuits, impedance matching is achieved using narrow band or broadband matching techniques with lumped or distributed elements. In RF/millimeter-wave design, integrated transformers are used for impedance matching due to their improved quality factors at high frequencies. Impedance matching plays a vital role in optimizing performance and ensuring effective power transfer in various applications.
How to use LCR meter for studying properties of chitosan based films?
4 answers
LCR meter can be used to study the properties of chitosan-based films. The charging and discharging characteristics of chitosan films can be tested using an RC series circuit with the supply voltage in DC. The LCR meter can be used to measure various physical and mechanical properties of chitosan films, such as the stresses in the drying film, density, and Young's modulus. The LCR meter can also be used to evaluate the effect of plasticizers on the mechanical, thermal, barrier, structural, morphological, and antimicrobial properties of chitosan films. Additionally, the LCR meter can be used to investigate the electrical properties of chitosan-based nanocomposite polymer electrolytes, such as AC conductivity, dielectric properties, electric modulus, and electrical impedance spectroscopy. Overall, the LCR meter is a valuable tool for studying the properties of chitosan-based films and can provide important insights into their characteristics.