Search or ask a question

Is Gotham copper cookware good?

Composite number

Answers from top 8 papers

PDF

Open Access

More filters

Papers (8)	Insight
Journal Article•DOI Lack of a Recommended Dietary Allowance for Copper may be Hazardous to Your Health Leslie M. Klevay 01 Aug 1998-Journal of The American College of Nutrition 86 Citations	Augmenting low copper diets with high copper foods may be beneficial.
Journal Article•DOI Tribological properties of MoNx coatings in contact with copper J. Valli, U. Mäkelä, H. T. G. Hentzell - Show less +2 more 01 Nov 1986-Journal of Vacuum Science and Technology 43 Citations	A new promising coating material for copper forming tools is MoNx, which has low galling tendency in an unlubricated contact with copper.
Journal Article•DOI Cold gas dynamic spraying of a novel micro-alloyed copper: Microstructure, mechanical properties Nan Kang, Pierre Coddet, Hanlin Liao, Christian Coddet - Show less +3 more 25 Nov 2016-Journal of Alloys and Compounds 19 Citations	The post heat treatments indicate that micro-alloyed copper presents higher recrystallization temperature than that of pure copper.
Journal Article•DOI Dynamic oxidation of a Cu—30vol.%Cr coating on a copper-based alloy K.T. Chiang, T.A. Wallace, R.K. Clark - Show less +2 more 01 Dec 1996-Surface & Coatings Technology 13 Citations	The coating provided good oxidation protection for the copper alloy substrate under dynamic environment at 650–760°C.
Journal Article•DOI Friction and wear behavior of Cu–CeO2 nanocomposite coatings synthesized by pulsed electrodeposition Venu Mangam, Sumit Bhattacharya, Karabi Das, Siddhartha Das - Show less +3 more 25 Oct 2010-Surface & Coatings Technology 55 Citations	The experimental results indicate that the wear resistance of copper composite is superior to that of pure copper at all the loads and it improves with the increasing amount of ceria in the copper matrix.
Open access•Journal Article•DOI Tribological Behavior of Copper/MWCNT Nanocomposites Produced by Pulse Electrodeposition Harun Gül, Mehmet Uysal, Hatem Akbulut, Ahmet Alp - Show less +3 more 01 Jan 2014-Acta Physica Polonica A 17 Citations	The experimental results indicated that the wear resistance of copper composite is superior to that of pure copper.
Journal Article•DOI The effects of grooming on a copper ablative coating: a six year study. Melissa Tribou, Geoffrey Swain - Show less +1 more 12 Jun 2017-Biofouling 31 Citations	The results suggest that grooming is a viable method for maintaining copper ablative coatings in a fouling-free condition without adverse increases in the total copper output.
Journal Article•DOI Minimum film boiling temperature for cooldown of insulated metals in saturated liquid Yoshihiro Kikuchi, T. Hori, Itaru Michiyoshi - Show less +2 more 01 Jun 1985-International Journal of Heat and Mass Transfer 36 Citations	The calculated results are in good agreement with experimental data for liquid nitrogen boiling on Teflon-coated copper plates.

My columns

Related Questions

How do you keep copper chef pans from sticking?6 answers

What brand of copper cookware does Nick Stellino use?12 answers

What happened to Copper Chef pans?19 answers

What is the warranty on copper chef pans?6 answers

What should I look for when buying a copper pan?9 answers

Where is lagostina copper cookware made?7 answers

See what other people are reading

Why the presence of SO42-, CO32-, and PO43- ions reduces the reduction efficiency for zvi for Cr(VI)?

The presence of SO42-, CO32-, and PO43- ions reduces the reduction efficiency of ZVI for Cr(VI) due to their inhibitory effects on the adsorption process. These ions compete with Cr(VI) for adsorption sites on the ZVI surface, leading to a decrease in the overall removal efficiency. Additionally, the adsorption of Cr(VI) by ZVI is significantly inhibited by SO42- ions, impacting the effectiveness of the remediation process. The interference of these ions hinders the ability of ZVI to effectively interact with and reduce Cr(VI), thereby reducing the overall efficiency of the treatment system. This highlights the importance of considering the presence of various ions in groundwater when designing remediation strategies involving ZVI.What concentration of hydroxyapatite in bioink is required to induce osteogenic differentiation?

The concentration of hydroxyapatite (HA) in bioink plays a crucial role in inducing osteogenic differentiation. Studies have shown that incorporating HA into bioinks significantly promotes cellular proliferation and osteogenic differentiation of cells. Specifically, the addition of HA particles in alginate-tragacanth composite scaffolds has been found to enhance ALP activity, calcium deposition, and the expression of osteogenic genes, leading to the differentiation of MC3T3 cells into osteoblasts. Moreover, the presence of HA nanowires in HAp/zein composite membranes has been demonstrated to improve adhesion, proliferation, and osteogenic differentiation of bone marrow mesenchymal stem cells. Therefore, to induce osteogenic differentiation effectively, bioinks should contain an appropriate concentration of HA, such as in alginate-tragacanth or HAp/zein composites, as demonstrated in the cited research.Why is organic inhibitor important?

Organic inhibitors are crucial in corrosion protection due to their ability to form protective films on metal surfaces. These inhibitors are preferred for their environmental friendliness and effectiveness across various temperatures. The efficiency of organic inhibitors depends on factors like molecular size, functional groups, and bonding atoms. Studies have shown that organic inhibitors can provide significant corrosion protection for metals like copper and aluminum. The interactions between organic molecules and metal surfaces play a vital role in reducing corrosion rates and enhancing inhibition effectiveness. Small organic molecules have unique electron-donating capacities that contribute to their corrosion inhibitive properties. Overall, organic inhibitors offer a cost-effective and efficient method to prevent corrosion and extend the lifespan of metal structures.What is adulteration in milk?

Adulteration in milk refers to the act of intentionally adding substances to milk for various deceptive purposes. Common adulterants include water, whey proteins, melamine, urea, detergents, starch, hydrogen peroxide, boric acid, and more. This unethical practice poses serious health risks to consumers, leading to diseases and health concerns such as stomach, eye sight, cardiac, renal, and liver issues. Detection methods for milk adulteration have evolved, incorporating techniques like chromatography, mass spectrometry, ELISA, PCR, and innovative approaches like using paper test cards with image colorimetry. The use of advanced technologies such as electrochemical, nanomaterial, and thermal sensing mechanisms, including the ionic polymer metal composite (IPMC), has been explored for detecting impurities in milk.What are the experimental parameters that impact the friction and wear?

Experimental parameters that significantly impact friction and wear include factors like load, sliding velocity, sliding distance, material hardness, and specific wear rate. Studies have shown that these parameters play a crucial role in determining the friction coefficient and wear rate of materials. For instance, in the context of carbon fiber reinforced composites, sliding velocity, sliding distance, and load were found to have a notable influence on specific wear rate and coefficient of friction. Similarly, the experiments conducted on lubricated sliding contacts revealed that material hardness, applied load, and sliding duration affect the friction and wear behavior of the contact. These findings emphasize the importance of carefully controlling these experimental parameters to optimize the tribological performance of materials.What are the potential applications of photocatalysts in removing color from spent wash?

Photocatalysts, such as TiO2, Cu-doped TiO2, and V-doped TiO2, exhibit significant potential in removing color from spent wash. TiO2 photocatalysis has been effective in reducing color and COD in liquid waste, including industrial effluents like batik waste. Cu-doped TiO2 synthesized through a hydrothermal method showed enhanced degradation efficiency of spent wash color under natural solar light, with 1% Cu–TiO2 at 150 °C exhibiting the highest degradation rate. Similarly, V-doped TiO2 demonstrated efficient degradation of spent wash and industrial dyes under natural sunlight, outperforming Degussa P-25 TiO2 in color removal from the waste. These studies highlight the promising applications of photocatalysts in effectively addressing the color removal challenges associated with spent wash in various industrial settings.What is the density metallic paint of in terms of high low or medium?

The density of metallic paint can vary depending on its composition and application. In the provided contexts, different approaches to creating metallic coatings with varying densities are discussed. For instance, a metal film-forming paint aims to achieve high metallic density despite thinness, with a metallic density of 50 mass% or higher. On the other hand, a high solid metal coating is designed to have high solidity and low viscosity, meeting automotive coating standards while doubling the solid content compared to common cellulose acetate butyrate. These examples highlight the range of densities achievable in metallic paints, from high density in thin films to high solidity with low viscosity in high solid coatings.How strong is the X-ray sheet?

The strength of an X-ray sheet can vary based on its composition and structure. One approach to enhancing strength involves using a high-strength sheet with specific material compositions, such as steel with controlled fractions of ferrite, tempered martensite, tempered bainite, and retained austenite. Additionally, X-ray shielding sheets can be designed with reinforcing layers made of polyurethane resin to improve flexibility, surface strength, and adhesiveness. Furthermore, the use of protective layers composed of oxides like SiO2, TiO2, ZrO2, SnO2, Al2O3 can contribute to good moisture resistance and durability in X-ray image conversion sheets. By combining these approaches, X-ray sheets can achieve a balance between flexibility, shielding effectiveness, and overall strength.How to cure polyester resin?

To cure polyester resin, various methods can be employed based on the specific application requirements. One approach involves utilizing a curing accelerator in the resin formulation to facilitate the curing process, as mentioned in the preparation of a polyester resin for outdoor high glass transition temperature coatings. Additionally, the use of a curing agent in combination with unsaturated polyester resin, styrene, and other components can lead to the development of polyester-resin-based cement materials with excellent mechanical properties. Furthermore, the incorporation of carboxyl and hydroxyl functional groups in the polyester resin can enhance the curing reaction with different curing agents, resulting in improved performance under harsh conditions like delayed impact and freezing bending. Overall, the curing of polyester resin involves the use of specific additives and processes tailored to the desired properties of the final product.What are the advantages of using WAAM in manufacturing processes?

Wire Arc Additive Manufacturing (WAAM) offers several advantages in manufacturing processes. WAAM enables the efficient production of large-scale components with reduced lead times, minimal material waste, and cost-effectiveness. It has been successfully utilized in various industries like aerospace, automotive, and shipbuilding. The technology allows for the in-situ manufacturing of complex structures with integrated material-structure-function components, providing solutions for components with surface performance requirements and individual structural features. WAAM also exhibits high efficiency in fabricating components, while the hybridization with Laser Directed Energy Deposition (LDED) enhances precision and surface flatness, resulting in well-fabricated samples with improved mechanical properties and microstructures. Additionally, WAAM materials have shown good yield and ultimate strengths, albeit with slightly lower ductility compared to conventional stainless steel, making them suitable for construction applications.What are the applications of Mg alloys in implants?

Magnesium (Mg) alloys are promising materials for biodegradable temporary implants due to their biodegradability, biocompatibility, and mechanical properties. However, their rapid corrosion rates in physiological environments hinder their widespread use. To address this, various coating methodologies have been explored, such as hydroxyapatite (HA) coatings and hybrid coatings with synthetic and natural polymers. These coatings enhance corrosion resistance, biocompatibility, and mechanical integrity of Mg alloys, making them suitable for biomedical applications. Surface modifications like plasma electrolytic oxidation (PEO) have also been successful in reducing corrosion rates and improving biological properties of Mg implants, promoting cell proliferation and extracellular matrix formation. Overall, the applications of Mg alloys in implants benefit from these coating and modification strategies to overcome corrosion challenges and enhance functionality.