Search or ask a question

What is a good frequency response for amplifier?

Frequency response

Bandwidth (signal processing)

Operational amplifier

Answers from top 6 papers

PDF

Open Access

More filters

Papers (6)	Insight
Journal Article•DOI Ultra-low-noise indium-phosphide MMIC amplifiers for 85-115 GHz J.W. Archer, R. Lai, R. Gough - Show less +2 more 01 Nov 2001-IEEE Transactions on Microwave Theory and Techniques 16 Citations	The overall amplifier performance is comparable to the best ever reported for MMIC amplifiers in this frequency band.
Journal Article•DOI Positive feedback frequency compensation for low-voltage low-power three-stage amplifier J. Ramos, Michiel Steyaert - Show less +1 more 18 Oct 2004-IEEE Transactions on Circuits and Systems I-regular Papers 51 Citations	Both measured frequency and transient step response show that the amplifier is stable.
Proceedings Article•DOI Design for the structural surface material enabling shielding for interference mitigation within the buildings in the unlicensed 2.4ghz ISM band Mesut Kartal, Bora Doken, Ismail Gungor - Show less +2 more 20 Oct 2011 8 Citations	The obtained results show that desired frequency response is achieved.
Journal Article•DOI Frequency selective surface with wideband quasi-elliptic bandpass response Chiara Pelletti, G. Bianconi, Raj Mittra, Zhongxiang Shen - Show less +3 more 15 Aug 2013-Electronics Letters 38 Citations	The measured results for the frequency response show good agreement with those predicted via numerical simulations.
Journal Article•DOI Single-Sideband Transmission by Envelope Elimination and Restoration Leonard R. Kahn 01 Jul 1952 710 Citations	Experimental results show performance equal to or better than conventional linear radio-frequency amplifier practices.
Journal Article•DOI Relationship between frequency response and settling time of operational amplifiers B.Y.T. Kamath, Robert G. Meyer, Paul R. Gray - Show less +2 more 01 Dec 1974-IEEE Journal of Solid-state Circuits 300 Citations	Finally it is shown that simple analytical formulas can be used to estimate the influence of frequency doublets on amplifier settling time.

My columns

Related Questions

How many watts is a good amplifier?10 answers

What is a good wattage for an amplifier?10 answers

What is the frequency of audio amplifier?8 answers

Which amplifier brand is best?9 answers

Which audio amplifier is best?9 answers

Which transistor is best for amplifier?9 answers

See what other people are reading

Doherty power amplifier 3.3 - 3,8 GHz

A Doherty power amplifier (DPA) operating in the 3.3 - 3.8 GHz range is not explicitly discussed in the provided contexts. However, the contexts do provide valuable insights into DPAs operating at higher frequencies. For instance, a 2.4 GHz DPA based on voltage combining in 22 nm CMOS achieved high efficiency and linearity, with a peak power added efficiency (PAE) of 42.5% and a PAE of 25.2% at 6 dB back-off power. Additionally, a millimeter-wave (mmWave) three-way Doherty output network was implemented at 38 GHz for 5G applications, achieving power-added efficiency (PAE) of 13.7%/11.0% at 9.5-/11.5-dB back-off. While specific details for 3.3 - 3.8 GHz are not provided, these examples showcase the efficiency and performance optimization strategies that can be applied to DPAs in different frequency ranges.Is there a paper with an nmr spectrum of pae?

Yes, there is a paper that discusses the structural characterization of common Polyamic Acid (PAA) polymers, including their synthesis and analysis using 1D and 2D NMR techniques, supported by ATR-FTIR methods. The study highlights the importance of the choice of diamine and dianhydride sources, as well as the solvent, in determining the cis-/trans-binding of monomers, average molecular weight, and intramolecular interactions in PAA polymers. This research provides valuable insights into the structural properties of PAA, which is crucial for further modifications and applications in various fields such as sensors, flexible electronics, drug delivery, and food packaging. The NMR and FTIR analyses offer a comprehensive understanding of the chemical composition and characteristics of PAA polymers, aiding in their optimization for specific uses.What are the dynamic properties of cables used in network bridges?

The dynamic properties of cables in network bridges are crucial for their design and operation. Studies have focused on factors like cable frequency equations, boundary conditions, stiffness, and damping to understand cable behavior. Analytical models have been developed to investigate the impact of cross-tie stiffness, damping, and main cable properties on network responses, aiding in enhancing stiffness and energy dissipation capacity. Additionally, research has delved into the in-plane and out-of-plane transverse vibrations of cable-stayed bridges, highlighting the influences of mass ratio, stiffness ratio, and cable sag on vibration modes. Seismic behavior studies have emphasized the importance of understanding nonlinearity sources like cable sag and axial-force-bending moment interactions for effective seismic response analysis in cable-stayed bridges.How does different electric guitar model effect live performances?

Different electric guitar models impact live performances in various ways. For instance, an electric guitar effect assembly simplifies setup by connecting multiple effects in parallel with a single power source, reducing clutter on stage. On the other hand, guitars with decorative lamps enhance visual appeal and stage presence, creating a captivating atmosphere for performers and audiences. Wireless transmission systems in electric guitars allow for freedom of movement on stage, with studies focusing on antenna design and human body interaction to optimize performance. Additionally, electric guitars with built-in loudspeaker amplifiers and receivers amplify sound and enhance the on-stage atmosphere, offering practicality and convenience for performers. Moreover, multifunctional electric guitars with cordless transmitting devices expand the range of movement on stage, providing a scientific and user-friendly design for electric guitar enthusiasts.What are the most commonly used biomedical diagnose instrumentation?

The most commonly used biomedical diagnostic instrumentation includes a wide range of devices such as medical imaging equipment, diagnostic tools, therapeutic devices, life support equipment, and medical laboratory instruments. These instruments are crucial for diagnosing and treating various diseases and conditions. Biomedical instrumentation involves the use of sensors, transducers, amplifiers, and filters to monitor and analyze biological signals. Specific examples of biomedical diagnostic instruments include those used for measuring biopotentials like ECG, EEG, EMG, and EGG, as well as devices for skin conductance, pulse oximetry, and wearable systems. Additionally, specialized diagnostic instruments like the medical diagnostic instrument for oral cavity examination have been developed to aid in specific medical assessments. These diverse tools collectively contribute to the field of biomedical instrumentation, enabling accurate diagnosis and effective treatment of various health conditions.What are the five easiest ways to increase sleep quality?

To increase sleep quality, five easy ways can be implemented. Firstly, utilizing a sleep quality improving device that generates electromagnetic waves to influence brain cells positively. Secondly, following a motion monitoring method that constructs an exercise plan based on daily activity levels to optimize sleep intervals. Thirdly, incorporating a traditional Chinese medicine recipe or traditional Chinese medicine to enhance sleep quality naturally and effectively. Fourthly, using a smart home device that monitors physiological parameters and adjusts head postures during sleep to improve sleep quality. Lastly, engaging in regular exercise according to a personalized plan can help relieve stress and enhance sleep quality. By combining these methods, individuals can easily enhance their sleep quality for overall well-being.What are the most common types of WLAN applications used in corporate environments?

The most common types of WLAN applications used in corporate environments include fast and efficient file browsing through HTTP over LAN connections, real-time traffic transmission for various network applications with specific requirements like packet bandwidth and jitter, and communication between access points and smart devices at 2.45 GHz frequency for data transfer. Additionally, WLAN technology is utilized for supporting communication in industrial environments, particularly in scenarios where critical safety requirements or tight timing constraints are not present, resembling the performance achievable with fieldbuses. WLAN applications in corporate settings often involve enhancing data communication speed, improving area coverage, and managing wireless resources efficiently to ensure a seamless user experience for different network applications.How do sound effects contribute to the realism of a simulator?

Sound effects play a crucial role in enhancing the realism of simulators by improving the sense of presence, immersion, and overall user experience. By utilizing advanced techniques such as wave-based sound propagation, simulators can accurately model important sound effects like diffraction, interference, and directivity, which are essential for creating a lifelike environment. Incorporating realistic sound effects can also lead to performance improvements without compromising the perception of visual realism, as demonstrated in studies focusing on virtual environments for surgical training. Additionally, simulators like the model airplane engine sound effect simulator utilize sound to emit engine simulation sounds, enhancing the overall experience and realism of the simulation. Overall, sound effects contribute significantly to the authenticity and effectiveness of simulators by providing spatial cues, high-fidelity audio, and a more immersive experience.What are the trash can?

Trash cans come in various innovative designs to cater to different needs. These include trash cans with intelligent identification and classification systems, sensing flip lids with adjustable sensing distances, student classroom-specific trash can devices, trash cans with adjustable use space, and trash cans with fragrant oil dispensers. The trash can with intelligent identification and classification features a range of components like pressure sensors, cameras, robot arms, and sorting mechanisms. On the other hand, the sensing flip lid trash can allows users to set the sensing distance and employs digital comparison modes for stability. Additionally, a student classroom trash can device offers a novel structure with hooks and connecting rods for easy use. Trash cans with adjustable use space utilize folding tubes and adjustable mechanisms for enhanced practicality. Lastly, trash cans with fragrant oil dispensers release essential oils to repel insects and mask odors.How effective are vibration damping tools in reducing noise levels in industrial settings?

Vibration damping tools play a crucial role in reducing noise levels in industrial settings. Various studies have highlighted the significance of these tools in different applications. For instance, the use of semiactive-viscous dampers has shown over 48% attenuation of residual vibrations compared to conventional concrete foundations. Additionally, custom active dampers have been developed to suppress vibrations in real-time, leading to a significant reduction in dominant structural modes in industrial robots subjected to hammer tests and base vibrations. Moreover, the manufacturing technology of acoustic protection tools, such as resilient mounts and sonar coatings, can impact their performance by affecting the dynamic shear modulus reduction of the material used in production. Overall, vibration damping tools are effective in reducing noise levels by mitigating vibrations and enhancing the overall performance of industrial equipment.What is optimal frequency?

The optimal frequency refers to the frequency at which a system achieves maximum efficiency or performance. In the context of wireless power transmission systems, determining the optimal frequency is crucial for maximizing power transfer efficiency. Various methods exist to search for the optimal frequency, such as through frequency measurement processes and criteria combining execution time and energy consumption. In millimeter wave-based MIMO communication systems, optimal beamforming designs may involve semi-unitary frequency-flat precoding and combining to achieve near-digital spectral efficiencies with minimal implementation costs. Factors influencing the selection of the optimal frequency include power transfer optimization, considerations of power loss due to Joule heating and material loss, skin effects, magnetic reluctance, core characteristics, and industry standards for wireless power transfer technology.