scispace - formally typeset
Search or ask a question

What is the best ceramic coated cast iron skillet? 

Microstructure
Ceramic
Machining
Cast iron
Graphite

Answers from top 8 papers

More filters
Papers (8)Insight
Journal Article•DOI
Wear behavior of Al2O3/Ti(C,N)/SiC new ceramic tool material when machining tool steel and cast iron
Chong Hai Xu, Y.M. Feng, R.B. Zhang, S.K. Zhao, X. Xiao, G.T. Yu 
01 Jun 2009-Journal of Materials Processing Technology
25 Citations
The ceramic tool material has good wear resistance when machining grey cast iron with uniform flank wear.
Journal Article•DOI
A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool
Deba Kumar Sarma, Uday S. Dixit 
23 Jul 2007-Journal of Materials Processing Technology
55 Citations
Thus, air-cooled turning of grey cast iron with mixed oxide ceramic tools offers a promising environment-friendly option.
Book Chapter•DOI
Advanced ceramic materials for metal cutting
Tom Troczynski, Dipanjoy Ghosh, S. Das Gupta, James K. Jacobs 
01 Jan 1989
11 Citations
It is shown that advanced ceramic cutting tools outperform carbides in machining of cast iron and nickel alloys.
Journal Article•DOI
Physical properties and cutting performance of silicon nitride ceramic
Mikio Fukuhara, Fukazawa Kenji, Akira Fukawa 
01 Apr 1985-Wear
90 Citations
This new ceramic cutting tool shows superior performance in cutting cast irons at high speeds (10–16.75 m s−1 (600–1000 m min−1)) and rates (about 1.0 mm rev−1), where conventional tools cannot be used.
Journal Article•DOI
Preparation of in situ (Fe,Cr)7C3/Fe composite coating by centrifugal casting
Libin Niu, Yun Hua Xu, Hong Wu, W Wang 
01 Sep 2011-Surface Engineering
13 Citations
Under the condition of dry sliding with loads, the composite coating offers virtually a unique wear resistant behaviour compared with that of unreinforced ductile cast iron material.
Journal Article•DOI
Cast sinter technique for producing iron base surface composites
Yisan Wang, Xinyuan Zhang, Guangting Zeng, Fengchun Li 
01 Oct 2000-Materials & Design
27 Citations
The cast sinter technique provides the opportunity of producing near-net-shape final components with a metal–ceramic surface composite layer during casting.
Journal Article•DOI
Microstructure and friction properties of plasma sprayed Al–Si alloyed cast iron coatings
M.F. Morks, Yoshiki Tsunekawa, Narges F. Fahim, Masahiro Okumiya 
10 Mar 2006-Materials Chemistry and Physics
16 Citations
The results indicated that sprayed cast iron coatings of high Al and Si elements show good friction and wear resistance mainly due to the formation of graphite in the coating.
Journal Article•DOI
In-situ surface hardening of cast iron by surface layer metallurgy
Sebastian Friedhelm Fischer, Stefan Muschna, Andreas Bührig-Polaczek, Matthias Bünck 
06 Oct 2014-Materials Science and Engineering A-structural Materials Properties Microstructure and Processing
16 Citations
Analyses of the samples׳ core reveal a typical cast iron microstructure which leads to the conclusion that the coating mainly affects the castings׳ surface.

Related Questions

What is the material of ceramic coating ?4 answersCeramic coatings are composed of various materials such as silicon carbide, tungsten carbide, chrome oxide, titanium oxide, alumina-titania oxide, alumina oxide, zirconium oxide, magnesium zirconium oxide, zinc oxide, copper oxide, bioactive glass, silica sol resin, stabilizer, acrylate resin, toner, titanium dioxide, phosphorus oxide, magnesium oxide, kaolin, albite, potassium feldspar, zirconium oxide, nickel oxide, cobaltous oxide, and water.
How do you care for ceramic coating pans?9 answers
What is the best brand of ceramic coating for cars?8 answers
What is the best ceramic car wax to use?10 answers
What is the best ceramic flat iron for fine hair?7 answers
Whats the best ceramic tile cleaner?7 answers

See what other people are reading

How to make a ceramic resin?
5 answers
To make a ceramic resin, several methods can be employed based on the desired application. One approach involves preparing a ceramic resin by reacting inorganic oxide sol with alkoxy silane under acidic conditions, where the inorganic oxide sol includes titanium oxide sol. Another method includes creating a ceramic resin composite material by dispersing thermally treated ceramic powder in a resin matrix, enhancing dielectric properties and ease of dispersion. Additionally, a ceramic/resin composite powder can be produced by mixing phenolic resin with ceramic particles, concentrating the slurry, and drying the resulting composite material, suitable for applications like selective laser sintering formation of ceramic products. Furthermore, a ceramic resin for 3D printing can be formulated using nano ceramic packing and light-cured resin to enhance mechanical properties of ceramic shell membrane materials.How wood deformations under load affect the structure?
5 answers
Wood deformations under load significantly impact the structure by influencing properties such as stiffness, strength, and long-term behavior. Deformation behaviors of wooden composites with advanced engineering materials like glass fiber, carbon fiber, and polyurethane resin were studied, showing a 17.3% increase in bending strength with the addition of glass fiber. Creep and relaxation phenomena in wood can lead to excessive deformation and instability issues, especially due to changes in mechanical properties caused by moisture content. Semi-rigid connections in timber portal frames exhibit increasing deformations over time under constant load, highlighting the non-linear nature of deformations and the significant influence of creep on connection stiffness. Wood modification through pressing alters its structure and deformability, affecting stiffness, modulus of elasticity, and Poisson's ratio. Factors like modulus of elasticity, density, and number of annual rings per cm significantly influence timber beam behavior under long-term load in natural climatic conditions.What causes or contributes to the formation of oxygen vacancies in TiO2 in CO2 hidrogenatiion?
5 answers
The formation of oxygen vacancies in TiO2 during CO2 hydrogenation can be attributed to various factors. One significant contributor is the application of an electric field, which promotes the creation of oxygen vacancies in TiO2 films, leading to enhanced photocatalytic efficiency. Additionally, interfacial strain induced by coating can energetically favor the generation of oxygen vacancies in TiO2, resulting in improved material properties and performance. Moreover, the reduction of Rhodium salt by electrons in an electric field during catalyst preparation can lead to the production of oxygen vacancies and Ti3+ on the catalyst surface, enhancing the interaction between Rh and TiO2 for improved CO hydrogenation to ethanol. Furthermore, defect engineering, particularly the presence of oxygen vacancies, plays a crucial role in enhancing the photocatalytic activity of TiO2, especially when combined with specific crystal facets.In which temperature bearing bronze starts to soften?
4 answers
Bronze can start to soften at various temperatures depending on the specific type of bronze alloy. For instance, beryllium bronzes can undergo softening due to reverse solution when heated to 500°C. In contrast, the high-temperature-resisting ferro-bronze demonstrates good high-temperature-softening resistance, maintaining its hardness above 130 HV even after being held at 500°C for 5 minutes. Additionally, the QAl10-4-4 aluminum bronze alloy experiences changes in hardness during aging treatments at different temperatures, with hardness decreasing as certain phases decompose. Therefore, the softening temperature of bronze alloys can vary based on their composition and treatment processes.How to decrease electrical resistance in concrete?
5 answers
To decrease electrical resistance in concrete, various methods can be employed based on different additives and mix proportions. Adding fibers like steel, glass, or nylon to concrete can significantly reduce electrical resistivity, affecting its insulating properties. Incorporating carbon-based conductive recycled additions such as recycled carbon fibers or gasification char can also decrease electrical impedance in concrete, enhancing self-sensing properties without affecting compressive strength significantly. Additionally, utilizing carbon nanofibers in concrete has shown promising results, enhancing both mechanical strength and electrical properties, making it suitable for applications requiring strain monitoring and self-health assessment of concrete structures. Understanding the impact of exposure conditions, such as moisture, temperature, and pressure loads, on resistivity can further guide strategies to mitigate electrical resistance in concrete.How does the temperature affect the performance of Carnot batteries?
5 answers
The temperature plays a crucial role in influencing the performance of Carnot batteries. Different studies have highlighted this impact. For instance, a study on a Carnot battery utilizing water as the working fluid found that optimizing parameters like adiabatic efficiency and terminal temperature difference can lead to a maximum round-trip efficiency of 0.438. Another research focused on a high-temperature thermal storage system using phase change material and graphite emphasized the importance of temperature in determining the cost-effectiveness of the system. Additionally, the establishment of theoretical models for Carnot batteries with various working fluid pairs demonstrated that the thermal storage temperature significantly affects the levelized cost of storage, with lower temperatures leading to more economical performance. These findings collectively underscore the critical role of temperature in shaping the efficiency and cost-effectiveness of Carnot batteries.Is PMMA an engineering polymer?
4 answers
Yes, PMMA (Poly(methyl methacrylate)) is indeed considered an engineering polymer due to its extensive use in various applications. PMMA is valued for its good transparency, chemical stability, and electrical insulation, making it a versatile material for applications in aviation, architecture, medical treatment, and optical instruments. Additionally, PMMA is commonly utilized in the manufacture of lenses for optical applications, showcasing properties like high hardness, strength, ductility, and fracture toughness. Furthermore, PMMA is recognized for its exceptional optical transparency, mechanical properties, chemical resistance, and electrical properties, making it a popular choice in optoelectronic instruments, electronic applications, and various other fields. PMMA's optical properties and cost-effectiveness also make it a preferred polymer for optical applications, further solidifying its status as an engineering polymer.What are the current technological applications of cuprate superconductors?
4 answers
Cuprate superconductors, known for their high-temperature superconductivity, find applications in various technological fields. They are crucial for applications in medical imagery, motors, generators, power cables, levitation trains, and fusion magnets. Additionally, advancements in rare-earth, cuprate-based bulk superconductors have led to their use in hybrid trapped field magnetic lensing, high-performance magnetic shields, large-gradient magnetic separation, and bench-top NMR/MRI ring-shaped stacks. The crystal structures and properties of cuprate superconductors like YBCO, Bi-2212, and Bi-2223 are essential for their applications, including creating flux pinning sites to increase critical current density. Moreover, the discovery of iron-based high-temperature superconductors has expanded the range of applications for cuprate superconductors.What is the Interplay between anisotropy and heterogeneity in material behavior?
5 answers
The interplay between anisotropy and heterogeneity in material behavior is a complex phenomenon influenced by various factors. Anisotropy, affected by crystal orientation and processing parameters, is present in heterogeneous materials due to individual phase properties and microstructural configuration. Existing anisotropy measures have been re-interpreted to consider effective elastic properties in heterogeneous materials, highlighting the role of constituent volume fractions and phase characteristics in determining anisotropy levels. In materials like calendered nonwovens, anisotropy is influenced by the fibrous matrix, bond-areas, and interface regions, showcasing the impact of material heterogeneity on anisotropic behavior. Understanding this interplay is crucial for predicting and controlling material responses in various applications.What are theapplications of Molybdenum alloys in automotive industry?
5 answers
Molybdenum alloys find significant applications in the automotive industry due to their beneficial properties. These alloys, particularly in iron-based castings, enhance strength, hardness, and toughness, making them ideal for structural components. Additionally, iron-molybdenum sintered alloys, when heat-treated, exhibit improved tensile strength and wear resistance, making them suitable for structural parts in vehicles. The use of molybdenum in automotive components like gears and dies provides corrosion resistance and hardness, crucial for harsh working environments encountered in the industry. Overall, molybdenum alloys play a vital role in enhancing the performance and durability of automotive parts, ensuring reliability and longevity in demanding operational conditions.What are the optimal laser cutting parameters for achieving precise and accurate microstructures in PDMS?
4 answers
Optimal laser cutting parameters for precise microstructures in PDMS involve key factors. The use of an Adaptive Neuro-Fuzzy Inference System (ANFIS) aids in optimizing lamp current, pulse width, and frequency to enhance groove depth and recast layer height. Additionally, regulating heat generation and diffusion processes at specific temperatures can achieve a minimum groove width of 67.1 ± 1.7 μm and a heat-affected zone of 6.8 ± 0.8 μm, improving cutting quality. Simulation models incorporating Bilinear Kinematic and Mooney-Rivlin models help optimize laser power and cutting speed for micro-channel width and depth in PDMS chips. Laser cutting can also impact the stiffness of PDMS, with Young's modulus increasing by 9% to 31% depending on the base to curing agent ratio.