scispace - formally typeset
Search or ask a question

Answers from top 10 papers

More filters
Papers (10)Insight
In the end, it gives the application of catalytic combustion sensor using in diesel vapor detection and alarm system in engine room.
The prototype catalytic convertor eliminates most of the hydrocarbon species in the exhaust under both combustion modes, especially with a lean mixture.
Open accessJournal ArticleDOI
18 Jul 2013-Energies
22 Citations
At medium to high loads the engine is operated stoichiometrically, which enables the use of a cost-efficient three-way catalytic converter.
A catalytic converter is required to reduce the regulated and unregulated emissions when hydrous ethanol is used for a small SI engine generator set.
Open accessJournal ArticleDOI
He Ling, YU Xiu-Min, LI Guo-Liang, XU Nan 
01 Jan 2012-Energy Procedia
8 Citations
Experimental results show that exhaust mass flows, inlet signal amplitudes and periods have important influence on engine emissions and oxygen storage capacity of Ceria for the three-way catalytic converter with CeO2 catalyst in the washcoat.
This project work presents a new catalytic converter to be used for compressed ignition engine.
The high-H+ contents are best explained by the reduction of Cr4+ to Cr2+.
The most likely candidate for the catalytic base is His225.
These results provide the first direct evidence of the presence of Cr4 metastable phase during methane combustion over La–Cr–O catalysts.
The low cost factor, effective catalysis of exhaust gas and versatile application of this catalytic convertor has made this unique invention.

Related Questions

How much percentage of air pollutants emissions reduces by using catalytic converter on vehicles exhaust?3 answersThe use of catalytic converters on vehicle exhaust can reduce air pollutant emissions by a significant percentage. Studies have shown that the maximum reduction in CO2 emissions can be up to 42.85%. The reduction in CO emissions can reach up to 83%. Additionally, the use of catalytic converters can lead to a reduction in HC emissions by up to 18.4%. Another study found that the highest reduction in CO levels was achieved at an engine speed of 2000 rpm, with a reduction of 5.23. The highest percentage reduction in HC levels was observed at an engine speed of 1000 rpm, with a reduction of 645%. These findings demonstrate the effectiveness of catalytic converters in reducing air pollutant emissions from vehicle exhaust.
What is the role of catalyst converters in the reduction of greenhouse gas emissions?5 answersCatalytic converters play a crucial role in the reduction of greenhouse gas emissions. They are used to convert carbon dioxide (CO2) into chemicals that can serve as energy vectors in a carbon-based energy cycle. These converters utilize redox catalysts with high turnover number, selectivity, and efficiency to overcome the stability of CO2. The reduction of CO2 requires catalysts in various reaction modes, such as electrocatalytic, photoelectrocatalytic, or photocatalytic. Mechanistic studies are important for understanding the detailed mechanisms of CO2 reduction and guiding catalyst design. The catalytic conversion of CO2 into clean fuel and value-added chemicals is a promising approach to address greenhouse gas emissions and energy shortage. Catalysis will play a critical role in reducing the flow of greenhouse gases into the atmosphere, and various catalytic processes, such as water electrolysis, steam reforming, and biomass waste transformation, are being explored for this purpose.
Does the Mercedes CLA diesel engine have a catalytic converter?10 answers
Is Dicor catalytic converter good for Tata Safari?10 answers
What is the resources and limitations of catalytic converter?10 answers
Which Crash Guard should be used in bs6 version of Royal Enfield which will not damage the catalytic converter?10 answers

See what other people are reading

How is stainless steel better than aluminium for the automotive industry?
4 answers
Stainless steel offers significant advantages over aluminum in the automotive industry. Stainless steel is known for its excellent corrosion resistance, weldability, extension strength, tensile strength, and ductility, making it a preferred choice for vehicle bodies and engine components. The use of stainless steel in automotive applications helps in reducing the weight of vehicles, contributing to energy conservation and emission reduction. Additionally, stainless steel provides good anti-oxidization performance, crucial for automotive engine parts. With mounting energy crisis and the need for higher corrosion resistance in exhaust systems, stainless steel's properties make it a superior choice over aluminum for ensuring durability, safety, and compliance with stringent emission laws in the automotive sector.
What are the production methods of Hydrogenated Vegetable Oil?
5 answers
Hydrogenated vegetable oil can be produced through various methods. One approach involves utilizing an activated hydrogenation catalyst and high shear processes to enhance the reaction efficiency and reduce trans fatty acid content. Another method includes a multi-stage hydrogenation process, where vegetable components are combined with diesel fractions and subjected to hydroprocessing, hydrodeoxygenation, and catalytic hydrodewaxing to improve low-temperature properties of the resulting diesel fuel. Additionally, a production method for vegetable oil extraction from non-food oilseeds involves steps such as extraction with water, alcohol, and saturated hydrocarbons or pressing to obtain the oil efficiently while preserving valuable components. These methods offer ways to produce hydrogenated vegetable oil with improved characteristics and commercial viability.
What is traffic related air pollution?
4 answers
Traffic-related air pollution (TRAP) refers to the pollution generated by vehicles on roads and highways. It includes emissions such as particulate matter (PM), nitrogen dioxide (NO2), volatile organic compounds (VOCs), and carbon monoxide (CO). TRAP is a significant contributor to urban pollution and poses serious health risks, leading to respiratory diseases like chronic obstructive pulmonary disease (COPD). Studies have shown that TRAP exposure can result in respiratory symptoms, lung function impairment, inflammation, oxidative stress, and energy metabolism disorders. The composition of TRAP varies based on factors like vehicle types (light duty vehicles, heavy-duty diesel vehicles), fuel types (gasoline, diesel), and traffic conditions, with higher concentrations of pollutants observed near roadsides and tunnels compared to background levels.
What are the best pyrolysis oil obtained from plastic waste to obtain diesel?
4 answers
The most promising pyrolysis oils derived from plastic waste for obtaining diesel are Waste Plastic Diesel (WPD) and Plastic-Made Diesel (PMD). WPD exhibits higher naphtha and heavy oil contents compared to commercial diesel, making it a viable alternative fuel for internal combustion engines. On the other hand, PMD, produced from a mixture of high-density polyethylene, polypropylene, and polystyrene, shows enhanced engine performance and reduced emissions, with PMD20 displaying notable improvements in brake power, torque, thermal efficiency, and emissions reduction compared to ultra-low sulfur diesel. Both WPD and PMD offer significant potential in terms of fuel efficiency, reduced environmental impact, and effective waste plastic management.
What are the environmental impacts of using green diesel as a fuel alternative compared to traditional diesel?
4 answers
Green diesel, a biofuel derived from catalytic deoxygenation of biomasses, offers significant environmental benefits compared to traditional diesel. It exhibits superior physical-chemical properties and reduces greenhouse gas emissions effectively. Studies show that using renewable hydrotreated vegetable oil (HVO) diesel, a type of green diesel, improves catalyst performance in reducing hydrocarbon and carbon monoxide emissions, enhancing air quality. Additionally, green diesel production from waste biomasses contributes to waste reduction and efficient resource utilization, further minimizing environmental impact. Overall, green diesel presents a promising alternative to traditional diesel, offering reduced emissions, improved air quality, and sustainable resource utilization, aligning with the global shift towards greener energy solutions.
How does the use of public transportation affect air pollution in urban areas?
4 answers
The use of public transportation in urban areas has a significant impact on air pollution levels. Studies from Rio de Janeiro, China, Addis Ababa, and urban areas in generalhighlight that public transportation plays a crucial role in reducing emissions and improving air quality. Implementing efficient public transport systems leads to shorter bus routes, decreased fuel consumption, and lower emissions of pollutants like NOx, CO, PM10, and PM2.5. Additionally, investing in subway networks can result in a substantial reduction in air pollution, especially in cities with lower population density and higher income levels. Encouraging the use of zero-emission vehicles and promoting green development are recommended strategies to further mitigate transport-related air pollutants in urban areas. Efforts to electrify bus fleets can significantly reduce CO2 and other air pollutant emissions, showcasing the potential of public transportation in combating urban air pollution.
What is the objective of farm tractor?
4 answers
The objective of a farm tractor is multifaceted, aiming to enhance agricultural activities while considering efficiency, sustainability, and performance. Farm tractors serve as essential vehicles for various tasks like tillage, sowing, and transportation, converting stored energy into mechanical energy to perform useful work. Manufacturers focus on improving technical subsystems like engines and hitches to optimize traction-effort and efficiency, reflecting an evolution towards an industrially-mature product with an optimized configuration. Additionally, studies investigate performance characteristics during ploughing and sowing, emphasizing factors like weight distribution and traveling speed to enhance tractive efficiency, fuel consumption, and power requirements. Innovations in tractor design, such as electric traction systems, aim to develop sustainable and non-polluting solutions for the agricultural sector.
What are the different %-vol. of biodiesel?
4 answers
The different %-vol. of biodiesel mentioned in the provided contexts are as follows: 5%-35% of biodiesel in a biodiesel compound fuel mixture, up to 7 vol% of FAME biodiesel and up to 30 vol% of HVO biodiesel in biodiesel/petroleum diesel blends, 20% proportion of various biodiesel blends (Jatropha, Pongamia, Mahua, Annona, Nerium) in diesel engines, and biodiesel percentages ranging from 1.5% to 12.0% in biodiesel/diesel blends for analytical purposes. Additionally, a study involved the preparation of diesel-biodiesel blends of B7, B20, B30, B40, and B100. These varying percentages reflect the versatility and adaptability of biodiesel in different fuel mixtures and applications.
What is tractor?
4 answers
A tractor is a versatile farm vehicle that converts stored chemical energy into mechanical energy to perform various agricultural tasks. Tractors can feature advanced systems like automatic direction reversal controls, coordinated braking, clutch engagement, and gear selection based on objective and subjective parameters set by the driver. Agricultural tractors can operate working machines through rotary clutches, allowing for smooth work progress by controlling driving force transmission to the wheels. In industrial settings, tractors can be designed to move semitrailers or trailers efficiently, utilizing electric traction motors connected to the rear axle with kinematic connection means to maintain motion transmission despite varying positions. Tractors play a crucial role in modern agriculture and industrial logistics, enhancing productivity and efficiency in various operations.
How does FESM imaging with EDX compare to other characterization techniques for calcined banana peel ash catalysts?
5 answers
Field emission scanning electron microscopy (FESEM) imaging with energy-dispersive X-ray spectrometry (EDX) is crucial for characterizing calcined banana peel ash catalysts due to its ability to provide high-resolution surface observation and elemental analysis of catalyst particles down to a few tens of nanometers. FESEM allows for the visualization of surface topography and irregularly shaped particle structures, while EDX enables elemental analysis of the catalyst composition. This technique is particularly beneficial for catalyst systems like Ag dispersed fine particles, ensuring optimum distribution and morphology of the catalyst particles. By comparing different imaging methods like secondary electron (SE), backscattered electron (BSE), and transmitted electron (TE) detection, FESEM/EDX can offer comprehensive insights into the morphology and composition of the catalyst particles, making it a valuable tool for characterizing calcined banana peel ash catalysts.
How to reduce pollution environment?
4 answers
To reduce environmental pollution, various methods can be employed. Utilizing environmental biotechnology tools can aid in purifying air, decreasing water pollution, and managing waste, ultimately making the environment pollution-free. Implementing methods like washing exhaust gases with water, treating them with alkali, and passing them through a microbial reactor for desulfurization and denitrification can effectively reduce pollutants in exhaust gases, leading to cleaner emissions. Devices equipped with granulators, tail gas treatment devices, baffles, quartz wool, and activated carbon layers can filter out wood flour and dust, ensuring clean exhaust gases. Nanomaterials can play a crucial role in eliminating organic and inorganic pollutants through adsorption and photocatalytic reduction, offering a sustainable solution for pollution management. Employing denitrification and nitration microbes in contact with polluted atmosphere can also aid in reducing nitrogen oxides, ammonia, fine dust, and CO2 levels in the air.