scispace - formally typeset
Search or ask a question

What is the meaning of voltage fluctuation in washing machine? 

Limit (music)
Angular displacement
Experimental system
Voltage
Energy (signal processing)

Answers from top 9 papers

More filters
Papers (9)Insight
Proceedings Article•DOI
Determining the mass and angular position of the unbalanced load in horizontal washing machines
Ahmet Yörükoğlu, Erdinc Altug 
14 Jul 2009
16 Citations
The research on unbalanced load increase the performance of the washing machine and in addition to this, this research can be used to eliminate unbalanced load in future studies.
Proceedings Article•DOI
Diagnostics of induction machines using the zero sequence voltage
Pablo Garcia, Fernando Briz, M.W. Degner, Alberto B. Diez 
01 Nov 2004
38 Citations
The measured zero sequence voltage is shown to contain reliable information on the condition of the machine, with little influence from the operating point or imbalances in the phase voltages.
Proceedings Article•DOI
Increase of Diagnostic Capabilities of Voltage Fluctuation Indicies
Piotr Kuwalek
01 Jul 2020
5 Citations
The recreation of voltage changes allows recalculation of voltage fluctuation indices to other parameters describing voltage variations, and allows determination of parameters associated with sources of voltage fluctuations.
Open access•Journal Article•DOI
Modified PDMS packaging of sensory e-textile circuit microsystems for improved robustness with washing
Olivia Ojuroye, Russel Torah, Steve Beeby 
18 May 2019-Microsystem Technologies-micro-and Nanosystems-information Storage and Processing Systems
21 Citations
Results show the washing spin speed is a crucial factor with washing cycle duration having minimal impact when determining circuit functionality survival.
Open access•Journal Article•DOI
Optimized High Frequency Signal Injection Based Permanent Magnet Synchronous Motor Rotor Position Estimation Applied to Washing Machines
Olfa Bel Hadj Brahim Kechiche, Houda Ben Attia Sethom, Hafedh Sammoud, Ilhem Slama Belkhodja 
29 Sep 2011-American Journal of Engineering and Applied Sciences
29 Citations
This study presents an improved high frequency voltage injection based sensor less control for Permanent Magnet Synchronous Motor (PMSM) designed for washing machines.
Proceedings Article•DOI
Determining the mass and angular position of the unbalanced load in horizontal washing machines
Ahmet Yörükoğlu, Erdinc Altug 
14 Jul 2009
16 Citations
Unbalanced load in washing machines limit the performance, and therefore accurate estimation of unbalanced loads, including their magnitudes and locations in washing drum, is required.
Proceedings Article•DOI
Sensorless Direct Flux and Torque Control for Direct Drive washing machine applications
Radu Bojoi, B. He, F. Rosa, F. Pegoraro 
01 Nov 2011
16 Citations
This solution provides very good performance under current and voltage limitations and represents a viable alternative for washing machine applications.
Journal Article•DOI
Energy and water savings potential in automatic laundry washing processes
Christiane Pakula, Rainer Stamminger 
01 Apr 2015-Energy Efficiency
32 Citations
In total, savings of more than 12 TWh of electricity and about 870 million m3 of water could be achieved every year by increasing the water and energy efficiency of washing machines and changing the consumer behavior towards better use of the washing machine capacity and the frequent use of low wash temperatures.
Proceedings Article•DOI
Performance investigation of extended Kalman filter based observer for PMSM using in washing machine applications
Handan Nak, Mehmet Onur Gulbahce, Metin Gokasan, Ali Fuat Ergene 
01 Nov 2015
10 Citations
Simulation results illustrate that the proposed system is quite effective for washing machine applications and robust against variations of motor parameters.

Related Questions

Can voltage fluctuations affect washing machine?8 answers
Can washing machine run on low voltage?7 answers
Can we charge your phone when there is voltage fluctuation?5 answers
Can we run washing machine on low voltage?7 answers
How can you save home appliances from voltage fluctuation?10 answers
How much voltage required for IFB washing machine?8 answers

See what other people are reading

Active base isolation systems with actuators?
5 answers
Active base isolation systems utilize actuators to counteract vibrations and provide effective vibration control. These systems can employ various types of actuators, such as electromagnetic actuators, electrodynamic drives, and magnetic actuators. Actuators in these systems are designed to reduce noise, compensate for vibroactive forces, and actively isolate neighboring electrodes in multi-electrode plasma actuators. By incorporating different types of actuators, these systems can achieve dynamic control over vibrations, allowing for both passive isolation and active vibration control when needed. The combination of actuators with elastomeric mounts can amplify or attenuate the overall restoring force, providing the system with the flexibility to behave passively or be actively controlled based on the operating conditions.Active base isolation systems with hydrualic actuators?
5 answers
Active base isolation systems with hydraulic actuators have been proposed as effective solutions for mitigating structural responses to seismic events. These systems combine passive isolation bearings with actively controlled hydraulic actuators to reduce base displacements while maintaining superstructure responses similar to passive systems. The use of hydraulic actuators allows for smooth and limited control forces, addressing the limitations of passive systems. Additionally, the ability to amplify or attenuate the overall restoring force based on operating conditions provides a versatile approach to vibration isolation. Furthermore, the integration of hydraulic actuators in active vibration isolation devices has shown promise in aerospace engineering, offering compact solutions with inertial actuators to overcome installation limitations.How does green computing impact the energy consumption of video games?
5 answers
Green computing, which focuses on reducing power consumption and carbon emissions in computing, plays a crucial role in mitigating the energy impact of video games. Studies show that gaming is energy-intensive, with varying consumption based on hardware, software, and gaming platforms. Green computing emphasizes efficient resource utilization, including optimizing GPU and CPU power consumption during gaming. Research also highlights the importance of energy-efficient design in GPUs for reducing energy consumption during numerical simulations on GPUs. By implementing green computing practices, such as minimizing power usage and maximizing energy efficiency in computing resources, the overall energy expenditure of gaming systems can be significantly reduced, contributing to a more sustainable gaming industry and lowering associated carbon emissions.What is the recommended contact distance for circuit breaker contacts according to industry standards?
5 answers
Industry standards recommend specific contact distances for circuit breaker contacts to enhance performance and longevity. According to the research data, the optimal contact distance ranges vary based on different aspects. The first contact part of the movable contact should be in contact with the first contact part of the fixed contact, while the distance between the second contact parts should be greater than 2 mm. Additionally, the distance from the lock catch point to the spring locating point of the moving contact should not exceed 9mm, and the distance to the contact surface in contact with the fixed contact should be less than 2.5mm. Moreover, a parallel opposite distance (L) between moving and static contacts ranging from 13.6 to 50mm is recommended for effective breaking capacity and improved product performance. These specifications aim to reduce electric burning loss, prolong the breaker's life, and enhance its breaking capacity.What is data driven fault diagnosis and approaches in HVAC industry?
4 answers
Data-driven fault diagnosis in the HVAC industry involves utilizing advanced analytical tools to detect and isolate faults in heating, ventilation, and air conditioning systems. These approaches rely on data analysis rather than explicit knowledge of system dynamics, making them accurate and cost-effective for fault detection and diagnosis in complex HVAC systems. Supervised-learning techniques, such as classification-based artificial neural networks and inference-based Bayesian networks, are commonly employed for fault diagnosis in HVAC systems, contributing significantly to research in this area. The integration of data-driven approaches requires optimal sensing and measurement architectures to detect multiple faults efficiently while minimizing the number of deployed sensors. Overall, data-driven fault diagnosis methods offer a promising solution for enhancing energy efficiency and system reliability in the HVAC industry.What is clean energy?
5 answers
Clean energy, also known as renewable energy, refers to energy sources that have minimal social, cultural, health, and environmental impacts. It includes energy generated from sustainable resources like solar, wind, hydro, and geothermal power. The urgent need for clean energy arises due to the finite nature of fossil fuels, which currently dominate energy production globally. Various innovative approaches have been developed to harness clean energy, such as using bicycles to power electric generators for charging small devices. Additionally, novel processes have been designed to extract energy efficiently from oil reservoirs while minimizing environmental impact, by utilizing in-situ combustion and closed-loop systems for electricity generation. These advancements aim to reduce pollution, combat climate change, and meet the increasing energy demands sustainably.What is the definition of load shedding?
4 answers
Load shedding is a strategic method of intentionally cutting off electrical power during periods of high demand or system instability to prevent widespread blackouts or voltage collapse. It involves prioritizing and selectively disconnecting loads to maintain system stability. Various techniques have been proposed to optimize load shedding, such as under voltage load shedding (UVLS) methods that consider load importance and location for efficient curtailment. In the context of real-time data processing in IoT applications, load shedding techniques are crucial to balance data variability and priority, ensuring important data retention based on project definitions and data variations. Load shedding systems can also enhance fault tolerance and resilience in message communications by dynamically managing data requests based on configurable criteria and status information.What is a bimeron?
5 answers
A bimeron is a magnetic quasiparticle that serves as the in-plane equivalent of a magnetic skyrmion, exhibiting unique static and dynamic properties with potential applications in spintronics. Bimerons can be stabilized in antiferromagnetic thin films with interfacial Dzyaloshinskii-Moriya interaction (DMI), showcasing high mobility and absorbing capabilities, leading to the formation of bimeron clusters with diverse topological numbers. Additionally, structured light known as bimeronic beams can mimic bimeron structures, offering a mechanism to transform topological states of light similar to skyrmionic transformations. Theoretical predictions suggest the existence of single bimerons and bimeron crystals, which can be utilized as bits of information in in-plane magnetized racetrack devices, enabling current-driven motion for specific torque orientations.What are the most effective methods for monitoring psychological and pedagogical guidance to ensure optimal student development?
5 answers
The most effective methods for monitoring psychological and pedagogical guidance to ensure optimal student development involve employing a system approach, personal-oriented approach, competence-oriented approach, and quality measurement approach. These methods focus on managing the quality of education, centering the educational process around the student, integrating knowledge and skills for personal-professional development, and considering preparedness as a multi-criterion parameter. Additionally, utilizing educational monitoring to evaluate knowledge, abilities, skills, and competences plays a crucial role in enhancing the effectiveness of pedagogical systems. By analyzing and generalizing factors affecting the quality of training university students, such as academic performance and training profiles, educators can predict and adjust the learning process to improve the quality of graduates' training.How does meditation affect the production and distribution of energy in the body?
4 answers
Meditation has a significant impact on the body's energy production and distribution. Research indicates that meditation practices like insight meditation, mindfulness, and focused attention meditation can influence the body's energy system positively. Meditation can lead to increased energy levels surpassing those achieved through deep sleep, enhance hormonal balance, and improve athletic performance by tuning the body and mind to peak states. Moreover, meditation can result in changes in cerebral energy metabolism, with specific alterations in energy ratios in different brain regions, indicating a higher energetic state and altered energy management in the brain. Overall, meditation plays a crucial role in optimizing energy levels, hormonal balance, and overall well-being through its effects on the body's energy system.What are the key findings of the EN-14889 report published in 2008?
5 answers
The EN-14889 report published in 2008 highlighted various key findings. It addressed the global energy crisis, projecting energy markets and security through different scenarios, emphasizing the implications for emissions and sustainable development goals. Additionally, the report discussed the rising prison population in England and Wales, focusing on the lack of debate regarding the reasons behind this increase and the need to find ways to halt it. Furthermore, the report emphasized the importance of participatory safeguards in criminal proceedings, highlighting the audi alteram partem rule in Europe and Latin America. Moreover, the report stressed the necessity for Asia to sustain economic growth amidst demographic challenges and provide economic security for the elderly through concrete policy options.