scispace - formally typeset
Search or ask a question

What is the minimum number of pins for a dual operational amplifier? 

Low-pass filter
Operational transconductance amplifier
Input offset voltage
Operational amplifier
Direct-coupled amplifier

Answers from top 9 papers

More filters
Papers (9)Insight
Proceedings Article•DOI
Automated design method for parameters optimization of CMOS analog circuits based on adaptive genetic algorithm
Jianhai Yu, Zhigang Mao 
01 Oct 2007
17 Citations
The outcome of the experiment for a two-stage operational amplifier shows that this is an accurate and promising way in determining the device sizes in an analog circuit.
Journal Article•DOI
Prophylactic pinning in slipped upper femoral epiphysis. Prevention of complications
R. J. H. Emery, R. C. Todd, D. M. Dunn 
01 Mar 1990-Journal of Bone and Joint Surgery-british Volume
45 Citations
The use of improved fixation devices may reduce the need for multiple pins.
Journal Article•DOI
Susceptibility of Operational Amplifiers to Conducted EMI Injected Through the Ground Plane into Their Output Terminal
Anna Richelli, Giovanni Delaini, Marco Grassi, Jean-Michel Redoute 
14 Jun 2016-IEEE Transactions on Reliability
17 Citations
Moreover, these illustrate that there is a considerable susceptibility of operational amplifiers to electromagnetic interference coupled to their output pins.
Journal Article•DOI
Low-voltage fully-differential CMOS switched-current filters
Rajesh Zele, David J. Allstot 
09 May 1993
41 Citations
An important feature of this approach is that a designer can optimize circuit performance by optimizing the well-known folded-cascode operational amplifier designs.
Book Chapter•DOI
Constraint multi-objective automated synthesis for CMOS operational amplifier
Jili Tao, Xiaoming Chen, Yong Zhu 
17 Sep 2010
6 Citations
A standard operational amplifier is then designed, the results show the proposed methodology is very effective and can obtain better specifications than other methods.
Journal Article•DOI
Output power performance of dual‐fed and single‐fed distributed amplifiers
Kimberley W. Eccleston
20 Nov 2000-Microwave and Optical Technology Letters
21 Citations
The dual-fed amplifier has the added advantage of being less affected by losses.
Journal Article•DOI
Construction of an extremal self-dual code of length 62
Masaaki Harada
01 May 1999-IEEE Transactions on Information Theory
10 Citations
Combined with known results, the above code also determines all lengths for which there are self-dual codes with minimum weight 12.
Journal Article•DOI
Low-Voltage Bulk-Driven Operational Amplifier With Improved Transconductance
Liang Zuo, Syed K. Islam 
25 Jan 2013-IEEE Transactions on Circuits and Systems I-regular Papers
133 Citations
The measurement results show significant improvement in the performance of the operational amplifier compared to prior arts.
Open access•Journal Article•DOI
Impact of MOSFET Gate-Oxide Reliability on CMOS Operational Amplifier in a 130-nm Low-Voltage Process
Ming-Dou Ker, Jung-Sheng Chen, Jung-Sheng Chen 
10 Jun 2008-IEEE Transactions on Device and Materials Reliability
24 Citations
The hard breakdown has more serious impact on the operational amplifier.

Related Questions

What is the optimal screw diameter for twin screw battery extrusion?5 answersThe optimal screw diameter for twin screw extrusion varies depending on the material being processed. In the context of processing light alloys like an AZ91D magnesium alloy, a counter-rotating twin screw mechanism with a certain diameter was utilized for semisolid forming. On the other hand, in foam extrusion of polypropylene with a foaming agent, a co-rotating twin screw extruder with an 18 mm screw diameter was employed. Additionally, for additive manufacturing with high viscous materials like nanocellulose paste, an experimental study optimized the processing parameters of a twin-screw extruder, including the screw speed, feeding rate, and printing speed, without specifying a particular screw diameter. Therefore, the optimal screw diameter for twin screw battery extrusion would depend on the specific requirements and characteristics of the battery material being processed.
What is the minimum wattage of appliances that can be used in a home?5 answersThe minimum wattage of appliances that can be used in a home varies depending on the specific appliance and its efficiency. Highly efficient direct current (DC) appliances have the potential to dramatically increase the affordability of off-grid solar power systems used for rural electrification in developing countries, with a combined power requirement of approximately 18 watts for a color TV, four DC LED lamps, a mobile phone charger, and a radio. Standby power use for most appliances ranges from 1 - 20 watts, and there is a growing international effort to limit standby power to around one watt per device. In a low-voltage DC household system, power consumption can be reduced by avoiding electric heating and replacing AC components with efficient low voltage DC components, such as in a prototype dishwasher that reduced peak power consumption from over 2000W to 80W. The power consumption of appliances can also be controlled based on their priority and usage context in a household.
What is the minimum current field required to have rated voltage at the terminals and a certain power factor?5 answersThe minimum current field required to have rated voltage at the terminals and a certain power factor can be determined by analyzing the interactive impacts between different ratings for the new VSC in a VSC-HVDC system. Additionally, the rated current of a synchronous reluctance motor can be adjusted to match the rated current of a commercially available inverter by rewinding and axial scaling of the motor, which can result in a lower current and lower kVA requirement. However, it is important to note that achieving a perfect power factor correction at the load terminals alone is not possible without supply commitment, and the refined expression for power factor takes into account both load parameters and line characteristics. Furthermore, the computation of load impedance magnitude can be used to impose rated cable current at the sending end, with variations in maximum power transferred to the receiving end depending on link length, conductor cross-sectional area, and load power factor.
How to design a multistage amplifier?10 answers
What conditions have to be satisfied when connecting two amplifiers in Cascade?9 answers
Which pin is used to check the output of amplifier?18 answers

See what other people are reading

What are the design considerations for low-power operational transconductance amplifiers in biomedical applications?
5 answers
Low-power operational transconductance amplifiers (OTAs) for biomedical applications require careful design considerations. Various techniques have been proposed to achieve low power consumption and high performance. For instance, techniques like enhanced bootstrapping linearization, current reuse cascode design, and composite flipped voltage follower with partial positive feedbackhave been suggested. These designs operate at low supply voltages, offer high gain, low power dissipation, and improved linearity. Additionally, incorporating features like fixed gain, ultra-low input noise, and self-biasing mechanismscan further enhance the efficiency of OTAs in amplifying weak bio-potential signals. Overall, the focus lies on achieving a balance between power consumption, linearity, gain, and other performance metrics to meet the stringent requirements of biomedical applications.What are the general characteristics of a low noise amplifier operating in high-frequency band for under water acoustics?
5 answers
A low noise amplifier (LNA) designed for high-frequency underwater acoustic applications typically exhibits characteristics such as low noise figure, good input impedance matching, and linearity enhancement. In the context of underwater electric field sensors, LNAs require low-noise amplification at ultra-low frequency bands, with noise characteristics significantly influenced by voltage noise density and transistor matching. Moreover, front-end circuits for underwater acoustic transmitters and receivers demonstrate capabilities like amplifying signals to high peak-to-peak voltages and achieving substantial amplification gains with out-band attenuation. These LNAs are crucial components in underwater systems, ensuring efficient signal amplification and reception for various underwater applications.How does the mask's geometry affect the performance of the CMOS amplifier?
5 answers
The geometry of the mask significantly impacts the performance of CMOS amplifiers. Different layout techniques, such as serpentine, concentric, and interdigitated layouts, play a crucial role in enhancing amplifier characteristics like electrical gain, power consumption, and surface area reduction. Moreover, the ratio L/W of the Hall cells and the geometrical correction factor G influence figures of merit in Hall sensors, including sensitivity, Hall Voltage, and power dissipation within the device. Additionally, geometric programming models consider channel length modulation and layout-dependent effects like shallow trench isolation stress and well proximity effect, affecting circuit synthesis in nanometer processes. These findings emphasize the importance of optimizing mask geometry for improved CMOS amplifier performance.Amplifier design for deep water echo sounding
5 answers
An essential component in deep water echo sounding systems is the amplifier, crucial for enhancing weak echo signals. Various amplifier designs have been proposed in research. One study presents a Class D power amplifier for sonar systems, operating at low frequencies with high output power. Another paper introduces a digitally controlled sonar power amplifier utilizing Sine Pulse Width Modulation signals for echo ranging sonar, demonstrating effective use in underwater transmitters. Additionally, a matching circuit design for broadband underwater acoustic transducers is highlighted as a key technology in sonar systems, emphasizing the importance of reducing energy loss, extending system bandwidth, and improving waveform distortion. These studies collectively contribute valuable insights into amplifier designs tailored for deep water echo sounding applications.What is the relationship between thermal EMF and computer-controlled scanner performance?
5 answers
The relationship between thermal electromotive force (EMF) and computer-controlled scanner performance is crucial for achieving accurate measurements. Various studies have focused on developing low thermal EMF scanners for calibration purposes. These scanners are designed to automate the calibration process with high repeatability at the nanovolt level. The thermal EMF of the scanner can introduce offset voltages during measurements, impacting accuracy. By characterizing the thermal EMF using differential measurement methods, researchers have shown that the impact of thermal EMF can be minimized, especially for uncertainty levels below 10 ppm. Additionally, statistical analyses like Allan variance have been employed to demonstrate sub-nanovolt residual thermal EMFs, showcasing the robustness of these scanners even after numerous connections.How does the conversion of weight affect the accuracy of measurements of stduents?
5 answers
The conversion of weight plays a crucial role in the accuracy of measurements. Utilizing a weight calibration-based high-precision analog-to-digital converter can significantly enhance accuracy by reducing design complexity, layout area, and power consumption. Electronic scale apparatus with differential amplifiers aids in determining weight accurately by balancing coarse and fine measurements. In electronic measuring systems, automatic gain correction counters drift due to temperature changes, aging, and supply conditions, maintaining measurement accuracy. A calibration apparatus for medical probes computes calibration coefficients based on measurements of tip deformation under force vectors, ensuring precise force assessment. These methods and technologies contribute to improving the accuracy of weight conversion and, consequently, the overall precision of measurements, benefiting students in various educational and research settings.Are there any Papers about the application of optimization methods in operation researches?
5 answers
Yes, there are papers discussing the application of optimization methods in operations research. One paper highlights the significance of operations research in healthcare, emphasizing the use of optimization models and mathematical algorithms to enhance resource utilization. Another paper focuses on economic management systems, showcasing how operations research aids in coordinating limited resources effectively for decision-making. Additionally, there are papers that delve into the optimization models and algorithms of operational amplifier topologies, showcasing advancements in low-power applications and gigahertz bandwidth. Furthermore, a paper addresses coordination and stockroom problems, utilizing action studies and queuing theory to optimize transportation processes in various industries. These papers collectively demonstrate the diverse applications of optimization methods within the realm of operations research.What is the measured peak gain for 7-elements antenna array GNSS?
4 answers
The measured peak gain for a 7-element antenna array designed for GNSS applications is not explicitly provided in the given contexts. However, various related information can be extracted from the abstracts. The proposed seven-element array antenna includes a GNSS radio frequency module and seven BD2 radio frequency modules. Additionally, a four-element spiral array designed for GNSS applications achieved greater than 1 dBic peak realized gain. The antenna array conformal to a spherical cap presented in another study achieved a gain between 0 dB and 4 dB at specific frequencies. While specific peak gain measurements for the 7-element array are not directly stated, the information from the contexts highlights the capabilities and design considerations of antenna arrays for GNSS applications.How is data transmitted wirelessly from a metering module?
5 answers
Data is wirelessly transmitted from a metering module through various methods outlined in the research papers. The wireless transmission systems involve components like sensors, transmitters, receivers, and processors to facilitate data transfer. These systems utilize technologies such as NB-IoT, radio frequency communication, and WiFi modules to enable seamless data transmission. For instance, the use of radio frequency transmit-receive chips, front-end modules, and antennas in the wireless communication module ensures effective communication within specific frequency bands. Additionally, the incorporation of filtering modules helps reduce signal interference during data transmission, enhancing the overall reliability of the wireless data transfer process. The Sub-1GHz wireless modules play a crucial role in automatically collecting metering data and transmitting it to designated receivers.How is smart meter data transmitted wirelessly from a metering module?
5 answers
Smart meter data is transmitted wirelessly through various methods. One approach involves using a system with meter transducers, a transmitter unit, a receiver unit, and a computer, where the transmitter unit wirelessly connects to sensors in the building and then transmits data to a remote receiving unit or a mobile data converter for computer connection. Another method utilizes a WIFI-based intelligent meter data acquisition module, which processes electrical signals through filters, converts them into pulse signals, and then transmits power information via a WIFI module. Additionally, a LoRaWAN-based system enables smart meters to send data to a network server through a mobile network, which then forwards it to an M2M platform, establishing an efficient wireless remote metering infrastructure.What are good papers that explain the delta method of minimizing offset thermal EMFs?
5 answers
The delta method for minimizing offset thermal EMFs is well explained in the paper by Rodenbeck et al., where they introduce a technique called "delta modulation" (DM) to improve the sensitivity of RF subsamplers in radar and coherent receiver applications. This method involves feeding the time-average output of a monobit analog-to-digital converter (ADC) back to the ADC input with opposite polarity to correct for aggregate DC offsets, enhancing ADC sensitivity. The paper demonstrates the effectiveness of analog and digital DM circuits in correcting output quantization imbalance, even under varying temperature conditions, and improving baseband spectrum quality for realistic radar applications. The DM technique does not impact ADC linearity, as confirmed through two-tone testing.