scispace - formally typeset
Search or ask a question

What type of fiber is in Vitafusion fiber gummies? 

Answers from top 12 papers

More filters
Papers (12)Insight
Thus, the chitosan-PAA PIC fiber is a new composite fiber composed of a polysaccharide and a vinyl polymer.
As soluble fiber may contain more than 70% polyuronide the results indicate an urgent need for standardization in fiber methodology.
Journal ArticleDOI
D. Nabi Saheb, Jyoti P. Jog 
2.2K Citations
The natural fiber composites offer specific properties comparable to those of conventional fiber composites.
Biological properties possessed by one type of fiber might not be shared by another type.
Most fiber types used show a reinforcing effect in accordance to the respective fiber properties.
The effect on fiber properties is of particular significance.
Fiber morphology has a significant effect on the mechanical properties of fiber/polymer composites.
Thus, this fiber is a potential composite reinforcement.
Flax is a promising natural fiber.
The results revealed that the said fiber-rich materials might be a potent fiber source for health foods.
This indicates better fiber–fiber interactions and improved fiber–fiber stress transfer.
Finally, the effects are more pronounced in the semi-concentrated regime, and this is attributed to enhanced fiber-fiber interactions.

See what other people are reading

How does mechanical recycling of a polymer affect the polymer structure?
5 answers
Mechanical recycling of polymers can lead to structural changes and property alterations. Studies on polylactic acid (PLA) and high-density polyethylene (HDPE) show that mechanical recycling can cause discoloration, degradation, and changes in crystallinity. The process may reduce molecular weight, weaken mechanical properties, and affect the surface morphology of recycled polymers. However, the impact on properties varies depending on the polymer type and the presence of reinforcing agents like fibers. While mechanical recycling is effective in reducing waste and emissions, it may not fully restore the original properties of the polymer. Chemical recycling, breaking down polymers into monomers, offers a way to maintain quality comparable to virgin polymers, especially for mixed materials.
What is the ELECTRICAL conductivity of micro-Al2O3?
5 answers
The electrical conductivity of micro-Al2O3 varies depending on factors like doping ratios, particle size, volume fraction, and temperature. Studies have shown that the electrical conductivity of Al2O3-based ceramics can be optimized by doping with Al2O3 in specific amounts. Additionally, the percolation threshold for Nb-Al2O3 composite materials is influenced by the particle size of alumina used for sample preparation. Furthermore, the electrical conductivity of water-based Al2O3 nanofluids with 12 nm particles increases with both volume fraction and temperature, showing a significant enhancement at higher volume fractions. These findings suggest that the electrical conductivity of micro-Al2O3 can be tailored through various methods to achieve desired levels of conductivity for specific applications.
What is the purpose of surface analysis by hydrolysis of 3d printed PLA?
5 answers
Surface analysis by hydrolysis of 3D printed PLA serves the purpose of evaluating the effects of degradation on the material's properties. This analysis involves studying the changes in surface chemistry, roughness, and hardness of the PLA structures subjected to hydrolysis. By conducting hydrolysis experiments, researchers can detect degradation products, such as monomers like BisGMA, TEGMA, and TEGDMA, which provide insights into the material's stability and susceptibility to enzymatic degradation. Additionally, hydrolysis via a buffer system allows for a comparison of the material's behavior with other fabrication methods like self-curing and CAD/CAM processes. Overall, surface analysis through hydrolysis aids in understanding how 3D printed PLA responds to environmental factors, contributing to the optimization of material durability and performance in various applications.
What is the most effective ingredient for a stronger and smoother hair?
5 answers
The most effective ingredient for stronger and smoother hair is a combination of active ingredients found in Restolin Hair Supplement. Restolin contains a blend of potent plant extracts, including Vitamin D, Reishi mushroom, Turmeric, Garlic powder, Olive Leaf, Green Tea, Panax Ginseng, Graviola leaf, Beat-Glucan, and Pine bark. These ingredients work synergistically to promote healthy hair growth, repair damaged follicles, enhance hair texture, prevent hair fall, and strengthen hair strands. Additionally, Restolin inhibits harmful steroid activity, accelerates hair growth, and improves blood circulation to the scalp. The combination of these natural ingredients in Restolin addresses the root cause of hair issues, providing nourishment and care for stronger, smoother, and healthier hair.
Please explain more about ionic liquid stabilizer in nitrocellulose?
5 answers
Ionic liquid stabilizers play a crucial role in enhancing the stability of nitrocellulose-based propellants. These stabilizers, such as cholinium glycinate ionic liquid, have been shown to preserve the tensile strength of aged paper treated with them. Additionally, the thermal behavior of nitrocellulose can be significantly influenced by various stabilizers like diphenylamine, ethyl centralite, and akardite II, which decrease the maximum heat release rate and increase the induction period of heat release. Furthermore, the compatibility and stability of certain stabilizers, like STAB-1, have been demonstrated to effectively stabilize nitrocellulose for extended periods, showcasing their importance in long-term storage. Overall, ionic liquid stabilizers offer a promising avenue for improving the properties and longevity of nitrocellulose-based materials.
How does the use of Llama 2 in loan syndication affect the efficiency and effectiveness of the process?
5 answers
The use of Llama 2 technology in loan syndication can enhance efficiency by improving data dissemination protocols, reducing dissemination delays, and selecting appropriate master tags efficiently. This technology can streamline the administration of syndicated loan transactions, simplify approvals, and support loan trading, ultimately enhancing the overall effectiveness of the syndication process. However, the efficiency gains from technology must be balanced with the potential drawbacks of reduced monitoring incentives due to risk diversification in loan syndication, which can lead to sub-optimal monitoring efforts and discounted loan trading in the market. Therefore, while technology like Llama 2 can boost operational efficiency, it is crucial to address the monitoring challenges to maintain the effectiveness of the loan syndication process.
What can be said about the material toughness of ABS ?
5 answers
The toughness of ABS (Acrylonitrile Butadiene Styrene) materials can be significantly enhanced through various methods. One approach involves the preparation of stress-cracking-resistant high-flowability high-toughness ABS material using a PB-g-SAN graft copolymerization macromolecular modifier, which improves toughness and reduces stress cracking. Another method includes the utilization of modified SBS elastomer, silicone oil, stearic acid, and other additives to create ABS composite materials with good toughness and aging resistance for 3D printing applications. Additionally, high strain rate loading tests on ABS polymers reveal a linear relationship between stress and strain, with increased plastic deformation and stress levels at higher strain rates, providing insights for energy absorption applications. Furthermore, incorporating paper ball-shaped graphene microspheres as toughening agents can further improve the toughness of ABS materials, enhancing their overall properties.
Does sds improve metal loading in polycaprolactone material?
5 answers
The addition of SDS (sodium dodecyl sulfate) does not directly improve metal loading in polycaprolactone (PCL) material based on the provided research contexts. Instead, the studies focus on enhancing the mechanical properties and structural characteristics of PCL composites through the incorporation of different materials like calcium sulfate (CS) particles and whiskers. Various methods such as coprecipitation and melt blending are explored to create PCL/CS composites, leading to improvements in flexural modulus, impact strength, and crystallization properties. Additionally, the energy density during selective laser sintering affects the fusion and mechanical properties of PCL specimens, showcasing the feasibility of manufacturing PCL products for specific applications. While SDS was not directly mentioned in the contexts, the research primarily focuses on the impact of different materials on the properties of PCL composites.
How to convert banana peel into bio-leather?
5 answers
To convert banana peel into bio-leather, a process involving the extraction of pectin from banana peel, followed by the addition of various substances, is utilized. The extracted pectin is combined with water, CaSO4, tapioca starch, acetic acid, and glycerin to form a bioplastic material. Additionally, another study focused on utilizing banana peel and cellulose from the pseudostem of the plant to create a bioplastic material. The process involved dry milling to extract flour, an acid-alkaline treatment for cellulose, and a mixture design incorporating shell flour, NaOH, water, glycerol, sorbitol, and cellulose as fillers. The resulting bioplastic was characterized by its properties like thickness, water vapor permeability, tension force, break time, and biodegradability, showcasing its potential as a replacement for synthetic plastics. These methods demonstrate innovative ways to repurpose banana peel into sustainable and eco-friendly bio-leather alternatives.
What are the various lean manufacturing techniques, which support additive manufacturing?
5 answers
Various lean manufacturing techniques that support additive manufacturing include the generation of easily removable support structures, postmanufacturing processing for support removal, and the use of different additive manufacturing (AM) techniques like Fused Deposition Modeling (FDM), Fused Filament Fabrication (FFF), and Liquid Crystal Display (LCD) printing for composite manufacturing. Additionally, electroless nickel plating is highlighted as a robust option for surface hardening and finishing AM components, enhancing their mechanical properties and scratch resistance. These techniques focus on optimizing processes, reducing material waste, and improving the overall efficiency of additive manufacturing operations, aligning with lean manufacturing principles.
What is the particulate matter of abaca fibre?
4 answers
The particulate matter of abaca fiber refers to its structural components and characteristics. Abaca fiber, derived from the leaf sheaths of the Musa textilis plant, consists of cellulose, pectin, lignin, glycerides, ketones, fatty acids, and other compounds. These components contribute to the fiber's high mechanical strength, durability, and flexibility, making it a valuable renewable bio-resource for various industries. Additionally, abaca fiber has been utilized in the development of nanomaterials, biodegradable materials, and composite materials for applications in aerospace, automotive, shipping, construction, and furniture industries. The fiber's composition and properties make it suitable for diverse applications, showcasing its versatility and importance in different sectors.