scispace - formally typeset
Search or ask a question

Where is capacitor on outside AC unit? 

Capacitor
Voltage source
AC/AC converter
Capacitive sensing
H bridge

Answers from top 8 papers

More filters
Papers (8)Insight
Open access•Journal Article•DOI
Mutual capacitor and its applications
Chun Li, Jason Li, Jieming Li 
29 May 2014-The Journal of Engineering
18 Citations
This study presents a new ac circuit element – the mutual capacitor, being a dual of the mutual inductor, which is also a new ac transformer.
Journal Article•DOI
Multi-Input Switched-Capacitor Multilevel Inverter for High-Frequency AC Power Distribution
S. Raghu Raman, Ka Wai Eric Cheng, Yuanmao Ye 
01 Jul 2018-IEEE Transactions on Power Electronics
93 Citations
This paper proposes a switched-capacitor multilevel inverter for high-frequency ac power distribution systems.
Open access•Proceedings Article•DOI
Voltage Source Inverter for Voltage and Frequency Control of a Stand-Alone Self-Excited Induction Generator
H.S. Timorabadi
01 May 2006
15 Citations
Results indicate a wide control range and elimination of the three-phase AC capacitor bank.
Journal Article•DOI
Simulation of cathodically protected pipeline with capacitive AC mitigation devices for interpretation of misleading instant Eoff readings
N. Kioupis, N. Kouloumbi, George Batis 
12 Nov 2013-Corrosion Engineering Science and Technology
8 Citations
Furthermore, the capacitive AC mitigation devices should not be disconnected from the pipeline in order to prevent the adverse effects of AC interference on cathodic protection monitoring.
Journal Article•DOI
Double-layer capacitors composed of interconnected silver particles and with a high-frequency response
Dmitri A. Brevnov, Tim S. Olson 
05 Jan 2006-Electrochimica Acta
29 Citations
The described capacitor could find applications for special electronic circuits where a high-frequency response is needed.
Journal Article•DOI
Optimal capacitor placement in distribution systems by genetic algorithm
Gary Boone, Hsiao-Dong Chiang 
01 Jun 1993-International Journal of Electrical Power & Energy Systems
143 Citations
These properties allow optimization of a practical formulation of the capacitor placement problem which includes the discrete nature of capacitor installations.
Journal Article•DOI
An Easy-to-Interface CDC With an Efficient Automatic Calibration
Vijayakumar Sreenath, Boby George 
01 May 2016-IEEE Transactions on Instrumentation and Measurement
15 Citations
In addition to this advantage, the AC helps to remove the dependence on the accuracy of the reference capacitor employed in the CDC.
Journal Article•DOI
Design and testing of an integrated electronically controlled capacitor for integral and fractional horse power single phase induction motor
Jawad Faiz, F Kasebi, Pragasen Pillay 
01 Nov 2004-Energy Conversion and Management
11 Citations
In addition, replacing the ac capacitor with one rated for dc can lead to a system reduction, in addition to a considerable reduction in the size of the circuit due to the use of integrated circuits.

Related Questions

How do I find the right capacitor for my AC unit?10 answers
How much does a capacitor for AC unit?7 answers
How much is a run capacitor for AC unit?8 answers
Where is the capacitor on an outside air conditioning unit?8 answers
Where is the capacitor on my Trane AC unit?7 answers
Where is the fan capacitor located on my AC unit?18 answers

See what other people are reading

How to bend a flex sensor in every direction?
4 answers
To bend a flex sensor in every direction, various approaches can be considered based on the design and materials used in the sensor. One method involves utilizing a printable porous conductive composite composed of polydimethylsiloxane (PDMS) and carbon black (CB) to create a flexible bending sensor with high bidirectional sensitivity and excellent durability. Another option is to use tin-doped indium oxide (ITO) nanoparticles assembled in line patterns on flexible substrates to produce highly sensitive and flexible bending strain sensors with adjustable gauge factors and low crosstalk between bending directions. Additionally, a sensor designed to measure both linear displacement and bending can be employed, utilizing three-phase electrodes to estimate displacement and bending from changes in capacitance, allowing for measurements in multiple directions with little interference.What is the current state of ADC compensation research and what are the main unsolved problems?
4 answers
Current research in ADC compensation focuses on innovative techniques to address inherent challenges like capacitor mismatch and analog signal path errors. Techniques like Dynamic Element Matching (DEM)and backpropagation-based compensationhave shown promising results in improving ADC performance. However, challenges persist, such as the need for adaptive background compensation to mitigate errors caused by process variations in CMOS implementations, the impact of time-interleaved ADC (TI-ADC) mismatches on receiver performance, and the nonlinear distortion induced by TI-ADC structures in full-duplex transceivers. Unsolved problems include achieving high manufacturing yield in the presence of process variations, maintaining robustness and convergence speed in compensation techniques, and effectively mitigating ADC imperfections to ensure optimal system performance.What is starter cell in this publication?
4 answers
In the publications provided, a starter cell is described in different contexts. In one instance, a starter cell is designed for plant growth, featuring openings for seeding and root passage, along with strategically placed ridges to guide root development and prevent twisting. Another mention of a starter cell refers to its role in a circuit, where it is part of a system that couples and decouples a power supply input to a supply capacitor based on the switching status of the circuit. Additionally, a different publication discusses a starter cell used in a fuel cell system, where part of the fuel is converted into hydrogen gas to enhance starting performance, especially at low temperatures. These varied applications highlight the diverse functionalities of starter cells in different fields.How to caluclate the natural frequency of an RLC series circuit?
4 answers
To calculate the natural frequency of an RLC series circuit, various factors need to be considered. The natural frequency increases with plate distance but decreases with plate area and linear inductance coefficient. Additionally, the resonance and anti-resonance frequencies can be accurately determined by analyzing the impedance values of the circuit, even in the presence of damping effects. The circuit's components, such as resistance, inductance, and capacitance, play crucial roles in determining the natural frequency. Moreover, the medium inside the capacitor, dielectric constant, and special radiation generated due to charge imbalances impact the spectral form of the radiation, influencing the overall behavior of the circuit.How does the piezoelectric coefficient of BCZT compare to that of PVDF under different loading conditions?
5 answers
The piezoelectric coefficient of BCZT ceramic varies based on the loading conditions. BCZT ceramic exhibits a piezoelectric coefficient of approximately 577 pC/N. On the other hand, PVDF, when incorporated into piezoelectric composites, shows a piezoelectric charge coefficient (d33) of around 26-27 pC/N and a piezoelectric voltage coefficient (g33) of 16.0 × 10−3 V·m/N when combined with BZT ceramic. Furthermore, the addition of BCZT nanowires into a PVDF-TrFE matrix enhances the piezoelectric properties, with a composite containing 15 wt % BCZT nanowires achieving a high energy harvesting figure of merit of 5.3 × 10–12 m2/N. These findings highlight the superior piezoelectric performance of BCZT ceramic compared to PVDF under different loading conditions, emphasizing the potential for BCZT-based composites in energy harvesting and sensor applications.Voltage and frequency stability of wind integrated power system using FACTS devices?
10 answers
The integration of wind power into the electrical grid introduces challenges related to voltage and frequency stability due to the intermittent nature of wind energy. Flexible AC Transmission System (FACTS) devices have been identified as effective solutions to mitigate these issues and enhance the stability of wind-integrated power systems. The Static Synchronous Series Compensator (SSSC) and Static VAR Compensator (SVC) are among the FACTS devices that have shown promise in improving the damping performance and voltage stability in wind-integrated grids. The SSSC, through optimally tuned PI controllers using algorithms like Teacher–learner-based optimization (TLBO) and gray wolf optimization (GWO), has demonstrated superior capability in damping power oscillations, which are common in wind generator integration with the grid. Similarly, the SVC has been recommended for its cost-effectiveness in enhancing voltage stability and Fault Ride-Through (FRT) capability, especially in systems integrated with wind-driven squirrel cage generators (SCIG). Moreover, the integration of STATCOM with Superconducting Magnetic Energy Storage (SMES) devices has been investigated for improved grid functioning with wind farms, offering enhanced control over intermittent wind generators by stabilizing the grid under different fault conditions. The application of other FACTS devices like the thyristor-controlled series compensator (TCSC) and unified power flow controller (UPFC) has also been explored for their impact on system economy and risk reduction in both regulated and deregulated environments. Virtual Synchronous Generator (VSG) technology applied to Permanent Magnet Synchronous Generators (PMSG) has been proposed to provide necessary frequency and voltage support, improving transient stability in wind power systems. Additionally, novel frequency support strategies for VSC-HVDC systems with large wind power integration have been proposed to address frequency stability problems by providing fast active power support. Real-time voltage stability monitoring using Phasor-measurement-unit (PMU) based wide-area monitoring in DFIG integrated wind power systems has been emphasized for its importance in maintaining system stability. Battery Energy Storage Systems (BESS) have been recognized for their rapid response to system disturbances, offering a viable solution for system stability issues, with placement strategies focusing on enhancing frequency stability. Lastly, the use of STATCOM and SSSC has been highlighted for improving both voltage and transient stability in wind-dominated power systems, ensuring stable operation under various scenarios. In conclusion, FACTS devices play a crucial role in addressing voltage and frequency stability challenges in wind-integrated power systems, with various devices and strategies offering tailored solutions to enhance grid reliability and performance.What is current technology in battery and supercapacitor charging for EV system?
5 answers
The current technology in battery and supercapacitor charging for Electric Vehicle (EV) systems involves innovative approaches to enhance charging efficiency and longevity. One method includes integrating supercapacitors into EVs to facilitate rapid charging. Another approach focuses on utilizing supercapacitors from EVs in hybrid energy storage systems to improve the lifetime of central battery storage systems in microgrids. These strategies aim to optimize charging profiles, increase energy storage system efficiency, and enhance voltage quality in EV systems. Supercapacitors, also known as ultracapacitors, offer quick charge and discharge cycles without compromising long-term performance, making them ideal for improving the overall effectiveness of battery-supercapacitor hybrid systems in EV charging.What are the injuries that causes automatic startup in a manufacturing sector?
5 answers
In the manufacturing sector, injuries related to automatic startup can occur due to various factors. Studies have shown that automation accidents often result in injuries to the hands and fingers, with machine operators being the most frequently injured individuals. These injuries typically occur when there is contact between a person and a moving part of an automated machine, highlighting the importance of safety devices to prevent such incidents. Additionally, accidents related to advanced manufacturing systems, such as computer-integrated manufacturing systems (CIMS), have led to severe injuries including fatal outcomes and amputations, emphasizing the need for improved safety measures in automated environments. Furthermore, disturbances in automatic production systems have been linked to decreased worker safety, with causes including design errors, component failures, human factors, and external factors.How to determine the dc link capacitance value for a bidirectional converter?
4 answers
To determine the DC-link capacitance value for a bidirectional converter, various methods and models have been proposed in research. One approach involves utilizing support vector machine regression and LSTM-SVR algorithms to predict capacitance faults in bidirectional DC-DC converters. Another method suggests using an improved recursive extended least square (RELS) algorithm based on a pre-charging model and noise evaluation to estimate capacitance accurately in traction converters. Additionally, a parameter identification method based on a model and improved BPNN has been proposed for accurate identification of component parameters in bidirectional DC-AC converters. Analytical expressions for capacitor current have also been provided to optimize system design and choose accurate DC-link capacitor ratings in medium-voltage grid-tied systems.What methods exist to integrate electrical components into micro fluidics?
5 answers
Various methods exist for integrating electrical components into microfluidic devices. One approach involves fabricating 3D electrical sensors by placing a blanket electrode on the microfluidic channel walls, allowing for higher sensitivity, extended sensing volumes, and simplified creation of sensor networks. Another method includes integrating an array of electronic sensors with electrodes submerged into fluidically connected wells of a microfluidic device, enabling trans-epithelial electrical resistance measurements. Additionally, a cost-effective xurography technique can be utilized to fabricate passive electronic components like resistors, inductors, capacitors, and memristors within microfluidic channels, enhancing the electrical performance of these components for various applications. Furthermore, a combination of xurography and cold lamination has been demonstrated as a fast, inexpensive, and direct method for fabricating electrodes in microfluidic devices, suitable for applications such as electrochemical sensing and temperature control.How does timer affects spot the difference task?
5 answers
The timing circuit described inplays a crucial role in tasks like spot-the-difference by ensuring precise timing relationships despite variations in resistance voltage. In the context of embodied AI and the spot-the-difference task, the timing aspect is essential for agents to efficiently identify changes in the environment within a fixed time budget. The proposed exploration policy in embodied AI leverages previous knowledge of the environment to detect alterations effectively, showcasing superior performance compared to existing models. Therefore, the timer, through its ability to maintain accurate timing relationships despite voltage or temperature fluctuations, significantly impacts the efficiency and success of spot-the-difference tasks in embodied AI scenarios.