scispace - formally typeset
Search or ask a question

Answers from top 9 papers

More filters
Papers (9)Insight
The combination of high solar shares with high conversion efficiencies is one of the major advantages of solar gas turbine systems compared to other solar-fossil hybrid power plants.
However, on the long run, the man with generator will end up spending more on power generation than the person who invest in solar photovoltaic.
Solar energy will make a valuable contribution for power generation in the future.
Concentrating solar power plants are an attractive option in the renewable energy generation market.
Therefore, solar power has a different influence on generating system reliability compared to conventional power sources.
The experimental results show that the proposed solar power generation system has the expected performance.
The proposed generator has minimized thickness, high efficiency and enhanced power output.
The proposed generator has high power density, robustness, and easy modeling and construction.
The proposed circuit is able to harvest solar energy down to a power level of 1.6 mW while maintaining comparable performance with previously presented results at higher power levels.

Related Questions

What are the kinds of inverter for solar energy?4 answersThere are several kinds of inverters for solar energy. One type is the DC/AC power converter, which is used to convert and alter the electric power generated from solar energy for use in household and industrial machines. Another type is the multilevel inverter (MLI), which has benefits such as lower voltage stresses, lower harmonics, near sinusoidal output, and improved efficiency. The MLI can be designed as a single-phase or three-phase neutral point clamped (NPC) inverter, with configurations up to five levels. Additionally, the flying capacitor multilevel inverter is another type that can be used for solar power applications. It can be designed as a single-phase three-level, five-level, or seven-level inverter. Finally, the single-stage converters, such as the split source inverter (SSI), are being used for grid-connected solar systems. The SSI has advantages like lower device count and lower switch voltage stress, making it suitable for solar applications.
What are the advantages of solar energy?4 answersSolar energy has several advantages. It is a clean and ecological energy source, resulting in low carbon emissions and no reliance on fossil fuels. Solar energy is abundant, economical, and sustainable, making it a promising substitute for non-renewable fossil fuels. It also offers benefits such as reducing greenhouse gas emissions and generating electric power. Solar energy is the cleanest form of energy and brings economic and environmental benefits. Solar power systems are durable, environmentally friendly, and reduce carbon footprints. Additionally, solar energy is abundant, secure, and cheap to run and maintain. Overall, solar energy offers advantages such as low carbon emissions, abundant supply, economic benefits, and environmental protection.
How do the costs of solar energy compare to other sources of energy?3 answersSolar energy costs vary depending on the specific system and its components. In some cases, the capital costs of solar energy systems can be higher compared to conventional energy sources such as diesel generators and power stations. However, solar energy systems have lower operating costs and energy costs compared to other sources of energy. The cost of solar power plants is primarily determined by the cost of building the plant, with solar cells accounting for a significant portion of the total cost in photovoltaic plants. In terms of cost-effectiveness, fixed solar systems connected to the grid are often more favorable compared to mobile systems and independent fixed systems. Solar thermal collectors, when combined with grid-driven electric boilers, can be an economical alternative to gas boilers. Overall, the cost of solar energy depends on various factors, but it is increasingly becoming a competitive and economically feasible option for meeting energy needs.
How can solar energy be used to generate electricity?3 answersSolar energy can be used to generate electricity through two main methods: direct and indirect. In the direct method, solar energy is converted into electricity using photovoltaic (PV) modules. These modules harness solar irradiation and convert it directly into electrical energy. In the indirect method, thermal energy from the sun is utilized to generate electricity through concentrated solar power (CSP) plants. These plants employ technologies such as linear Fresnel collectors, parabolic trough collectors, central tower systems, and solar parabolic dishes. The thermal energy collected is then used to produce steam, which drives turbines to generate electricity. Additionally, solar energy can also be converted into electrical energy using thermoelectric converting units, which convert heat energy into electricity. Overall, solar energy offers a clean and renewable source for electricity generation, with both direct and indirect methods providing viable options.
What can run on solar power?10 answers
What is India's rank in solar power generation?8 answers

See what other people are reading

Who study this ?Foldable solar charger?
5 answers
The development and study of foldable solar chargers have been undertaken by various researchers. Zhang Jianyu, Li Peilun, Xu Kefei, and Li Helin have worked on a folding solar charger design that includes a solar cell panel and a charging device, allowing for efficient charging and portability. Additionally, Jie Feng and Hong Feng have contributed to the field with a foldable solar charger design featuring crystal silicon cells encapsulated between flexible layers, ensuring durability and compactness for easy transportation. Furthermore, Zhao Liang, Xue Jun, Xia Ying, Wang Li, Huang Li, and Tang Weiwei have explored a portable solar charger design with multiple sets of solar cells for efficient charging, compactness, and environmental friendliness. These studies collectively advance the technology and usability of foldable solar chargers for various applications.
How fuel cell energy source support the electrical grid?
5 answers
Fuel cell technology, particularly solid oxide fuel cells (SOFCs) and low-temperature PEM cells, supports the electrical grid by offering flexibility, reliability, and sustainability. SOFCs can generate electricity efficiently from hydrogen, reducing reliance on fossil fuels and integrating renewable energy sources. PEM cells provide flexibility to the grid, ramping up and down quickly to meet demand, thus enhancing grid stability. Additionally, fuel cell systems, when combined with other renewable sources like photovoltaic panels, can supply excess power to the grid during off-peak hours, reducing consumer costs and enhancing grid resilience. Moreover, fuel cells can serve as stable energy sources for IoT devices during grid failures, ensuring uninterrupted power supply. Overall, fuel cell energy sources play a crucial role in improving the efficiency and sustainability of the electrical grid.
What is solar irradiance?
5 answers
Solar irradiance refers to the energy received from the Sun as electromagnetic radiation, crucial for renewable energy applications. It is the primary energy source for the planets in the Solar System, influenced by solar rotation and active regions on the Sun's surface. Extraterrestrial solar irradiance is calculated at the top of Earth's atmosphere, adjusted for atmospheric attenuation, impacting energy transmission to the surface. Predicting solar irradiance is vital for efficient utilization in solar power systems, with new models like the Variant Input Scoring Optimized Recurrent Neural Network enhancing forecasting accuracy. Understanding solar irradiance variability and accurately estimating it are essential for various applications, including climate modeling, power generation forecasts, and planetary atmosphere studies.
Does photovoltaics reinjection to power grid need galvanic isolation?
5 answers
Photovoltaic reinjection to the power grid can benefit from galvanic isolation to ensure safety and power quality. Galvanic isolation is crucial in grid-connected photovoltaic systems to prevent leakage currents and enhance efficiency. Various topologies of isolated PV microinverters have been proposed to address efficiency and safety concerns, highlighting the importance of galvanic isolation in such systems. Additionally, the use of galvanic isolation in DC/DC converters for PV systems is recommended for safety reasons, especially in scenarios where grounding is not feasible. Therefore, incorporating galvanic isolation in photovoltaic reinjection systems can improve system reliability, safety, and overall performance.
Why is solar energy power good?
5 answers
Solar energy power is considered beneficial due to its clean, renewable, and abundant nature. It is a sustainable energy source that helps reduce environmental impact by decreasing reliance on fossil fuels. Solar power systems are durable, efficient, and contribute to lowering carbon footprints. The sun's energy can be harnessed for various purposes like electricity generation, heating, cooling, and industrial uses. Solar energy is cost-effective, with ongoing advancements in technology aimed at increasing efficiency and deployment at both small and large scales. Additionally, solar power systems provide energy independence, reduce the risk of power disruptions, and have the potential to significantly decrease the need for fossil fuels, thus aiding in the fight against global warming.
Why people use chatbots?
4 answers
People use chatbots for various reasons. Research shows that users are motivated by factors such as productivity, entertainment, social interaction, curiosity, and the need for quick and efficient assistance. Chatbots are increasingly utilized across different sectors like cultural heritage, entertainment, education, marketing, healthcare, and customer support, offering benefits such as effective communication, cost reduction, and increased efficiency. The ability of chatbots to automate mundane tasks, provide timely information, and engage in informal conversations makes them appealing to users seeking convenience and quick access to information. Additionally, the development of chatbots in various languages is essential to cater to a broader user base and enhance communication across different regions.
How does the implementation of IoT technology affect the efficiency and cost-effectiveness of commercial cleaning services?
5 answers
The implementation of IoT technology in commercial cleaning services significantly enhances efficiency and cost-effectiveness. By utilizing IoT-based systems, such as brush-based programmed systems, robotic cleaners equipped with AI algorithms and high-pressure water jets, and automated disinfecting robots with remote control capabilities, cleaning processes become automated, reducing labor costs, improving cleaning quality, and increasing energy output. These technologies enable real-time monitoring, precise cleaning, and remote operation, leading to consistent and high-quality cleaning results. Additionally, IoT-based solutions offer scalability, transparency, and the potential for revolutionizing maintenance practices in various industries, contributing to sustainable and clean energy systems.
What is solar panel?
5 answers
A solar panel is a device that converts sunlight into electricity through the photovoltaic effect. Various types of solar panel arrangements exist, such as flexible circuit board-based modules with solar cells and bypass diodes for efficient energy conversion, vertically stacked panels with a coupling mechanism for optimal solar exposure, and solar panel columns incorporating parabolic mirrors and optical fibers for enhanced light absorption. Solar panel assemblies may include concentrated photovoltaic cells for direct light conversion and photovoltaic cells for indirect light conversion. Additionally, solar panel modules can feature rain-proof designs with upper glass cover plates and installation grooves for maintenance ease and protection against external forces, enhancing their durability and lifespan.
What is the research point on the curtailment of renewable energies in the existing literature?
10 answers
The existing literature on the curtailment of renewable energies highlights several critical research points, focusing on the causes, impacts, and mitigation strategies of curtailment across different regions and energy systems. One primary concern is the operational and technical constraints within power systems that lead to renewable energy curtailment, as seen in the All-Island power system (AIPS) of Ireland and Northern Ireland, where a significant correlation between installed wind capacity and curtailment levels was observed, primarily driven by operational constraints. Similarly, in China, the rapid expansion of the wind energy business has introduced the problem of wind power delays, emphasizing the need to address the causes and obstacles of wind power curtailment. In Korea, the sharp increase in renewable energy, particularly on Jeju Island, has necessitated the implementation of curtailment measures, despite efforts to utilize electric vehicle batteries as flexible resources to absorb surplus power. This situation is mirrored in the broader challenges of integrating solar energy, where dependency on weather and the lack of storage infrastructure necessitate energy curtailment during peak production hours. Various studies propose solutions to mitigate curtailment, such as optimizing curtailment methods to improve the accuracy of power supplied from the distribution network, co-optimizing generation and curtailment strategies to minimize operational costs while ensuring system security, and employing sensitivity analysis to determine output curtailment ratios for thermal and renewable energies to mitigate grid congestion. Moreover, forecasting models have been developed to predict short-term curtailment and congestion in distribution grids, offering valuable insights for improving curtailment strategies and grid management. These research points collectively underscore the complexity of renewable energy curtailment, highlighting the need for innovative solutions to optimize the integration of renewable energies into existing power systems while minimizing energy waste and ensuring grid stability.
What are the rebound effect of building retrofits in the context of carbon emission and embodied carbon?
5 answers
Building retrofits can lead to significant reductions in carbon emissions and embodied carbon. Retrofitting Indian residential buildings can achieve up to a 20% reduction in life cycle energy emissions, emphasizing the potential for environmental benefits. In China, retrofitting old buildings resulted in an 80.64% reduction in annual carbon emissions during the use phase, with a comprehensive carbon emission reduction of 71.43% and a static payback period of 2.05 years for carbon increments. Sustainable retrofit methods in Australia show that upgrading with insulation and double-glazed windows can lead to faster environmental benefits over financial benefits, especially in older single detached dwellings. Combining Building Information Modeling (BIM) with renewable energy technologies can achieve zero carbon targets in building retrofit projects, significantly reducing energy consumption and carbon emissions. Retrofit projects cost 30% less than new projects on average, with retrofit projects offering 86% greater cost-benefit values than new projects, showcasing the potential for promoting green building movements.
Why is solar the best renewable resource over other renewable resources?
4 answers
Solar energy stands out as the best renewable resource due to its abundance, cost-effectiveness, sustainability, and efficiency compared to other alternatives. Solar energy is freely available, making it a promising solution for long-term energy needs. It is considered the most abundant and clean renewable energy source, capable of meeting the world's energy demands efficiently. The advancements in solar photovoltaic technology have made it a superior choice, with continuous research and development enhancing its power generation capabilities and environmental aspects. Solar energy's benefits include its capacity, accessibility, and overall effectiveness in addressing global energy demands, making it a preferred option over other renewable sources. Additionally, the solar industry's steady growth worldwide highlights its pivotal role in economic development and sustainability.