scispace - formally typeset
Search or ask a question

Which type of solar cooker is responsible for greenhouse effect? 

Answers from top 18 papers

More filters
Papers (18)Insight
The present solar cooker has been found as first kind of SBC which can efficiently perform on forced convection in any type of climatic conditions.
The solar cooker proved to be reliable, trouble-free, and efficient.
It is an improvement on the solar cooker SC-1 earlier developed at the institute.
Preliminary results show that different types of motivational factors play an important role for adopting this type of solar cooker.
It was found that the solar box cooker with phase change material could be effectively utilized to cook food during off-peak hours of solar radiation.
This paper presents the design, development and on-field studies of a low cost solar cooker which can act as a promising solution towards reducing the adverse impacts of indoor air pollution on the health of women and children of developing countries.
The building parameters then have an important effect on the solar energy utilization and the temperatures in the greenhouse.
The short payback period shows that the use of the novel non-tracking solar cooker is economical.
The results clearly indicate that absorber plate temperature in conventional solar cooker has a notable decreasing tendency toward sunset, which totally affects the overall thermal performance of the system.
The study reveals that the temperature profiles of the developed solar cooker are slightly better than the commercially available fibre body solar cooker.
Introducing the oven type concept as an alternative approach for collecting the concentrated solar energy would drastically boost the overall cooker efficiency.
The solar cooker was found to be useful in cooking a variety of foods.
The experimental studies prove that the solar cooker effect really exists and should not be overlooked.
The solar cooker is inexpensive to fabricate and simple and safe to use.
Therefore, the use of a solar cooker is economical.
Those should target the modeling and design the best shape of solar greenhouse for all agricultural areas to receive the maximum solar radiation and decrease the need of fossil fuels.
This mechanism facilitates the recording of temperature patterns that identify the functioning of the solar cooker.
The payback period shows that use of the solar cooker is economical.

Related Questions

What is solar cooker?4 answersA solar cooker is a device that uses solar energy to heat food for cooking purposes. It is designed to absorb solar radiant energy and convert it into thermal energy, which is then transferred to the food vessel. Solar cookers are used to reduce the usage of conventional fuels and improve the quality of food. They can be lightweight and energy-efficient, incorporating features such as thermal contact resistance to enhance heat transfer. Some solar cookers also utilize photovoltaic technology and nichrome heating elements to provide an electrical emergency power supply and cook food even on cloudy days and nights. Different designs of solar cookers are available, and some incorporate heat storage materials to enable cooking during off sunshine hours. Solar cookers are considered an excellent alternative for low-income families or those living in rural communities, as they make use of free solar radiation.
How can solar energy be harnessed to cook food in an eco-friendly way?5 answersSolar energy can be harnessed to cook food in an eco-friendly way by using solar cookers that utilize the thermal energy obtained from the sun to cook, boil, fry, or roast foods. These cookers can be designed and fabricated with various materials and technologies to improve their performance. For example, one study used a phase change material (PCM) as a heat storage tank in an urban solar food cooking system, which allowed for cooking twice a day and reduced cooking time compared to other solar cookers. Another study proposed the use of affordable panel solar cookers made from waste materials such as cardboard and potato chips metallized plastic bags, providing a low-cost and sustainable option for underprivileged communities. Additionally, an improved solar cooker was developed using transparent and opaque materials to increase input solar radiation and reduce cooking time. Overall, solar cookers offer a renewable and sustainable means of cooking food while saving energy and reducing pollution.
What is responsible for greenhouse effect in solar cooker?8 answers
Which part of solar cooker is responsible for greenhouse effect?9 answers
Which part of solar cooker is responsible for greenhouse gas effect?10 answers
Which part of solar cooker is responsible for greenhouse gas?18 answers

See what other people are reading

What is the typical efficiency of a home central heating system using a gas boiler?
5 answers
The typical efficiency of a home central heating system using a gas boiler can be influenced by various factors. Research indicates that oversizing of boilers with respect to space heating can lead to increased cycling behavior and a consequent efficiency penalty of 6-9%. Additionally, the presence of micro bubbles in central heating systems due to untreated tap water and air leakage can result in inefficiencies, such as reduced heat transfer in radiators, increasing the carbon footprint of the system. Comparing different types of boilers, it was found that gas boilers exhibit the highest efficiency, followed by oil burning boilers, with coal boilers having the lowest efficiency levels. Implementing energy-efficient measures, such as addressing oversizing issues and improving system deaeration, can enhance the overall efficiency of gas boiler central heating systems in homes.
Why saltwater is not enough to produce electricity?
5 answers
Saltwater is a viable source for electricity generation, but there are limitations to its efficiency. Research indicates that while saltwater can produce electricity through processes like electrolysis, the energy efficiency and practical potential are hindered by factors such as low energy efficiency, anode corrosion due to chlorine chemistry, and high electricity expenses. Additionally, the correlation between salinity and electric voltage is not well-documented, making it challenging to optimize the electricity generation process from saltwater. Despite the advantages of using saltwater for electricity generation, such as environmental friendliness and low cost, there are technical challenges that need to be addressed to enhance its effectiveness as a sustainable energy source.
Why saltwater cannot generate power to light a bulb?
5 answers
Saltwater can indeed generate power to light a bulb, as evidenced by various studies exploring saltwater energy generation. Saltwater energy can be harnessed through different methods such as utilizing the conductive nature of saltwater to generate electricity or employing chemical reactions from saltwater as a source of electricity. For instance, the development of a Salt Based Light demonstrates the feasibility of generating electricity from saltwater using chemical reactions, providing an alternative energy source for lighting. Additionally, a seawater energy power generation device has been designed to efficiently convert seawater energy into electric energy, highlighting the potential of saltwater as a renewable energy source. Therefore, saltwater has the capability to generate power for lighting bulbs through innovative technologies and methods.
How can the applicability and transferability of switchable insulation research be improved for different building types and climates?
4 answers
To enhance the applicability and transferability of switchable insulation systems (SIS) across various building types and climates, several key strategies can be implemented. Firstly, optimizing the placement and parameters of wall layers can significantly increase energy savings for both heating and cooling in different European climates. Additionally, incorporating dynamic insulation systems (DIS) with phase change materials (PCM) can create a composite structure with switchable thermal resistance, effectively addressing overheating issues in buildings. Furthermore, utilizing Genetic Algorithm (GA) based optimal controls for switchable transparent insulation systems (STIS) in smart windows can lead to substantial energy savings and peak demand reductions in US residential buildings, especially in hot climates like Phoenix, AZ. Lastly, exploring switchable vacuum insulation panels with materials like silica gel and helium can provide a new type of insulation that can be switched on and off based on insulation requirements, offering potential benefits for different building scenarios.
How is the thermal runaway from a sodium-ion cell?
4 answers
Thermal runaway in sodium-ion cells, like in lithium-ion cells, involves self-sustaining reactions at elevated temperatures leading to catastrophic failure. Studies comparing thermal runaway in Li-ion and Na-ion cells show that Na-ion cells exhibit slower self-heating rates and thermal runaway initiation at higher temperatures. Vent gas analysis during thermal abuse of Na-ion cells reveals fumes mainly composed of electrolyte compounds, similar to LiFePO4 chemistries. Understanding the heat generation sources during thermal runaway is crucial, with oxidation-reduction reactions between cathode and anode identified as a major heat source. Mathematical models play a key role in studying thermal runaway, focusing on reactions like SEI decomposition, electrolyte decomposition, and cathode decomposition. Overall, Na-ion cells demonstrate different thermal runaway characteristics compared to Li-ion cells, emphasizing the importance of safety considerations in battery technology development.
How can disused chimneys be converted into wind towers?
10 answers
Disused chimneys offer a unique opportunity for repurposing into wind towers, leveraging existing structures for renewable energy generation. Various innovative approaches have been proposed to convert these unused chimneys into functional wind power generators, each capitalizing on the structural integrity and height of chimneys to harness wind energy efficiently. One method involves using the chimney as a support structure for a wind power generating apparatus, where a heat exchanger is located outside the chimney to increase energy density by utilizing the waste heat from a heating source facility. This system also includes a wind power turbine generator installed around the air injection hole of an air duct, which is communicated in the chimney horizontally. Similarly, the concept of mounting a wind turbine on the roof of a building, replacing an existing chimney, allows for the direct conversion of wind energy into electricity, which can be stored or fed into the national grid. Another approach proposes the use of abandoned chimneys as solar chimneys, incorporating a glasshouse constructed around its foot to generate an updraft exhaust, thereby enhancing the chimney's ability to drive turbines through increased airflow. Additionally, the structural adaptation of chimneys for wind energy conversion can involve reinforcing the chimney with a series of longitudinal reinforcement elements to support the added load of wind conversion equipment. Further innovations include the adaptation of shut-down concrete power station or industrial chimneys as towers for high-powered electric wind converters. This involves modifying the chimney to accommodate over-mounted rotor blades and fitting a steel base for the wind converter, ensuring the blades can pass the chimney at a predetermined distance. Moreover, chimneys can be repurposed as support platforms for advertising and fireworks, turning them into landmark buildings while also serving as bases for wind energy conversion. Lastly, the design of a wind electric power generation chimney, which utilizes both horizontal wind and ascending current to generate electricity, demonstrates a practical approach to enhancing the efficiency of wind energy conversion using modified chimney structures. These diverse methods highlight the potential of disused chimneys in contributing to sustainable energy solutions by converting them into wind towers, utilizing innovative designs and structural modifications to harness wind power effectively.
How is nairobi affected by climate change?
5 answers
Nairobi is significantly impacted by climate change, with various studies highlighting different aspects of this issue. Residents in informal settlements like Mukuru in Nairobi are experiencing the health impacts of climate change, with a high level of awareness and concern regarding these effects. The city's rapid urban development and technological advancements present opportunities for enhancing urban climate change resilience, although challenges remain in fully integrating climate change considerations into development strategies. Furthermore, the tourism sector in Kenya, including Nairobi, is highly sensitive to climate change due to its reliance on climate as a resource, facing challenges such as vulnerability and adaptation gaps. Implementing innovative solutions like solar streetlights with energy-efficient systems can contribute to reducing greenhouse gas emissions and positively impacting climate change mitigation efforts in Nairobi.
How does storage condition and reheating affect the glycemic index of rice?
5 answers
Storage conditions and reheating significantly impact the glycemic index of rice. Cold storage of cooked rice reduces starch digestibility, with parboiled rice showing a 40% reduction compared to other varieties. Reheating cooked rice after cold storage at 4°C for 24 hours lowers the glycemic load, especially for parboiled rice, potentially reducing the risk of type 2 and gestational diabetes. Additionally, reheated parboiled rice has the lowest starch digestibility and glycemic impact, making it a healthier alternative for staple meals. Traditional processing and storage of rice at room temperature for 12 hours increase the glycemic index, highlighting the importance of proper storage and reheating methods to control blood glucose levels.
How does green house nursery help the plant to extreme heat?
5 answers
A greenhouse nursery provides a controlled environment that helps plants cope with extreme heat through various innovative methods. These include utilizing heat preservation layers within the greenhouse walls, such as embedding pipeline layers for hot water circulation. Additionally, air charging systems with heat preservation films and air bags can create an effective additional heat preservation layer, reducing labor intensity and costs in extremely cold areas. Furthermore, the use of selective collectors and heat storage tanks allows for optimal temperature maintenance for plant growth and fish production, ensuring stable growth conditions and avoiding excessive temperature fluctuations. Novel fan-pad systems with air distribution ducts alongside crop rows offer efficient cooling under extreme weather conditions, preventing horizontal thermal gradients and enhancing plant productivity. Overall, these greenhouse technologies contribute to energy conservation, environmental protection, and healthy plant growth in challenging heat conditions.
What is the nutritional value of broccoli when cooked in a pot?
5 answers
When broccoli is cooked in a pot, its nutritional value undergoes changes based on the cooking method. Different studies have shown that cooking techniques like boiling can lead to significant reductions in certain nutrients. For instance, boiling broccoli results in a decrease in total phenol, phytate, alkaloid, and trypsin inhibitor content. Additionally, the cooking method can impact the retention of essential nutrients like potassium and vitamin C, with steam cooking and combined oven techniques being more effective in preserving these nutrients compared to other methods. Furthermore, the choice of cooking method influences the retention of health-promoting compounds like glucosinolates, with steaming being highlighted as the method that leads to the lowest loss of total glucosinolates. Therefore, when cooking broccoli in a pot, it is essential to consider the impact of the cooking method on its nutritional content.
How have advancements in electronic solar technologies impacted the design and enhancement of solar power systems?
4 answers
Advancements in electronic solar technologies have significantly influenced the design and enhancement of solar power systems. Research highlights the importance of artificial intelligence-based maximum power point tracking algorithms for improved circuit efficiency. Additionally, the utilization of maximum power point tracking (MPPT) in solar photovoltaic systems has been crucial in overcoming the non-linear behavior of photovoltaic panels, leading to enhanced system performance. Furthermore, the industry's focus on quality assurance during manufacturing and installation processes underscores the need for continuous development and implementation of cutting-edge technologies in solar panel design. These advancements, coupled with innovative materials and manufacturing techniques, have paved the way for more efficient and sustainable solar energy utilization across various applications and scales.