Which VLAN does the mgt0 interface of an AP use to communicate with other access points using our control protocols?
Answers from top 9 papers
More filters
| Papers (9) | Insight |
|---|---|
22 Citations | In this letter, we propose a medium access control (MAC) protocol, which allows more nodes to opportunistically transmit packets even though they do not exchange any control packets for transmission coordination if the AP can concurrently receive more packets due to the multi-packet reception capability. |
27 Dec 2006 7 Citations | Prior knowledge of the neighbouring Access points (AP) can help in reducing the number of channels to be scanned and thus can assist a mobile station (STA) in making a fast and accurate handoff decision. |
01 Dec 2016 4 Citations | The simulation results demonstrate that significant performance enhancement can be achieved in the current WLANs by an access point (AP) with STR capability and a properly designed MAC protocol. |
18 Sep 2006 | In these large WLAN networks, RRM (Radio Resource Management) is necessary for the efficient use of radio resource and also for load balancing among APs (Access Point) Since, in IEEE802.11, STA (Station) has the right to select an AP with which it will associate, AP selection mechanism implemented in STA is important for RRM. |
45 Citations | Further, it supports the scenario where access points use intermediate mobile terminals and ad-hoc networking to extend their service coverage. |
| Network MIMO (netMIMO) can potentially meet the demand by enabling concurrent uplink transmissions to an AP cluster (APC) comprised of multiple access points. | |
20 Oct 2003 | The new control algorithm only requires simple extensions to the MAC layer of access points and is compatible with the MAC layer defined in IEEE 802.11 standard. |
21 Mar 2004 46 Citations | Unlike conventional wired access points, in this type of system, power saving on the AP itself is an important objective. |
13 Jun 2005 18 Citations | We also propose a simple inter-technology handoff technique using these interface switching mechanisms to enable transparent roaming across these access networks. |
Related Questions
What are the different types of WLAN architectures used in corporate environments?5 answersIn corporate environments, various WLAN architectures are utilized to address security and mobility challenges. One prevalent architecture involves implementing IPsec protocols for secure wireless access, enhancing authentication, access control, confidentiality, and key management. Another approach focuses on seamless secure mobile networking across different networks, including office WLAN, home WLAN, public WLAN, and cellular networks, using Internet Roaming Clients (IRCs) and a Secure Mobility Gateway (SMG). Additionally, a proposed architecture controls access to corporate WLANs based on user privileges and location, leveraging components like VPNs and firewalls to reduce security risks. Furthermore, to ensure quality of service for real-time applications, a multilayered security architecture with Cisco fast secure roaming is suggested, addressing handoff delays during authentication methods like EAP-TLS and LEAP.
How does the PHY and MAC layer work on 10gbps fiber-optic interfaces?5 answersThe PHY and MAC layers work on 10 Gbps fiber-optic interfaces by implementing various techniques and components. The MAC layer handles the media access control and physical coding sublayer, while the PHY layer is responsible for transmitting the signal representing the data. The MAC layer connects to the PHY layer through interfaces such as a parallel data bus or a 100 gigabit attachment unit interface. The PHY layer uses technologies like SSMII to enable communication with the MAC layer via fiber links. This allows for full duplex operation and separation of the MAC and PHY layers at greater distances. The MAC layer can communicate with multiple PHY layer interface ports serially, and the data is encoded along with frame sync and clock signals for transmission. Additionally, the MAC layer can initiate PHY register transactions for read and write operations on the PHY registers.
How mac is designed in 802.11p?5 answersThe MAC layer in the IEEE 802.11p standard is designed to address the challenges of vehicular networks, such as fast changing topologies, short connection lifetimes, and high node density. The MAC protocol in 802.11p grants all nodes equal opportunity to acquire the channel, which can lead to lower bit-rate nodes occupying the channel for a fair amount of time, affecting the overall network performance. To improve network throughput and decrease the probability of collisions, a new MAC protocol is proposed that guarantees nodes with acquired channel a firm priority over other nodes for a fixed amount of time, using the TXOP concept. Additionally, the MAC protocol sets the Contention Window (CW) width wider than the standard and modulates the continuous transmitting threshold value based on channel acquired time, further enhancing network performance.
What are the benefits of using APCA over traditional port information and control systems?3 answersUsing Attribute-Based Access Control as a cloud service (ABACaaS) offers several benefits over traditional port information and control systems. ABACaaS allows organizations to integrate ABAC into their own environment, regardless of the platform they operate in. This eliminates the need for ab initio deployment of ABAC, which can be both time and cost intensive. ABACaaS provides both Software as a Service (SaaS) and Platform as a Service (PaaS) instances, offering flexibility and scalability. Additionally, ABACaaS has shown good performance in terms of its execution time and resource utilization. By leveraging ABACaaS, organizations can enhance their access control capabilities, improve security, and reduce the complexity and cost associated with traditional access control models.
What port does VNC server run on?9 answers
Which three commands should you use to configure data and voice VLAN on the same interface?8 answers