Topic
Alloy
About: Alloy is a research topic. Over the lifetime, 171884 publications have been published within this topic receiving 1719420 citations. The topic is also known as: alloys.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, a long period stacking (LPS) structure with 18R-type was observed in Mg97Zn1Y2 (at%) alloy prepared by Cu-mold casting and induction melting methods.
444 citations
TL;DR: In this article, a ceramic-reinforced aluminum matrix composite is formed by contacting a molten aluminum-magnesium alloy with a permeable mass of ceramic material in the presence of a gas comprising from about 10 to 100% nitrogen, by volume, balance non-oxidizing gas, e.g., hydrogen or argon.
Abstract: A ceramic-reinforced aluminum matrix composite is formed by contacting a molten aluminum-magnesium alloy with a permeable mass of ceramic material in the presence of a gas comprising from about 10 to 100% nitrogen, by volume, balance non-oxidizing gas, e.g., hydrogen or argon. Under these conditions, the molten alloy spontaneously infiltrates the ceramic mass under normal atmospheric pressures. A solid body of the alloy can be placed adjacent a permeable bedding of ceramic material, and brought to the molten state, preferably to at least about 700° C., in order to form the aluminum matrix composite by infiltration. In addition to magnesium, auxiliary alloying elements may be employed with aluminum. The resulting composite products may contain a discontinuous aluminum nitride phase in the aluminum matrix and/or an aluminum nitride external surface layer.
443 citations
TL;DR: A ferrous polycrystalline, high-strength, shape-memory alloy exhibiting a superelastic strain of more than 13%, with a tensile strength above 1 gigapascal, which is almost twice the maximum supeRELastic strain obtained in the Ni-Ti alloys.
Abstract: Shape-memory alloys, such as Ni-Ti and Cu-Zn-Al, show a large reversible strain of more than several percent due to superelasticity. In particular, the Ni-Ti-based alloy, which exhibits some ductility and excellent superelastic strain, is the only superelastic material available for practical applications at present. We herein describe a ferrous polycrystalline, high-strength, shape-memory alloy exhibiting a superelastic strain of more than 13%, with a tensile strength above 1 gigapascal, which is almost twice the maximum superelastic strain obtained in the Ni-Ti alloys. Furthermore, this ferrous alloy has a very large damping capacity and exhibits a large reversible change in magnetization during loading and unloading. This ferrous shape-memory alloy has great potential as a high-damping and sensor material.
440 citations
TL;DR: In this article, the effects of different alloying elements on the microstructure and mechanical properties are described considering their strengthening mechanisms, e.g. grain refinement, precipitation and texture hardening effect.
439 citations
TL;DR: In this article, annealing of the Gd5Ge2Si2 can promote remarkable values for the magnetocaloric effect in comparison to those obtained for the alloy with high pure Gd.
Abstract: Gd5(Ge1-xSix), x < 4 based alloys are potential candidates for magnetic refrigeration in the range ~20 - ~290 K. However, one of the greatest obstacles for the use of that technology in large scale is the utilization of high pure Gd metal (99.99 wt. (%)) to produce the GdGeSi alloys, since the impurity elements decrease the intensity of the magnetocaloric effect (EMC)1. In this work, we prove that annealing of the Gd5Ge2Si2 can promote remarkable values for the EMC in comparison to those obtained for the alloy with high pure Gd. Also, the as cast alloy and the annealed alloy are not monophasic, but have at least two crystalline phases in their microstructure. Results for X-ray analysis, optical and electronic microscopy and magnetization measurements are reported.
438 citations