Topic
Antimony
About: Antimony is a research topic. Over the lifetime, 11450 publications have been published within this topic receiving 155660 citations. The topic is also known as: Sb & element 51.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, the Warburg impedance coefficient ( σ w ) was 1163.265 ǫ cm 2 s −0.5 for the tin borophosphate compounds doped with antimony, and this was the lowest value compared to those of the other samples.
144 citations
•
26 Dec 1967TL;DR: A RADIATION SENSITIVE COMPOUND COMPRISES a TETRASUBstituted BORATE ANION and an ORGANIC CATION CONTAINING AN ATOM SELECTED from the Group CONSISTING of NITROGEN, ARSENIC, TIN, ANTIMONY, SULFUR, IODINE, PHOSPHORUS, OXYGEN, TITANIUM, PALLADIUM, CHROMIUM and COBALT as discussed by the authors.
Abstract: A RADIATION SENSITIVE COMPOUND COMPRISES A TETRASUBSTITUTED BORATE ANION AND AN ORGANIC CATION CONTAINING AN ATOM SELECTED FROM THE GROUP CONSISTING OF NITROGEN, ARSENIC, TIN, ANTIMONY, SULFUR, IODINE, PHOSPHORUS, OXYGEN, TITANIUM, PALLADIUM, CHROMIUM AND COBALT. THESE COMPOUNDS CAN BE SPECTRALLY SENSITIZED AND CAN BE USED IN PHOTORESISTS AND FOR LITHOGRAPHY.
143 citations
••
TL;DR: In this article, the effects of antimony trioxide plus sufficient chlorine were compared in polyethylene, and it was shown that the maximum effect requires about 0·01 antimony atoms per C2 group in the polyethylenes and develops just as well when chlorine/antimony is six as when it is twenty.
143 citations
••
TL;DR: In this article, an antimony nanoparticle modified boron doped diamond (Sb-BDD) electrode was used for simultaneous electroanalytical determination of Pb2+ and Cd2+ by linear sweep anodic stripping voltammetry (LSASV).
Abstract: We report the simultaneous electroanalytical determination of Pb2+ and Cd2+ by linear sweep anodic stripping voltammetry (LSASV) using an antimony nanoparticle modified boron doped diamond (Sb-BDD) electrode. Sb deposition was performed in situ with the analytes, from a solution of 1 mg L-1 SbCl3 in 0.1 M HCl (pH 1). Pb2+ inhibited the detection of Cd2+ during simultaneous additions at the bare BDD electrode, whereas in the presence of antimony, both peaks were readily discernable and quantifiable over the linear range 50-500 mu g L-1. Ex situ AFM characterization of the BDD electrode after Sb deposition showed a distribution of nanoparticles ranging from 3 to 110 nm in height, and 8.5 to 506.5 nm in diameter across the electrode surface, which corresponded well to the low mass of Sb expected on the BDD with respect to the voltammetric data.
143 citations
••
TL;DR: The antimony film carbon paste electrode (SbF-CPE) as discussed by the authors was used as a "mercury-free" electrochemical sensor for measuring some selected trace heavy metals.
143 citations