scispace - formally typeset
Search or ask a question
Topic

Antimony telluride

About: Antimony telluride is a research topic. Over the lifetime, 476 publications have been published within this topic receiving 23241 citations.


Papers
More filters
Journal ArticleDOI
02 May 2008-Science
TL;DR: Electrical transport measurements, coupled with microstructure studies and modeling, show that the ZT improvement is the result of low thermal conductivity caused by the increased phonon scattering by grain boundaries and defects, which makes these materials useful for cooling and power generation.
Abstract: The dimensionless thermoelectric figure of merit (ZT) in bismuth antimony telluride (BiSbTe) bulk alloys has remained around 1 for more than 50 years. We show that a peak ZT of 1.4 at 100°C can be achieved in a p-type nanocrystalline BiSbTe bulk alloy. These nanocrystalline bulk materials were made by hot pressing nanopowders that were ball-milled from crystalline ingots under inert conditions. Electrical transport measurements, coupled with microstructure studies and modeling, show that the ZT improvement is the result of low thermal conductivity caused by the increased phonon scattering by grain boundaries and defects. More importantly, ZT is about 1.2 at room temperature and 0.8 at 250°C, which makes these materials useful for cooling and power generation. Cooling devices that use these materials have produced high-temperature differences of 86°, 106°, and 119°C with hot-side temperatures set at 50°, 100°, and 150°C, respectively. This discovery sets the stage for use of a new nanocomposite approach in developing high-performance low-cost bulk thermoelectric materials.

4,695 citations

BookDOI
14 Jul 1995
TL;DR: In this article, Rowe et al. proposed a method for reducing the thermal conductivity of a thermoelectric generator by reducing the carrier concentration of the generator, which was shown to improve the generator's performance.
Abstract: Introduction, D.M. Rowe General Principles and Theoretical Considerations Thermoelectric Phenomena, D.D. Pollock Coversion Efficiency and Figure-of-Merit, H.J. Goldsmid Thermoelectric Transport Theory, C.M. Bhandari Optimization of Carrier Concentration, C.M. Bhandari and D.M. Rowe Minimizing the Thermal Conductivity, C.M. Bhandari Selective Carrier Scattering in Thermoelectric Materials, Y.I. Ravich Thermomagnetic Phenomena, H.J. Goldsmid Material Preparation Preparation of Thermoelectric Materials from Melts, A. Borshchevsky Powder Metallurgy Techniques, A.N. Scoville PIES Method of Preparing Bismuth Alloys, T. Ohta and T. Kajikawa Preparation of Thermoelectric Materials by Mechanical Alloying, B.A. Cook, J.L. Harringa, and S.H. Han Preparation of Thermoelectric Films, K. Matsubara, T. Koyanagi, K. Nagao, and K. Kishimoto Measurement of Thermoelectric Properties Calculation of Peltier Device Performance, R.J. Buist Measurements of Electrical Properties, I.A. Nishida Measurement of Thermal Properties, R. Taylor Z-Meters, H.H. Woodbury, L.M. Levinson, and S. Lewandowski Methodology for Testing Thermoelectric Materials and Devices, R.J. Buist Thermoelectric Materials Bismuth Telluride, Antimony Telluride, and Their Solid Solutions, H. Scherrer and S. Scherrer Valence Band Structure and the Thermoelectric Figure-of-Merit of (Bi1-xSbx)Te3 Crystals, M. Stordeur Lead Telluride and Its Alloys, V. Fano Properties of the General Tags System, E.A. Skrabek and D.S. Trimmer Thermoelectric Properties of Silicides, C.B. Vining Polycrystalline Iron Disilicide as a Thermoelectric Generator Material, U. Birkholz, E. Gross, and U. Stohrer Thermoelectric Properties of Anisotropic MnSi1.75 , V.K. Zaitsev Low Carrier Mobility Materials for Thermoelectric Applications, V.K. Zaitsev, S.A. Ktitorov, and M.I. Federov Semimetals as Materials for Thermoelectric Generators, M.I. Fedorov and V.K. Zaitsev Silicon Germanium, C.B. Vining Rare Earth Compounds, B.J. Beaudry and K.A. Gschneidner, Jr. Thermoelectric Properties of High-Temperature Superconductors, M. Cassart and J.-P. Issi Boron Carbides, T.L. Aselage and D. Emin Thermoelectric Properties of Metallic Materials, A.T. Burkov and M.V. Vedernikov Neutron Irradiation Damage in SiGe Alloys, J.W. Vandersande New Materials and Performance Limits for Thermoelectric Cooling, G.A. Slack Thermoelectric Generation Miniature Semiconductor Thermoelectric Devices, D.M. Rowe Commercially Available Generators, A.G. McNaughton Modular RTG Technology, R.F. Hartman Peltier Devices as Generators, G. Min and D.M. Rowe Calculations of Generator Performance, M.H. Cobble Generator Applications Terrestrial Applications of Thermoelectric Generators, W.C. Hall Space Applications, G.L. Bennett SP-100 Space Subsystems, J.F. Mondt Safety Aspects of Thermoelectrics in Space, G.L. Bennett Low-Temperature Heat Conversion, K. Matsuura and D.M. Rowe Thermoelectric Refrigeration Introduction, H.J. Goldsmid Module Design and Fabrication, R. Marlow and E. Burke Cooling Thermoelements with Superconducting Leg, M.V. Vedernikov and V.L. Kuznetsov Applications of Thermoelectric Cooling Introduction, H.J. Goldsmid Commercial Peltier Modules, K.-I. Uemura Thermoelectrically Cooled Radiation Detectors, L.I. Anatychuk Reliability of Peltier Coolers in Fiber-Optic Laser Packages, R.M. Redstall and R. Studd Laboratory Equipment, K.-I. Uemura Large-Scale Cooling: Integrated Thermoelectric Element Technology, J.G. Stockholm Medium-Scale Cooling: Thermoelectric Module Technology, J.G. Stockholm Modeling of Thermoelectric Cooling Systems, J.G. Stockholm

4,192 citations

Journal ArticleDOI
03 Apr 2015-Science
TL;DR: A dramatic improvement of efficiency is shown in bismuth telluride samples by quickly squeezing out excess liquid during compaction, which presents an attractive path forward for thermoelectrics.
Abstract: The widespread use of thermoelectric technology is constrained by a relatively low conversion efficiency of the bulk alloys, which is evaluated in terms of a dimensionless figure of merit ( zT ). The zT of bulk alloys can be improved by reducing lattice thermal conductivity through grain boundary and point-defect scattering, which target low- and high-frequency phonons. Dense dislocation arrays formed at low-energy grain boundaries by liquid-phase compaction in Bi 0.5 Sb 1.5 Te 3 (bismuth antimony telluride) effectively scatter midfrequency phonons, leading to a substantially lower lattice thermal conductivity. Full-spectrum phonon scattering with minimal charge-carrier scattering dramatically improved the zT to 1.86 ± 0.15 at 320 kelvin (K). Further, a thermoelectric cooler confirmed the performance with a maximum temperature difference of 81 K, which is much higher than current commercial Peltier cooling devices.

1,429 citations

Journal ArticleDOI
TL;DR: In this paper, the same ball milling and hot press technique was used to obtain a peak ZT of about 1.3 in the temperature range of 75 and 100 °C.
Abstract: By ball milling alloyed bulk crystalline ingots into nanopowders and hot pressing them, we had demonstrated high figure-of-merit in nanostructured bulk bismuth antimony telluride. In this study, we use the same ball milling and hot press technique, but start with elemental chunks of bismuth, antimony, and tellurium to avoid the ingot formation step. We show that a peak ZT of about 1.3 in the temperature range of 75 and 100 °C has been achieved. This process is more economical and environmentally friendly than starting from alloyed bulk crystalline ingots. The ZT improvement is caused mostly by the lower thermal conductivity, similar as the case using ingot. Transmission electron microscopy observations of the microstructures suggest that the lower thermal conductivity is mainly due to the increased phonon scattering from the increased grain boundaries of the nanograins, precipitates, nanodots, and defects. Our material also exhibits a ZT of 0.7 at 250 °C, similar to the value obtained when ingot was used. This study demonstrates that high ZT values can be achieved in nanostructured bulk materials with ball milling elemental chunks, suggesting that the approach can be applied to other materials that are hard to be made into ingot, in addition to its advantage of lower manufacturing cost.

517 citations


Network Information
Related Topics (5)
Oxide
213.4K papers, 3.6M citations
80% related
Thin film
275.5K papers, 4.5M citations
80% related
Silicon
196K papers, 3M citations
79% related
Carbon nanotube
109K papers, 3.6M citations
79% related
Graphene
144.5K papers, 4.9M citations
78% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
202132
202029
201939
201831
201732
201626