Arc welding

About: Arc welding is a(n) research topic. Over the lifetime, 25393 publication(s) have been published within this topic receiving 168182 citation(s).

A new finite element model for welding heat sources

Abstract: A mathematical model for weld heat sources based on a Gaussian distribution of power density in space is presented. In particular a double ellipsoidal geometry is proposed so that the size and shape of the heat source can be easily changed to model both the shallow penetration arc welding processes and the deeper penetration laser and electron beam processes. In addition, it has the versatility and flexibility to handle non-axisymmetric cases such as strip electrodes or dissimilar metal joining. Previous models assumed circular or spherical symmetry. The computations are performed with ASGARD, a nonlinear transient finite element (FEM) heat flow program developed for the thermal stress analysis of welds.* Computed temperature distributions for submerged arc welds in thick workpieces are compared to the measured values reported by Christensen1 and the FEM calculated values (surface heat source model) of Krutz and Segerlind.2 In addition the computed thermal history of deep penetration electron beam welds are compared to measured values reported by Chong.3 The agreement between the computed and measured values is shown to be excellent.

Wire + Arc Additive Manufacturing

Abstract: Depositing large components (>10 kg) in titanium, aluminium, steel and other metals is possible using Wire + Arc Additive Manufacturing. This technology adopts arc welding tools and wire as feedstock for additive manufacturing purposes. High deposition rates, low material and equipment costs, and good structural integrity make Wire+Arc Additive Manufacturing a suitable candidate for replacing the current method of manufacturing from solid billets or large forgings, especially with regards to low and medium complexity parts. A variety of components have been successfully manufactured with this process, including Ti–6Al–4V spars and landing gear assemblies, aluminium wing ribs, steel wind tunnel models and cones. Strategies on how to manage residual stress, improve mechanical properties and eliminate defects such as porosity are suggested. Finally, the benefits of non-destructive testing, online monitoring and in situ machining are discussed.

The Physics of Welding

Abstract: Greater understanding of the physics of welding is leading to improved application and control of welding processes. Further gains in welding productivity could follow. Electric arc welding, high energy density welding and future developments are described

Recent developments in explosive welding

Abstract: Explosion welding (EXW) is one of the joining methods consisting of a solid state welding process in which controlled explosive detonation on the surface of a metal. During the collision, a high velocity jet is produced to remove away the impurities on the metal surfaces. Flyer plate collides with base plate resulting in a bonding at the interface of metals. The metal plates are joined at an internal point under the influence of a very high pressure and causes considerable local plastic deformation at the interface in which metallurgical bonding occurs in nature and even stronger than the parent metals. Similar and dissimilar materials can be joined by explosive welding. In this paper, after detection the theories of welding and wave formation, experimental research and numerical studies on explosive welding are reviewed for the last four decades. Also, future developments in explosive welding are predicted and criticized in an outlook.

Welding Metallurgy of Stainless Steels

Abstract: Contents: Significance of Constitution Diagrams for the Understanding of Welding Phenomena * Metallurgical Processes During Solidification and Cooling in Stainless Steel Weld Metal * Metallurgical Phenomena in Secondary Crystallization of Stainless Steels and Weld Metals * Precipitation Phenomena in Stainless Steel and Weld Metals * Hot Cracking Resistance During the Welding of Austenitic Stainless Steels * Welding Metallurgy of Ferritic Stainless Chromium Steels with Carbon Contents Below 0.15 per cent * Welding Metallurgy of Low Carbon Chromium-Nickel Martensitic Stainless Steels (Soft Martensitic Steels) * Welding Metallurgy of Duplex Austenitic-Ferritic Stainless Steels * Welding Metallurgy of Austenitic Stainless Steels * General Instructions for the Welding and Post-Weld Surface Treatments of Fabrications and Welded Components Made from Austenitic Stainless Steel * Welding Metallurgy of Heat Resisting Steels * Welding Metallurgy of Austenitic-Ferritic Dissimilar Joints * Appendix: Abbreviations and Short Designations * References * Author Index * Subject Index.