Bandwidth (signal processing)

About: Bandwidth (signal processing) is a research topic. Over the lifetime, 48550 publications have been published within this topic receiving 600741 citations. The topic is also known as: Bandwidth (signal processing) & bandwidth.

Recent advances in high-capacity free-space optical and radio-frequency communications using orbital angular momentum multiplexing

Abstract: There is a continuing growth in the demand for data bandwidth, and the multiplexing of multiple independent data streams has the potential to provide the needed data capacity. One technique uses the spatial domain of an electromagnetic (EM) wave, and space division multiplexing (SDM) has become increasingly important for increased transmission capacity and spectral efficiency of a communication system. A subset of SDM is mode division multiplexing (MDM), in which multiple orthogonal beams each on a different mode can be multiplexed. A potential modal basis set to achieve MDM is to use orbital angular momentum (OAM) of EM waves. In such a system, multiple OAM beams each carrying an independent data stream are multiplexed at the transmitter, propagate through a common medium and are demultiplexed at the receiver. As a result, the total capacity and spectral efficiency of the communication system can be multiplied by a factor equal to the number of transmitted OAM modes. Over the past few years, progress has been made in understanding the advantages and limitations of using multiplexed OAM beams for communication systems. In this review paper, we highlight recent advances in the use of OAM multiplexing for high-capacity free-space optical and millimetre-wave communications. We discuss different technical challenges (e.g. atmospheric turbulence and crosstalk) as well as potential techniques to mitigate such degrading effects.This article is part of the themed issue 'Optical orbital angular momentum'.

Cooperative Intelligent Transport Systems: 5.9-GHz Field Trials Results of extensive V2X field trials conducted in a wide variety of physical environments in Australia, the US, and Europe, are presented and discussed in this paper.

Abstract: The mobile outdoor radio environment is challenging for vehicular communications. Although multipath propagation offers diversity and benefits in non-line-of-sight (NLOS) conditions, simultaneous multipath and mobility results in a doubly-selective fading channel. In practice, this means that the channel parameters vary significantly in both time and frequency within the bandwidth and typical packet durations used in 802.11p/WAVE standards for short-range vehicular communications. This paper presents the results of extensive field trial campaigns conducted in several countries, totaling over 1100 km. These field trials are scenario based, focusing on challenging low-latency, high-reliability vehicle-to-vehicle (V2V) safety applications including intersection collision warn- ing, turn across path, emergency electronic brake light, do not pass warning, and precrash sensing. Vehicle-to-infrastructure (V2I) applications are also considered. The field trials compared the performance of off-the-shelf WiFi-based radio equipment with a more advanced 802.11p compliant radio employing more sophisticated channel estimation and tracking. Field trial results demonstrate significantly improved performance using the advanced radio, translating into greatly increased driver warning times and stopping distances. In fact the results show that off-the-shelf WiFi equipment fails to provide sufficient stopping distance to avert accidents in some cases. During the field trials, channel sounding data were also captured. Analysis of these channel measurements reveals the critical importance of accurate channel estimation, tracking the channel in both time and frequency within each packet. Delay spread and Doppler spread statistics computed from the channel measure- ments validate previously reported results in the literature. The results in this paper, however, provide the first instance of channel measurements performed simultaneously to applica- tion performance evaluation. The objective is to firmly establish the link between radio channel characteristics and the performance of critical V2V safety applications.

Method and apparatus for supporting wideband and multiple bandwidth transmission protocols

Abstract: Enhanced protocols and devices may be used to alleviate loss of spectrum efficiency in wideband transmission. The protocols may implement a wideband transmission opportunity (TXOP) truncation where one or more of the channels involved in communication over the wideband are released. In one scenario, a wireless transmit/receive unit (WTRU) may obtain a TXOP for a 2 MHz bandwidth mode frame transmission with another device capable of operating in a 2 MHz bandwidth mode and a 1 MHz bandwidth mode. The WTRU may conduct a request-to-send (RTS)/clear-to-send (CTS) frame exchange in the second bandwidth mode, and truncate the TXOP by transmitting a contention free (CF)-End frame in the first and second bandwidth modes. In another scenario, an AP may obtain a TXOP for a 2 MHz bandwidth mode frame transmission with a WTRU capable of both 2 MHz and 1 MHz bandwidth modes.

Widely programmable high-frequency continuous-time filters in digital CMOS technology

Abstract: We present design considerations for programmable high-frequency continuous-time filters implemented in standard digital CMOS processes. To reduce area, accumulation MOS capacitors are used as integrating elements. The filter design problem is examined from the viewpoint of programmability. To allow frequency scalability without deterioration of noise performance and of the frequency response shape, we employ a technique called "constant-capacitance scaling," which assures that even parasitic capacitances remain invariant when transconductors are switched in and out of the filter. This technique is applied to the design of a programmable fourth order Butterworth continuous-time filter with a bandwidth programmable from 60 to 350 MHz implemented in a 0.25-/spl mu/m digital CMOS process. The filter has a dynamic range of 54 dB, dissipates 70 mW from a 3.3-V supply, and occupies an area of 0.15 mm/sup 2/.

Bandwidth extension of audio signals by spectral band replication

Abstract: Spectral Band Replication (SBR) is a new audio coding tool that significantly improves the coding gain of perceptual coders and speech coders. Currently, there are three different audio coders that have shown a vast improvement by the combination with SBR: MPEG-AAC, MPEG-Layer II and MPEG-Layer III (mp3), all three being parts of the open ISO-MPEG standard. The combination of AAC and SBR will be used in the standardized Digital Radio Mondiale (DRM) system, and SBR is currently also being standardized within MPEG-4. SBR is a so-called bandwidth extension technique, where a major part of a signal’s bandwidth is reconstructed from the lowband on the receiving side. It is developed and marketed by Coding Technologies, an international company in the audio coding field. This paper will focus on the technical details of SBR and in particular on the filter bank, which is the basis of the SBR process.