Showing papers on "Base station published in 2021"
TL;DR: In this paper, a joint learning, wireless resource allocation, and user selection problem is formulated as an optimization problem whose goal is to minimize an FL loss function that captures the performance of the FL algorithm.
Abstract: In this article, the problem of training federated learning (FL) algorithms over a realistic wireless network is studied. In the considered model, wireless users execute an FL algorithm while training their local FL models using their own data and transmitting the trained local FL models to a base station (BS) that generates a global FL model and sends the model back to the users. Since all training parameters are transmitted over wireless links, the quality of training is affected by wireless factors such as packet errors and the availability of wireless resources. Meanwhile, due to the limited wireless bandwidth, the BS needs to select an appropriate subset of users to execute the FL algorithm so as to build a global FL model accurately. This joint learning, wireless resource allocation, and user selection problem is formulated as an optimization problem whose goal is to minimize an FL loss function that captures the performance of the FL algorithm. To seek the solution, a closed-form expression for the expected convergence rate of the FL algorithm is first derived to quantify the impact of wireless factors on FL. Then, based on the expected convergence rate of the FL algorithm, the optimal transmit power for each user is derived, under a given user selection and uplink resource block (RB) allocation scheme. Finally, the user selection and uplink RB allocation is optimized so as to minimize the FL loss function. Simulation results show that the proposed joint federated learning and communication framework can improve the identification accuracy by up to 1.4%, 3.5% and 4.1%, respectively, compared to: 1) An optimal user selection algorithm with random resource allocation, 2) a standard FL algorithm with random user selection and resource allocation, and 3) a wireless optimization algorithm that minimizes the sum packet error rates of all users while being agnostic to the FL parameters.
713 citations
11 Jan 2021
TL;DR: In this paper, the relevant millimeter-wave enabling technologies are reviewed: they include the recent developments on the system architectures of active beamforming arrays, beamforming integrated circuits, antennas for base stations and user terminals, system measurement and calibration, and channel characterization.
Abstract: Ever since the deployment of the first-generation of mobile telecommunications, wireless communication technology has evolved at a dramatically fast pace over the past four decades. The upcoming fifth-generation (5G) holds a great promise in providing an ultra-fast data rate, a very low latency, and a significantly improved spectral efficiency by exploiting the millimeter-wave spectrum for the first time in mobile communication infrastructures. In the years beyond 2030, newly emerged data-hungry applications and the greatly expanded wireless network will call for the sixth-generation (6G) communication that represents a significant upgrade from the 5G network – covering almost the entire surface of the earth and the near outer space. In both the 5G and future 6G networks, millimeter-wave technologies will play an important role in accomplishing the envisioned network performance and communication tasks. In this paper, the relevant millimeter-wave enabling technologies are reviewed: they include the recent developments on the system architectures of active beamforming arrays, beamforming integrated circuits, antennas for base stations and user terminals, system measurement and calibration, and channel characterization. The requirements of each part for future 6G communications are also briefly discussed.
278 citations
TL;DR: A channel estimation framework based on the parallel factor decomposition to unfold the resulting cascaded channel model is proposed and it is demonstrated that the sum rate using the estimated channels always reach that of perfect channels under various settings, thus, verifying the effectiveness and robustness of the proposed estimation algorithms.
Abstract: Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low-power configuration, which has increased potential in enabling massive connectivity and low-latency communications. Accurate and low-overhead channel estimation in RIS-based systems is one of the most critical challenges due to the usually large number of RIS unit elements and their distinctive hardware constraints. In this paper, we focus on the uplink of a RIS-empowered multi-user Multiple Input Single Output (MISO) uplink communication systems and propose a channel estimation framework based on the parallel factor decomposition to unfold the resulting cascaded channel model. We present two iterative estimation algorithms for the channels between the base station and RIS, as well as the channels between RIS and users. One is based on alternating least squares (ALS), while the other uses vector approximate message passing to iteratively reconstruct two unknown channels from the estimated vectors. To theoretically assess the performance of the ALS-based algorithm, we derived its estimation Cramer-Rao Bound (CRB). We also discuss the downlink achievable sum rate computation with estimated channels and different precoding schemes for the base station. Our extensive simulation results show that our algorithms outperform benchmark schemes and that the ALS technique achieves the CRB. It is also demonstrated that the sum rate using the estimated channels always reach that of perfect channels under various settings, thus, verifying the effectiveness and robustness of the proposed estimation algorithms.
260 citations
TL;DR: A two-timescale channel estimation framework to exploit the property that the BS-RIS channel is high-dimensional but quasi-static, while the RIS-UE channel is mobile but low-dimensional is proposed.
Abstract: Channel estimation is challenging for the reconfigurable intelligent surface (RIS)-aided wireless communications. Since the number of coefficients of the cascaded channel among the base station (BS), the RIS, and the user equipment (UE), is the product of the number of BS antennas, the number of RIS elements, and the number of UEs, the pilot overhead can be prohibitively high. In this paper, we propose a two-timescale channel estimation framework to exploit the property that the BS-RIS channel is high-dimensional but quasi-static, while the RIS-UE channel is mobile but low-dimensional. Specifically, to estimate the quasi-static BS-RIS channel, we propose a dual-link pilot transmission scheme, where the BS transmits downlink pilots and receives uplink pilots reflected by the RIS. Then, we propose a coordinate descent-based algorithm to recover the BS-RIS channel. Since the quasi-static BS-RIS channel is estimated less frequently than the mobile channel is, the average pilot overhead can be reduced from a long-term perspective. Although the mobile RIS-UE channel has to be frequently estimated in a small timescale, the associated pilot overhead is low thanks to its low dimension. Simulation results show that the proposed two-timescale channel estimation framework can achieve accurate channel estimation with low pilot overhead.
236 citations
TL;DR: In this paper, the authors proposed a hybrid beamforming scheme for the multi-hop RIS-assisted communication networks to improve the coverage range at the TeraHertz-band frequencies.
Abstract: Wireless communication in the TeraHertz band (0.1–10 THz) is envisioned as one of the key enabling technologies for the future sixth generation (6G) wireless communication systems scaled up beyond massive multiple input multiple output (Massive-MIMO) technology. However, very high propagation attenuations and molecular absorptions of THz frequencies often limit the signal transmission distance and coverage range. Benefited from the recent breakthrough on the reconfigurable intelligent surfaces (RIS) for realizing smart radio propagation environment, we propose a novel hybrid beamforming scheme for the multi-hop RIS-assisted communication networks to improve the coverage range at THz-band frequencies. Particularly, multiple passive and controllable RISs are deployed to assist the transmissions between the base station (BS) and multiple single-antenna users. We investigate the joint design of digital beamforming matrix at the BS and analog beamforming matrices at the RISs, by leveraging the recent advances in deep reinforcement learning (DRL) to combat the propagation loss. To improve the convergence of the proposed DRL-based algorithm, two algorithms are then designed to initialize the digital beamforming and the analog beamforming matrices utilizing the alternating optimization technique. Simulation results show that our proposed scheme is able to improve 50% more coverage range of THz communications compared with the benchmarks. Furthermore, it is also shown that our proposed DRL-based method is a state-of-the-art method to solve the NP-hard beamforming problem, especially when the signals at RIS-assisted THz communication networks experience multiple hops.
206 citations
TL;DR: In this article, a DRL-based secure beamforming approach was proposed to achieve the optimal beamforming policy against eavesdroppers in dynamic environments, and a modified postdecision state (PDS) and prioritized experience replay (PER) scheme was utilized to enhance the learning efficiency and secrecy performance.
Abstract: In this paper, we study an intelligent reflecting surface (IRS)-aided wireless secure communication system, where an IRS is deployed to adjust its reflecting elements to secure the communication of multiple legitimate users in the presence of multiple eavesdroppers. Aiming to improve the system secrecy rate, a design problem for jointly optimizing the base station (BS)’s beamforming and the IRS’s reflecting beamforming is formulated considering different quality of service (QoS) requirements and time-varying channel conditions. As the system is highly dynamic and complex, and it is challenging to address the non-convex optimization problem, a novel deep reinforcement learning (DRL)-based secure beamforming approach is firstly proposed to achieve the optimal beamforming policy against eavesdroppers in dynamic environments. Furthermore, post-decision state (PDS) and prioritized experience replay (PER) schemes are utilized to enhance the learning efficiency and secrecy performance. Specifically, a modified PDS scheme is presented to trace the channel dynamic and adjust the beamforming policy against channel uncertainty accordingly. Simulation results demonstrate that the proposed deep PDS-PER learning based secure beamforming approach can significantly improve the system secrecy rate and QoS satisfaction probability in IRS-aided secure communication systems.
202 citations
TL;DR: The proposed joint precoding framework can serve as a general solution to maximize the capacity in most existing RIS-aided scenarios and simulation results demonstrate that, compared with the conventional cell-free network, the network capacity can be improved significantly.
Abstract: Thanks to the strong ability against the inter-cell interference, cell-free network is considered as a promising technique to improve network capacity. However, further capacity improvement requires to deploy more base stations (BSs) with high cost and power consumption. To address this issue, inspired by the recently developed reconfigurable intelligent surface (RIS) technique, we propose the concept of RIS-aided cell-free network to improve the capacity with low cost and power consumption. The key idea is to replace some of the required BSs by low-cost and energy-efficient RISs. Then, in a wideband RIS-aided cell-free network, we formulate the problem of joint precoding design at BSs and RISs to maximize the network capacity. Due to the non-convexity and high complexity of the formulated problem, we develop an alternating optimization framework to solve this challenging problem. In particular, we decouple this problem via fractional programming, and solve the subproblems alternatively. Note that most of the scenarios considered in existing works are special cases of the general scenario studied in this paper, and the proposed joint precoding framework can serve as a general solution to maximize the capacity in most existing RIS-aided scenarios. Finally, simulation results demonstrate that, compared with the conventional cell-free network, the network capacity under the proposed scheme can be improved significantly.
198 citations
TL;DR: In this paper, a physics-based model and a scalable optimization framework for large RISs were developed to optimize a large number of sub-wavelength RIS elements for online transmission.
Abstract: Intelligent reflecting surfaces (IRSs) have the potential to transform wireless communication channels into smart reconfigurable propagation environments. To realize this new paradigm, the passive IRSs have to be large, especially for communication in far-field scenarios, so that they can compensate for the large end-to-end path-loss, which is caused by the multiplication of the individual path-losses of the transmitter-to-IRS and IRS-to-receiver channels. However, optimizing a large number of sub-wavelength IRS elements imposes a significant challenge for online transmission. To address this issue, in this article, we develop a physics-based model and a scalable optimization framework for large IRSs. The basic idea is to partition the IRS unit cells into several subsets, referred to as tiles, model the impact of each tile on the wireless channel, and then optimize each tile in two stages, namely an offline design stage and an online optimization stage. For physics-based modeling, we borrow concepts from the radar literature, model each tile as an anomalous reflector, and derive its impact on the wireless channel for a given phase shift by solving the corresponding integral equations for the electric and magnetic vector fields. In the offline design stage, the IRS unit cells of each tile are jointly designed for the support of different transmission modes, where each transmission mode effectively corresponds to a given configuration of the phase shifts that the unit cells of the tile apply to an impinging electromagnetic wave. In the online optimization stage, the best transmission mode of each tile is selected such that a desired quality-of-service (QoS) criterion is maximized. We consider an exemplary downlink system and study the minimization of the base station (BS) transmit power subject to QoS constraints for the users. Since the resulting mixed-integer programming problem for joint optimization of the BS beamforming vectors and the tile transmission modes is non-convex, we derive two efficient suboptimal solutions, which are based on alternating optimization and a greedy approach, respectively. We show that the proposed modeling and optimization framework can be used to efficiently optimize large IRSs comprising thousands of unit cells.
166 citations
TL;DR: A two-stage channel estimation scheme for RIS-aided millimeter wave (mmWave) MIMO systems without a direct BS-MS channel is adopted, using atomic norm minimization to sequentially estimate the channel parameters, i.e., angular parameters, angle differences, and the products of propagation path gains.
Abstract: A reconfigurable intelligent surface (RIS) can shape the radio propagation environment by virtue of changing the impinging electromagnetic waves towards any desired directions, thus, breaking the general Snell’s reflection law. However, the optimal control of the RIS requires perfect channel state information (CSI) of the individual channels that link the base station (BS) and the mobile station (MS) to each other via the RIS. Thereby super-resolution channel (parameter) estimation needs to be efficiently conducted at the BS or MS with CSI feedback to the RIS controller. In this paper, we adopt a two-stage channel estimation scheme for RIS-aided millimeter wave (mmWave) MIMO systems without a direct BS-MS channel, using atomic norm minimization to sequentially estimate the channel parameters, i.e., angular parameters, angle differences, and the products of propagation path gains. We evaluate the mean square error of the parameter estimates, the RIS gains, the average effective spectrum efficiency bound, and average squared distance between the designed beamforming and combining vectors and the optimal ones. The results demonstrate that the proposed scheme achieves super-resolution estimation compared to the existing benchmark schemes, thus offering promising performance in the subsequent data transmission phase.
154 citations
TL;DR: A framework for the joint optimization of UTs’ transmit precoding and RIS reflective beamforming to maximize a performance metric called resource efficiency (RE) is developed and results illustrate the effectiveness and rapid convergence rate of this proposed optimization framework.
Abstract: The emergence of reconfigurable intelligent surfaces (RISs) enables us to establish programmable radio wave propagation that caters for wireless communications, via employing low-cost passive reflecting units. This work studies the non-trivial tradeoff between energy efficiency (EE) and spectral efficiency (SE) in multiuser multiple-input multiple-output (MIMO) uplink communications aided by a RIS equipped with discrete phase shifters. For reducing the required signaling overhead and energy consumption, our transmission strategy design is based on the partial channel state information (CSI), including the statistical CSI between the RIS and user terminals (UTs) and the instantaneous CSI between the RIS and the base station. To investigate the EE-SE tradeoff, we develop a framework for the joint optimization of UTs’ transmit precoding and RIS reflective beamforming to maximize a performance metric called resource efficiency (RE). For the design of UT's precoding, it is simplified into that of UTs’ transmit powers with the aid of the closed-form solutions of UTs’ optimal transmit directions. To avoid the high complexity in computing the nested integrals involved in the expectations, we derive an asymptotic deterministic objective expression. For the design of the RIS phases, an iterative mean-square error minimization approach is proposed via capitalizing on the homotopy, accelerated projected gradient, and majorization-minimization methods. Numerical results illustrate the effectiveness and rapid convergence rate of our proposed optimization framework.
145 citations
TL;DR: This article performs a comprehensive review of the TL algorithms used in different wireless communication fields, such as base stations/access points switching, indoor wireless localization and intrusion detection in wireless networks, etc.
Abstract: In the coming 6G communications, network densification, high throughput, positioning accuracy, energy efficiency, and many other key performance indicator requirements are becoming increasingly strict In the future, how to improve work efficiency while saving costs is one of the foremost research directions in wireless communications Being able to learn from experience is an important way to approach this vision Transfer learning (TL) encourages new tasks/domains to learn from experienced tasks/domains for helping new tasks become faster and more efficient TL can help save energy and improve efficiency with the correlation and similarity information between different tasks in many fields of wireless communications Therefore, applying TL to future 6G communications is a very valuable topic TL has achieved some good results in wireless communications In order to improve the development of TL applied in 6G communications, this article performs a comprehensive review of the TL algorithms used in different wireless communication fields, such as base stations/access points switching, indoor wireless localization and intrusion detection in wireless networks, etc Moreover, the future research directions of mutual relationship between TL and 6G communications are discussed in detail Challenges and future issues about integrate TL into 6G are proposed at the end This article is intended to help readers understand the past, present, and future between TL and wireless communications
TL;DR: In this paper, an alternative application of metasurfaces for wireless communications as active reconfigurable antennas with advanced analog signal processing capabilities for next generation transceivers is presented.
Abstract: Next generation wireless base stations and access points will transmit and receive using an extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in shaping the propagation environment. This article presents an alternative application of metasurfaces for wireless communications as active reconfigurable antennas with advanced analog signal processing capabilities for next generation transceivers. We review the main characteristics of metasurfaces used for radiation and reception, and analyze their main advantages as well as their capability to reliably communicate in wireless networks. As current studies unveil only a portion of the potential of metasurfaces, we detail a list of exciting research and implementation challenges which arise from the application of metasurface antennas for wireless transceivers.
TL;DR: Simulation results validate the analytical results and show the practical advantages of the proposed double-IRS system with cooperative passive beamforming designs in terms of the maximum signal-to-noise ratio (SNR) and multi-user effective channel rank, respectively.
Abstract: Intelligent reflecting surface (IRS) has emerged as an enabling technology to achieve smart and reconfigurable wireless communication environment cost-effectively. Prior works on IRS mainly consider its passive beamforming design and performance optimization without the inter-IRS signal reflection, which thus do not unveil the full potential of multi-IRS assisted wireless networks. In this paper, we study a double-IRS assisted multi-user communication system with the cooperative passive beamforming design that captures the multiplicative beamforming gain from the inter-IRS channel. Under the general channel setup with the co-existence of both double- and single-reflection links, we jointly optimize the (active) receive beamforming at the base station (BS) and the cooperative (passive) reflect beamforming at the two distributed IRSs (deployed near the BS and users, respectively) to maximize the minimum signal-to-interference-plus-noise ratio (SINR) of all users. Moreover, for the single-user and multi-user setups, we analytically show the superior performance of the double-IRS cooperative system over the conventional single-IRS system in terms of the maximum signal-to-noise ratio (SNR) and multi-user effective channel rank, respectively. Simulation results validate our analytical results and show the practical advantages of the proposed double-IRS system with cooperative passive beamforming designs.
TL;DR: This letter presents a secure beamforming (BF) scheme for RSMA-based cognitive satellite terrestrial networks in the presence of multiple eavesdroppers and proposes a robust BF scheme to convert the nonconvex objective and constraints into convex ones, which can be iteratively solved.
Abstract: Rate-splitting multiple access (RSMA) has recently received considerable attention due to its high efficiency in both spectral utilization and energy consumption. Inspired by this emerging technique, this letter presents a secure beamforming (BF) scheme for RSMA-based cognitive satellite terrestrial networks in the presence of multiple eavesdroppers. Assuming that the system operates in the millimeter wave band and only imperfect wiretap channel state information is available at the satellite and terrestrial base station, our objective is to maximize the secrecy-energy efficiency of the earth station (ES) while meeting the constraints on the ES secrecy rate, the cellular users’ rate requirements, and transmit power budgets of the satellite and base station. As the formulated optimization problem is mathematically intractable, by applying successive convex approximation and Taylor expansion methods, we propose a robust BF scheme to convert the nonconvex objective and constraints into convex ones, which can be iteratively solved. The effectiveness and superiority of the proposed scheme are confirmed through simulation results.
TL;DR: The performance of cooperative simultaneous wireless information and power transfer (SWIPT) nonorthogonal multiple access (NOMA) for massive IoT systems is studied and hardware impairment parameter has a deleterious effect on system performance while the channel estimation parameter is always beneficial to the OP.
Abstract: Massive connectivity and limited energy are main challenges for the beyond 5G (B5G)-enabled massive Internet of Things (IoT) to maintain diversified Qualify of Service (QoS) of the huge number of IoT device users. Motivated by these challenges, this article studies the performance of cooperative simultaneous wireless information and power transfer (SWIPT) nonorthogonal multiple access (NOMA) for massive IoT systems. Under the practical assumption, residual hardware impairments (RHIs) and channel estimation errors (CEEs) are taken into account. The communication between the base station (BS) and two NOMA IoT device users is realized through a direct link and the assistance of multiple relays with finite energy storage capability that can harvest energy from the BS. Aiming at improving the system performance, an optimal relay is selected among $K$ relays by using the partial relay selection (PRS) protocol to forward the received signal to the two NOMA IoT device users, namely, the far user (FU) and near user (NU). To evaluate the system performance, exact analytical expressions for the outage probability (OP) are derived in closed form. In order to get a better understanding of the overall system performance, we further undertake diversity order analyses by deriving asymptotic expressions for the OP in the high signal-to-noise ratio (SNR) regime. In addition, we also investigate the energy efficiency (EE) of the considered system, which is a crucial performance metric in massive IoT systems so that the impact of key system parameters on the performance can be quantified. Finally, the optimal power allocation scheme to maximize the sum rate of the considered system in the high SNR regime is also designed. Numerical results have shown that: 1) hardware impairment parameter has a deleterious effect on system performance while the channel estimation parameter is always beneficial to the OP; 2) the expected performance improvements obtained by the user of PRS protocol are enhanced by increasing the number of relays; and 3) the proposed power allocation scheme can optimize the sum-rate performance of the considered system.
TL;DR: In this article, the authors considered a downlink IOS-assisted communication system, where a multi-antenna small base station (SBS) and an IOS jointly perform beamforming, for improving the received power of multiple MUs on both sides of the IOS, through different reflective/refractive channels.
Abstract: Intelligent reflecting surfaces (IRSs), which are capable of adjusting the propagation conditions by controlling the phase shifts of the reflected waves that impinge on the surface, have been widely analyzed for enhancing the performance of wireless systems. However, the reflective properties of widely studied IRSs restrict the service coverage to only one side of the surface. In this paper, to extend the wireless coverage of communication systems, we introduce the concept of intelligent omni-surface (IOS)-assisted communication. More precisely, an IOS is an important instance of a reconfigurable intelligent surface (RIS) that can provide service coverage to the mobile users (MUs) in a reflective and a refractive manner. We consider a downlink IOS-assisted communication system, where a multi-antenna small base station (SBS) and an IOS jointly perform beamforming, for improving the received power of multiple MUs on both sides of the IOS, through different reflective/refractive channels. To maximize the sum-rate, we formulate a joint IOS phase shift design and SBS beamforming optimization problem, and propose an iterative algorithm to efficiently solve the resulting non-convex program. Both theoretical analysis and simulation results show that an IOS significantly extends the service coverage of the SBS when compared to an IRS.
TL;DR: The fundamentals, solutions, and future opportunities of channel estimation in the RIS assisted wireless communication system are provided and a new channel estimation scheme with low pilot overhead will be provided in the second part of this letter.
Abstract: The reconfigurable intelligent surface (RIS) with low hardware cost and energy consumption has been recognized as a potential technique for future 6G communications to enhance coverage and capacity. To achieve this goal, accurate channel state information (CSI) in RIS assisted wireless communication system is essential for the joint beamforming at the base station (BS) and the RIS. However, channel estimation is challenging, since a large number of passive RIS elements cannot transmit, receive, or process signals. In the first part of this invited paper, we provide an overview of the fundamentals, solutions, and future opportunities of channel estimation in the RIS assisted wireless communication system. It is noted that a new channel estimation scheme with low pilot overhead will be provided in the second part of this letter.
TL;DR: This paper proposes deploying an IRS to cover the dead zone of cellular multiuser full-duplex (FD) two-way communication links while suppressing user-side self-interference (SI) and co-channel interference (CI) and validate the advantages of introducing IRS to improve coverage in blind areas.
Abstract: Low-cost passive intelligent reflecting surfaces (IRSs) have recently been envisioned as a revolutionary technology capable of reconfiguring the wireless propagation environment through carefully tuning reflection elements. This paper proposes deploying an IRS to cover the dead zone of cellular multiuser full-duplex (FD) two-way communication links while suppressing user-side self-interference (SI) and co-channel interference (CI). This approach, allowing the base station (BS) and all users to exchange information simultaneously, can potentially double the spectral efficiency. To ensure network fairness, we jointly optimize the precoding matrix of the BS and the reflection coefficients of the IRS to maximize the weighted minimum rate (WMR) of all users, subject to maximum transmit power and unit-modulus constraints. We reformulate this non-convex problem and decouple it into two subproblems. Then the optimization variables in the equivalent problem are alternately optimized by adopting the block coordinate descent (BCD) algorithm. In order to further reduce the computational complexity, we propose the minorization-maximization (MM) algorithm for optimizing the precoding matrix and the reflection coefficient vector by defining minorizing functions in the surrogate problems. Finally, simulation results confirm the convergence and efficiency of our proposed algorithm, and validate the advantages of introducing IRS to improve coverage in blind areas.
TL;DR: This article proposes a beamforming (BF) scheme for a cognitive satellite terrestrial network, where the base station and a cooperative terminal are exploited as green interference resources to enhance the system security performance in the presence of unknown eavesdroppers.
Abstract: This article proposes a beamforming (BF) scheme for a cognitive satellite terrestrial network, where the base station (BS) and a cooperative terminal (CT) are exploited as green interference resources to enhance the system security performance in the presence of unknown eavesdroppers. Different from the related works, we assume that only imperfect channel information of the mobile user (MU) and earth station (ES) is available. Specifically, we formulate an optimization problem with the objective to degrade the possible wiretap channels within the private signal beampattern region, while imposing constraints on the signal-to-interference-plus-noise ratio (SINR) at the MU, the interference level of the ES and the total transmit power budget of the BS and CT. To solve this mathematically intractable problem, we propose a joint artificial noise generation and cooperative jamming BF scheme to suppress the interception. Finally, the effectiveness and superiority of the proposed BF scheme are confirmed through computer simulations.
TL;DR: A comprehensive survey on green UAV communications for 6G is carried out, and the typical UAVs and their energy consumption models are introduced, and several promising techniques and open research issues are pointed out.
TL;DR: In this article, the authors presented the localization performance limits for communication scenarios where a single next-generation NodeB base station (gNB), equipped with multiple antennas, infers the position and the orientation of a user equipment (UE) in a reconfigurable intelligent surface (RIS)-assisted smart radio environment (SRE).
Abstract: Next-generation cellular networks could witness the creation of smart radio environments (SREs), where walls and objects will be coated with reconfigurable intelligent surfaces (RISs) to strengthen the communication and localization performance. In fact, RISs have been recently introduced not only to overcome communication blockages due to obstacles but also for high-precision localization of mobile users in GPS denied environments, e.g., indoors. Towards such a vision, this paper presents the localization performance limits for communication scenarios where a single next generation NodeB base station (gNB), equipped with multiple antennas, infers the position and the orientation of a user equipment (UE) in a reconfigurable intelligent surface (RIS)-assisted smart radio environment (SRE). We consider a signal model that is valid also for near-field propagation conditions, as the usually adopted far-field assumption does not always hold, especially for large RISs. For the considered scenario, we derive the Cramer-Rao lower bound (CRLB) for assessing the ultimate localization and orientation performance of synchronous and asynchronous signalling schemes. In addition, we propose a closed-form RIS phase profile that well suits joint communication and localization, and we perform extensive numerical results to assess the performance of our scheme for various localization scenarios and for various RIS phase design. Numerical results show that the proposed scheme can achieve remarkable performance even in asynchronous signalling, and that the proposed phase design, based on signal-to-noise ratio (SNR), approaches the numerical optimal phase design that minimizes the CRLB.
TL;DR: Zhang et al. as mentioned in this paper proposed a primal-dual greedy auction mechanism to decide winners in the auction and maximize social welfare, which can guarantee three economic properties, namely, truthfulness, individual rationality and efficiency.
Abstract: Federated Learning (FL) is a distributed learning framework that can deal with the distributed issue in machine learning and still guarantee high learning performance. However, it is impractical that all users will sacrifice their resources to join the FL algorithm. This motivates us to study the incentive mechanism design for FL. In this paper, we consider a FL system that involves one base station (BS) and multiple mobile users. The mobile users use their own data to train the local machine learning model, and then send the trained models to the BS, which generates the initial model, collects local models and constructs the global model. Then, we formulate the incentive mechanism between the BS and mobile users as an auction game where the BS is an auctioneer and the mobile users are the sellers. In the proposed game, each mobile user submits its bids according to the minimal energy cost that the mobile users experiences in participating in FL. To decide winners in the auction and maximize social welfare, we propose the primal-dual greedy auction mechanism. The proposed mechanism can guarantee three economic properties, namely, truthfulness, individual rationality and efficiency. Finally, numerical results are shown to demonstrate the performance effectiveness of our proposed mechanism.
TL;DR: This article proposes a clustering algorithm based on an improved $K$ -means method to divide IoT devices into several groups so that the number of devices in each group is roughly the same, and a modified-Hungarian-based dynamic many–many matching (HD4M) algorithm is designed for assigning subchannels to IoT devices, which can efficiently mitigate the interference.
Abstract: As the commercial launch of the fifth-generation (5G) wireless communications gets near, the trend from the Internet of Things (IoT) to the Internet of Everything (IoE) is emerging. Due to the advantages of the high mobility, high Line-of-Sight (LoS) probability and low labor cost, unmanned aerial vehicles (UAVs) may play an important role in the future IoT communication networks, e.g., data collection in remote areas. In this article, we study the 3-D placement and resource allocation of multiple UAV-mounted base stations (BSs) in an uplink IoT network, where the balanced task for the UAV-BSs, the limited channel resource, and the signal interference are taken into consideration. In the considered system, the total transmission power of IoT devices is minimized, subject to a signal-to-interference-and-noise ratio (SINR) threshold for each device. First, aiming to balance the task of each UAV, we propose a clustering algorithm based on an improved $K$ -means method to divide IoT devices into several groups so that the number of devices in each group is roughly the same. Then, based on matching theory, a modified-Hungarian-based dynamic many–many matching (HD4M) algorithm is designed for assigning subchannels to IoT devices, which can efficiently mitigate the interference. Finally, we jointly optimize the transmission power of IoT devices and the altitudes of UAVs via an alternating iterative method. The simulation results show that the total transmission power decreases significantly after applying the proposed algorithms.
TL;DR: In this article, a group-of-subarrays (GoSA) ultra-massive MIMO structure in low-THz band was proposed to mitigate the beam split effect arising from frequency-independent analog beamformers, and a phase correction technique to align the beams of multiple subcarriers toward a single physical direction.
Abstract: Wireless communications and sensing at terahertz (THz) band are increasingly investigated as promising short-range technologies because of the availability of high operational bandwidth at THz. In order to address the extremely high attenuation at THz, ultra-massive multiple-input multiple-output (MIMO) antenna systems have been proposed for THz communications to compensate propagation losses. However, the cost and power associated with fully digital beamformers of these huge antenna arrays are prohibitive. In this paper, we develop wideband hybrid beamformers based on both model-based and model-free techniques for a new group-of-subarrays (GoSA) ultra-massive MIMO structure in low-THz band. Further, driven by the recent developments to save the spectrum, we propose beamformers for a joint ultra-massive MIMO radar-communications system, wherein the base station serves multi-antenna user equipment (RX), and tracks radar targets by generating multiple beams toward both RX and the targets. We formulate the GoSA beamformer design as an optimization problem to provide a trade-off between the unconstrained communications beamform-ers and the desired radar beamformers. To mitigate the beam split effect at THz band arising from frequency-independent analog beamformers, we propose a phase correction technique to align the beams of multiple subcarriers toward a single physical direction. Additionally, our design also exploits second-order channel statistics so that an infrequent channel feedback from the RX is achieved with less channel overhead. To further decrease the ultra-massive MIMO computational complexity and enhance robustness, we also implement deep learning solutions to the proposed model-based hybrid beamformers. Numerical experiments demonstrate that both techniques outperform the conventional approaches in terms of spectral efficiency and radar beampatterns, as well as exhibiting less hardware cost and computation time.
TL;DR: In this paper, a deep learning framework for enabling proactive handoff in wireless networks is presented. But the authors focus on the use of visual data captured by red-green-blue (RGB) cameras deployed at the base stations.
Abstract: The sensitivity to blockages is a key challenge for millimeter wave and terahertz networks in 5G and beyond. Since these networks mainly rely on line-of-sight (LOS) links, sudden link blockages highly threaten the reliability of the networks. Further, when the LOS link is blocked, the network typically needs to hand off the user to another LOS basestation, which may incur critical time latency, especially if a search over a large codebook of narrow beams is needed. A promising way to tackle the reliability and latency challenges lies in enabling proaction in wireless networks. Proaction allows the network to anticipate future blockages, especially dynamic blockages, and initiate user hand-off beforehand. This article presents a complete machine learning framework for enabling proaction in wireless networks relying on visual data captured, for example, by red-green-blue (RGB) cameras deployed at the base stations. In particular, the article proposes a vision-aided wireless communication solution that utilizes bimodal machine learning to perform proactive blockage prediction and user hand-off. This is mainly achieved via a deep learning algorithm that learns from visual and wireless data how to predict incoming blockages. The predictions of this algorithm are used by the wireless network to proactively initiate hand-off decisions and avoid any unnecessary latency. The algorithm is developed on a vision-wireless dataset generated using the ViWi data-generation framework. Experimental results on two basestations with different cameras indicate that the algorithm is capable of accurately detecting incoming blockages more than ${\sim} 90\%$ of the time. Such blockage prediction ability is directly reflected in the accuracy of proactive hand-off, which also approaches 87%. This highlights a promising direction for enabling high reliability and low latency in future wireless networks.
TL;DR: In this article, the authors considered a downlink mmWave MIMO system, where an LIS is deployed to assist the downlink data transmission from a base station (BS) to a user equipment (UE).
Abstract: Large intelligent surface (LIS) has recently emerged as a potential low-cost solution to reshape the wireless propagation environment for improving the spectral efficiency. In this article, we consider a downlink millimeter-wave (mmWave) multiple-input-multiple-output (MIMO) system, where an LIS is deployed to assist the downlink data transmission from a base station (BS) to a user equipment (UE). Both the BS and the UE are equipped with a large number of antennas, and a hybrid analog/digital precoding/combining structure is used to reduce the hardware cost and energy consumption. We aim to maximize the spectral efficiency by jointly optimizing the LIS’s reflection coefficients and the hybrid precoder (combiner) at the BS (UE). To tackle this non-convex problem, we reformulate the complex optimization problem into a much more friendly optimization problem by exploiting the inherent structure of the effective (cascade) mmWave channel. A manifold optimization (MO)-based algorithm is then developed. Simulation results show that by carefully devising LIS’s reflection coefficients, our proposed method can help realize a favorable propagation environment with a small channel matrix condition number. Besides, it can achieve a performance comparable to those of state-of-the-art algorithms, while at a much lower computational complexity.
TL;DR: This article proposes an approach consisting of offline and online stages of deploying heterogeneous edge servers to optimize the expected response time of both the whole and individual base stations, and reduces system-expected response time by 47.37%, but also improves response time fairness of base stations.
Abstract: In the past few years, the study on placing edge servers for response time optimization in mobile edge-cloud computing systems has become increasingly popular. Most of the existing schemes neglect two important aspects: one is the heterogeneity of edge/cloud servers and the other is the response time fairness of base stations, which may significantly degrade the system quality of services to mobile users. In this article, we conduct the study of deploying heterogeneous edge servers to optimize the expected response time of both the whole and individual base stations. We propose an approach consisting of offline and online stages. At the offline stage, the optimal placement strategy of heterogeneous edge servers is produced by using an integer linear programming technique. At the online stage, a mobility-aware game-theory-based method is developed to deal with the dynamic characteristic of user movement. Experimental results reveal that compared to benchmarking methods, our approach not only reduces system-expected response time by 47.37%, but also improves response time fairness of base stations by 71.60%.
TL;DR: An attention-weighted federated deep reinforcement learning (AWFDRL) model that uses federated learning to improve the training efficiency of the Q-learning network by considering the limited computing and storage capacity, and incorporates an attention mechanism to optimize the aggregation weights to avoid the imbalance of local model quality is designed.
Abstract: In order to meet the growing demands for multimedia service access and release the pressure of the core network, edge caching and device-to-device (D2D) communication have been regarded as two promising techniques in next generation mobile networks and beyond. However, most existing related studies lack consideration of effective cooperation and adaptability to the dynamic network environments. In this article, based on the flexible trilateral cooperation among user equipment, edge base stations and a cloud server, we propose a D2D-assisted heterogeneous collaborative edge caching framework by jointly optimizing the node selection and cache replacement in mobile networks. We formulate the joint optimization problem as a Markov decision process, and use a deep Q-learning network to solve the long-term mixed integer linear programming problem. We further design an attention-weighted federated deep reinforcement learning (AWFDRL) model that uses federated learning to improve the training efficiency of the Q-learning network by considering the limited computing and storage capacity, and incorporates an attention mechanism to optimize the aggregation weights to avoid the imbalance of local model quality. We prove the convergence of the corresponding algorithm, and present simulation results to show the effectiveness of the proposed AWFDRL framework in reducing average delay of content access, improving hit rate and offloading traffic.
TL;DR: In this paper, the sum transmit power of the network is minimized by controlling the phase beamforming of the RIS and the BS transmit power under signal-to-interference-plus-noise ratio constraints.
Abstract: This article investigates the problem of resource allocation for multiuser communication networks with a reconfigurable intelligent surface (RIS)-assisted wireless transmitter. In this network, the sum transmit power of the network is minimized by controlling the phase beamforming of the RIS and transmit power of the base station. This problem is posed as a joint optimization problem of transmit power and RIS control, whose goal is to minimize the sum transmit power under signal-to-interference-plus-noise ratio (SINR) constraints of the users. To solve this problem, a dual method is proposed, where the dual problem is obtained as a semidefinite programming problem. After solving the dual problem, the phase beamforming of the RIS is obtained in the closed form, while the optimal transmit power is obtained by using the standard interference function. Simulation results show that the proposed scheme can reduce up to 94% and 27% sum transmit power compared to the maximum ratio transmission (MRT) beamforming and zero-forcing (ZF) beamforming techniques, respectively.
TL;DR: The proposed algorithm can significantly enhance the RIS-assisted MIMO system performance and enables the identification of asymptotic-optimal transmit covariance and diagonal phase-shifting matrices using an alternating optimization algorithm.
Abstract: Reconfigurable intelligent surface (RIS) is an emerging technology to enhance wireless communication in terms of energy cost and system performance by equipping a considerable quantity of nearly passive reflecting elements. This study focuses on a downlink RIS-assisted multiple-input multiple-output (MIMO) wireless communication system that comprises three communication links of Rician channel, including base station (BS) to RIS, RIS to user, and BS to user. The objective is to design an optimal transmit covariance matrix at BS and diagonal phase-shifting matrix at RIS to maximize the achievable ergodic rate by exploiting the statistical channel state information at BS. Therefore, a large-system approximation of the achievable ergodic rate is derived using the replica method in large dimension random matrix theory. This large-system approximation enables the identification of asymptotic-optimal transmit covariance and diagonal phase-shifting matrices using an alternating optimization algorithm. Simulation results show that the large-system results are consistent with the achievable ergodic rate calculated by Monte-Carlo averaging. The results verify that the proposed algorithm can significantly enhance the RIS-assisted MIMO system performance.