Biasing

About: Biasing is a research topic. Over the lifetime, 29422 publications have been published within this topic receiving 301035 citations.

A new regime for operating capacitive micromachined ultrasonic transducers

Abstract: We report on a new operation regime for capacitive micromachined ultrasonic transducers (cMUTs). Traditionally, cMUTs are operated at a bias voltage lower than the collapse voltage of their membranes. In the new proposed operation regime, first the cMUT is biased past the collapse voltage. Second, the bias voltage applied to the collapsed membrane is reduced without releasing the membrane. Third, the cMUT is excited with an ac signal at the bias point, keeping the total applied voltage between the collapse and snapback voltages. In this operation regime, the center of the membrane is always in contact with the substrate. Our finite element methods (FEM) calculations reveal that a cMUT operating in this new regime, between collapse and snapback voltages, possesses a coupling efficiency (k/sub T//sup 2/) higher than a cMUT operating in the conventional regime below its collapse voltage. This paper compares the simulation results of the coupling efficiencies of cMUTs operating in conventional and new operation regimes.

Electrically tunable microwave filters

Abstract: The tunable filters of the present invention incorporate tunable dielectric materials (e.g., bulk and thin film ferroelectric and paraelectric materials) in contact with segments of resonators that are at an RF voltage maximum to alter the pass band or stop band characteristic of an RF signal outputted by the filter. The biasing circuitry in contact with the tunable dielectric material can include components for inhibiting or retarding the coupling of RF energy to the biasing circuit.

Room temperature operation of a high output current magnetic tunnel transistor

Abstract: The structure and properties of a magnetic tunnel transistor with high current output at room temperature are presented. The transistor marries a two-terminal magnetic tunnel junction with an Al2O3 tunnel barrier and a GaAs collector. The output current depends on the spin-dependent transport of hot electrons in the base layer of the transistor, which is formed from a single ultrathin ferromagnetic film. At a bias voltage of 1.4 V across the tunnel barrier, output currents larger than 1 μA and magnetocurrent changes of 64% are obtained at room temperature.

Low temperature tunneling magnetoresistance on (La,Sr)MnO3∕Co junctions with organic spacer layers

Abstract: This paper concerns with giant magnetoresistance (MR) effects in organic spin valves, which are realized as layered (La,Sr)MnO3 (LSMO)-based junctions with tris-(8, hydroxyquinoline) aluminum (Alq3)-spacer and ferromagnetic top layers. The experimental work was focused on the understanding of the transport behavior in this type of magnetic switching elements. The device preparation was carried out in an ultrahigh vacuum chamber equipped with a mask changer by evaporation and sputtering on SrTiO3 substrates with LSMO stripes deposited by pulsed laser technique. The field and temperature dependences of the MR of the prepared elements are studied. Spin-valve effects at 4.2K have been observed in a broad resistance interval from 50Ω to MΩ range, however, without systematic dependence on spacer layer thickness and device area. In some samples, the MR changes sign as a function of the bias voltage. The observed similarity in the bias voltages dependences of the MR in comparison with conventional magnetic tunnel junctions with oxide barriers suggests a description of the found effects within the classical tunneling concept. This assumption is also confirmed by a similar switching behavior observed on ferromagnetically contacted carbon nanotube devices. The proposed model implies the realization of the transport via local Co chains embedded in the Alq3 layer and spin dependent tunneling over barriers at the interface Co grains∕Alq3∕LSMO. The existence of conducting Co chains within the organics is supported by transmission electron microscopic∕electron energy loss spectroscopic studies on cross-sectional samples from analogous layer stacks.

Magnetic tunnel junction memory cell with in-stack biasing of the free ferromagnetic layer and memory array using the cell

Abstract: A magnetic tunnel junction (MTJ) memory cell uses a biasing ferromagnetic layer in the MTJ stack of layers that is magnetostatically coupled with the free ferromagnetic layer in the MTJ stack to provide transverse and/or longitudinal bias fields to the free ferromagnetic layer. The MTJ is formed on an electrical lead on a substrate and is made up of a stack of layers. The layers in the MTJ stack are an antiferromagnetic layer, a fixed ferromagnetic layer exchange biased with the antiferromagnetic layer so that its magnetic moment cannot rotate in the presence of an applied magnetic field, an insulating tunnel barrier layer in contact with the fixed ferromagnetic layer, a free ferromagnetic layer in contact with the tunnel barrier layer and whose magnetic moment is free to rotate in the presence of an applied magnetic field, and whose moment, in the absence of any applied field, is generally either parallel or antiparallel to that of the fixed ferromagnetic layer, a biasing ferromagnetic layer that has its magnetic moment aligned generally in the plane of the MTJ, and a nonferromagnetic electrically conductive spacer layer separating the biasing ferromagnetic layer from the other layers in the stack. The self field or demagnetizing field from the biasing layer magnetostatically couples with the edges of the free layer so as to provide a transverse bias field, which results in a coherent rotation of the moment of the free layer, and/or a longitudinal bias field, which assures that the two states of the memory cell are equally stable with respect to magnetic field excursions.