Showing papers on "Bioaerosol published in 2014"

Bioaerosols from composting facilities--a review.

Abstract: Bioaerosols generated at composting plants are released during processes that involve the vigorous movement of material such as shredding, compost pile turning, or compost screening. Such bioaerosols are a cause of concern because of their potential impact on both occupational health and the public living in close proximity to such facilities. The biological hazards potentially associated with bioaerosol emissions from composting activities include fungi, bacteria, endotoxin, and 1-3 β-glucans. There is a major lack of knowledge concerning the dispersal of airborne microorganisms emitted by composting plants as well as the potential exposure of nearby residents. This is due in part to the difficulty of tracing specifically these microorganisms in air. In recent years, molecular tools have been used to develop new tracers which should help in risk assessments. This review summarizes current knowledge of microbial diversity in composting aerosols and of the associated risks to health. It also considers methodologies introduced recently to enhance understanding of bioaerosol dispersal, including new molecular indicators and modeling.

Ambient measurements of biological aerosol particles near Killarney, Ireland: a comparison between real-time fluorescence and microscopy techniques

Abstract: . Primary biological aerosol particles (PBAPs) can contribute significantly to the coarse particle burden in many environments. PBAPs can thus influence climate and precipitation systems as cloud nuclei and can spread disease to humans, animals, and plants. Measurement data and techniques for PBAPs in natural environments at high time- and size resolution are, however, sparse, and so large uncertainties remain in the role that biological particles play in the Earth system. In this study two commercial real-time fluorescence particle sensors and a Sporewatch single-stage particle impactor were operated continuously from 2 August to 2 September 2010 at a rural sampling location in Killarney National Park in southwestern Ireland. A cascade impactor was operated periodically to collect size-resolved particles during exemplary periods. Here we report the first ambient comparison of a waveband integrated bioaerosol sensor (WIBS-4) with a ultraviolet aerodynamic particle sizer (UV-APS) and also compare these real-time fluorescence techniques with results of fluorescence and optical microscopy of impacted samples. Both real-time instruments showed qualitatively similar behavior, with increased fluorescent bioparticle concentrations at night, when relative humidity was highest and temperature was lowest. The fluorescent particle number from the FL3 channel of the WIBS-4 and from the UV-APS were strongly correlated and dominated by a 3 μm mode in the particle size distribution. The WIBS FL2 channel exhibited particle modes at approx. 1 and 3 μm, and each was correlated with the concentration of fungal spores commonly observed in air samples collected at the site (ascospores, basidiospores, Ganoderma spp.). The WIBS FL1 channel exhibited variable multimodal distributions turning into a broad featureless single mode after averaging, and exhibited poor correlation with fungal spore concentrations, which may be due to the detection of bacterial and non-biological fluorescent particles. Cladosporium spp., which are among the most abundant fungal spores in many terrestrial environments, were not correlated with any of the real-time fluorescence channels, suggesting that the real-time fluorescence instruments are relatively insensitive to PBAP classes with dark, highly absorptive cell walls. Fluorescence microscopy images of cascade impactor plates showed large numbers of coarse-mode particles consistent with the morphology and weak fluorescence expected of sea salt. Some of these particles were attached to biological cells, suggesting that a marine source influenced the PBAPs observed at the site and that the ocean may be an important contributor to PBAP loadings in coastal environments.

Using the WIBS-4 (Waveband Integrated Bioaerosol Sensor) Technique for the On-Line Detection of Pollen Grains

Abstract: Primary biological aerosol particles (PBAP) such as pollen and fungal spores can induce allergenic responses and affect health in general. Conditions such as allergic rhinitis (hay fever) and asthma have been related to pollen concentrations. Likewise some pollen have been shown to induce ice nucleation and cloud condensation at higher temperatures than those associated with some chemical species, thereby affecting planet Earth's albedo and overall radiative balance. Hence, the near real-time (on-line) monitoring of airborne pollen and other PBAP using a variety of spectroscopic and light scattering techniques represents an area of growing development and consequence. In this study, two separate field campaigns (one at a rural site in Ireland and the other at an urbanized location in Germany) were performed to detect and quantify pollen releases using a novel on-line fluorescence spectrometer (WIBS-4). The results were compared with results obtained using more traditional Hirst-type impactors. Size, “shap...

Temporal variability of the bioaerosol background at a subway station: Concentration level, size distribution, and diversity of airborne bacteria

Abstract: Naturally occurring bioaerosol environments may present a challenge to biological detection-identification-monitoring (BIODIM) systems aiming at rapid and reliable warning of bioterrorism incidents. One way to improve the operational performance of BIODIM systems is to increase our understanding of relevant bioaerosol backgrounds. Subway stations are enclosed public environments which may be regarded as potential bioterrorism targets. This study provides novel information concerning the temporal variability of the concentration level, size distribution, and diversity of airborne bacteria in a Norwegian subway station. Three different air samplers were used during a 72-h sampling campaign in February 2011. The results suggested that the airborne bacterial environment was stable between days and seasons, while the intraday variability was found to be substantial, although often following a consistent diurnal pattern. The bacterial levels ranged from not detected to 10 3 CFU m 3 and generally showed increased levels during the daytime compared to the nighttime levels, as well as during rush hours compared to non-rush hours. The airborne bacterial levels showed rapid temporal variation (up to 270-fold) on some occasions, both consistent and inconsistent with the diurnal profile. Airborne bacterium-containing particles were distributed between different sizes for particles of>1.1m, although50% were between 1.1 and 3.3 m. Anthropogenic activities (mainly passengers) were demonstrated as major sources of airborne bacteria and predominantly contributed 1.1- to 3.3-m bacterium-containing particles. Ourfindings contribute to the development of realistic testing and evaluation schemes for BIODIM equipment by providing information that may be used to simulate operational bioaerosol backgrounds during controlled aerosol chamber-based challenge tests with biological threat agents.

Performance of Two Fluorescence-Based Real-Time Bioaerosol Detectors: BioScout vs. UVAPS

Abstract: A 405 nm diode laser-based on-line bioaerosol detector, BioScout, was tested and compared with the Ultraviolet Aerodynamic Particle Sizer (UVAPS). Both instruments are based on laser-induced fluorescence of particles. Only a fraction of microbial particles produce enough fluorescence light to be detected by the instruments. This fluorescent particle fraction (FPF) is aerosol and instrument specific. The FPF values for common bacterial and fungal spores and biochemical particles were experimentally determined for both instruments. The BioScout exhibited higher FPF values for all the test aerosols except coenzyme NADH. The difference was higher for smaller particles. The FPF values of fungal spores and bacteria varied between 0.34 to 0.77 and 0.13 to 0.54 for the BioScout and the UVAPS, respectively. The results indicate that the 405 nm diode laser is a useful excitation source for fluorescence-based real-time detection of microbial aerosols. The FPF results of this study can be utilized to estimate the act...

Characterisation of bioaerosol emissions from a Colorado pine forest : results from the BEACHON-RoMBAS experiment

Abstract: . The behaviour of primary biological aerosols (PBAs) at an elevated, un-polluted North American forest site was studied using an ultra violet-light induced fluorescence (UV-LIF) measurement technique in conjunction with hierarchical agglomerative cluster analysis (HA-CA). Contemporaneous UV-LIF measurements were made with two wide-band integrated bioaerosol spectrometers, WIBS-3 and WIBS-4, which sampled close to the forest floor and via a continuous vertical profiling system, respectively. Additionally, meteorological parameters were recorded at various heights throughout the forest and used to estimate PBAP (Primary Biological Aerosol Particle) fluxes. HA-CA using data from the two, physically separated WIBS instruments independently yielded very similar cluster solutions. All fluorescent clusters displayed a diurnal minimum at midday at the forest floor with maximum concentration occurring at night. Additionally, the number concentration of each fluorescent cluster was enhanced, to different degrees, during wet periods. A cluster that displayed the greatest enhancement and highest concentration during sustained wet periods appears consistent with behaviour reported for fungal spores. A cluster that appears to be behaviourally consistent with bacteria dominated during dry periods. Fluorescent particle concentrations were found to be greater within the forest canopy than at the forest floor, indicating that the canopy was the main source of these particles rather than the minimal surface vegetation, which appeared to contribute little to overall PBA concentrations at this site. Fluorescent particle concentration was positively correlated with relative humidity (RH), and parameterisations of the aerosol response during dry and wet periods are reported. The aforementioned fungal spore-like cluster displayed a strong positive response to increasing RH. The bacteria-like cluster responded more strongly to direct rain-fall events than other PBA types. Peak concentrations of this cluster are shown to be linearly correlated to the log of peak rainfall rates. Parallel studies by Huffman et al. (2013) and Prenni et al. (2013) showed that the fluorescent particle concentrations correlated linearly with ice nuclei (IN) concentrations at this site during rain events. We discuss this result in conjunction with our cluster analysis to appraise the candidate IN.

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Abstract: Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study, airborne microorganisms generated from a wastewater treatment station (WWTS) that uses an oxidation ditch process were diminished by ventilation. Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups, concentrations, size distributions, and species diversity of airborne microorganisms before and after ventilation. There were 3021 +/- 537 CFU/m(3) of airborne bacteria and 926 +/- 132 CFU/m(3) of airborne fungi present in the WWTS bioaerosol. Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after 4 hr of air exchange. The highest removal (92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65-1.1 mu m sized particles. The bioaerosol particles over 4.7 mu m were also reduced effectively. Large panicles tended to be lost by gravitational settling and small particles were generally carried away, which led to the relatively easy reduction of bioaerosol particles 0.65-1.1 mu m and over 4.7 mu m in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces. (C) 2014 The Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V.

Survival of bioaerosols in HVAC system photocatalytic filters

Abstract: The survival of an experimental bioaerosol in photocatalytic and non-photocatalytic filters was investigated under UV-A or UV-C radiation exposure. To ensure the generation of reproducible bioaerosols in real operating conditions of Heating, Ventilation and Air Conditioning (HVAC) systems and their homogeneous coating on filters, a reactor with an optimal geometry was developed. The bacterial aerosol was generated from standardised bacterial suspensions and the Gram-negative bacterial model Escherichia coli was used as the experimental organism. The bioaerosol was characterised in terms of particle size distribution, reproducibility and stability over time. The coating of aerosolised cells on the filters was then studied. The total number of aerosolised E. coli cells was different from the amount of cultivable bacterial cells extracted from filters, probably resulting from the stress of the aerosolisation process. Damages to the outer membrane of E. coli cells were clearly observed through SEM and epifluorescent microscopy analysis. The influence of important physical parameters in the reactor-aerosolisation duration, frontal velocity and relative humidity- on the amount of aerosolised cells coated on filters were also investigated. Finally, the effects of UV-A or UV-C radiation were assessed on aerosolised microorganisms coated on HEPA photocatalytic filters and on photocatalytic or non-photocatalytic filters containing activated charcoal. The HEPA photocatalytic filters demonstrated a better disinfection efficiency with full damages of the aerosolised bacterial cells, probably resulting from an optimal contact between TiO2 coating and the microorganisms. In contrast, the use of filters with activated charcoal resulted in the apparition of an inactivation threshold that could be attributed to the penetration of aerosolised cells within the activated charcoal layer and the absence of contact with the photocatalyst. However, UV-C photocatalysis was able to inactivate faster and, at the same time, mineralise biological pollutants than UV-A.

Exposure of Workers of Municipal Landfill Site to Bacterial and Fungal Aerosol

Abstract: The present research was aimed at assessing the quality of air in work environment of the municipal landfill site in Torun. Air samples were collected in the outdoor space (operating landfill cell, technological square), and in indoor space (sorting station, weighing station, social room) using the impaction method. The microbiological air testing included determining the number of airborne mesophilic bacteria and molds. Bacterial strains were identified with appropriate API tests; molds were identified according to their macro and micro characteristics. In outdoor air, the highest average concentration of mesophilic bacteria were recorded at the operating landfill cell (1361 colony forming unit (CFU)/m3). The highest average concentrations of molds were recorded at the technological square (1179 CFU/m3). In indoor air, the highest average concentration of investigated microorganisms (bacteria: 10 707 CFU/m3, molds: 12 471 CFU/m3) were recorded in the sorting facility. The concentration of microorganisms in the outdoor air depended on the season (p < 0.05), but did not depend on the sampling site, while in the indoor air depended on the sampling site (p < 0.05) but did not depend on the season. Bioaerosol emitted in municipal facility was the source of bacterial (Bacillus subtilis, Pseudomonas aeruginosa) and fungal species (Aspergillus fumigatus, Madurella grisea, Penicillium manfferei, Scedosporium apiospermium, Cryptococcus neoformans), posing a health risk for humans. However Gram-negative bacteria constituted only a small fraction of the isolated microorganisms. The highest risk of exposure to biological agents was determined in the sorting station. The majority of the outdoor air samples were classified as uncontaminated. The results emphasize the need for regular monitoring of microbiological tests in indoor and outdoor air of municipal landfill sites as well as for control strategies in order to protect workers at landfill.

Submicronic fungal bioaerosols: high-resolution microscopic characterization and quantification.

Abstract: Submicronic particles released from fungal cultures have been suggested to be additional sources of personal exposure in mold-contaminated buildings. In vitro generation of these particles has been studied with particle counters, eventually supplemented by autofluorescence, that recognize fragments by size and discriminate biotic from abiotic particles. However, the fungal origin of submicronic particles remains unclear. In this study, submicronic fungal particles derived from Aspergillus fumigatus, A. versicolor, and Penicillium chrysogenum cultures grown on agar and gypsum board were aerosolized and enumerated using field emission scanning electron microscopy (FESEM). A novel bioaerosol generator and a fungal spores source strength tester were compared at 12 and 20 liters min(-1) airflow. The overall median numbers of aerosolized submicronic particles were 2 × 10(5) cm(-2), 2.6 × 10(3) cm(-2), and 0.9 × 10(3) cm(-2) for A. fumigatus, A. versicolor, and P. chrysogenum, respectively. A. fumigatus released significantly (P < 0.001) more particles than A. versicolor and P. chrysogenum. The ratios of submicronic fragments to larger particles, regardless of media type, were 1:3, 5:1, and 1:2 for A. fumigatus, A. versicolor, and P. chrysogenum, respectively. Spore fragments identified by the presence of rodlets amounted to 13%, 2%, and 0% of the submicronic particles released from A. fumigatus, A. versicolor, and P. chrysogenum, respectively. Submicronic particles with and without rodlets were also aerosolized from cultures grown on cellophane-covered media, indirectly confirming their fungal origin. Both hyphae and conidia could fragment into submicronic particles and aerosolize in vitro. These findings further highlight the potential contribution of fungal fragments to personal fungal exposure.

Effects of ozone and relative humidity on fluorescence spectra of octapeptide bioaerosol particles

Abstract: The effects of ozone and relative humidity (RH) at common atmospheric levels on the properties of single octapeptide bioaerosol particles were studied using an improved rotating reaction chamber, an aerosol generator, an ultraviolet aerodynamic particle sizer (UVAPS), an improved single particle fluorescence spectrometer (SPFS), and equipments to generate, monitor and control the ozone and RH. Aerosol particles (mean diameter ~2 μm) were generated from a slurry of octapeptide in phosphate buffered saline, injected into the rotating chamber, and kept airborne for hours. Bioaerosols were sampled from the chamber hourly for the measurements of particle-size distribution, concentration, total fluorescence excited at 355-nm, and single particle fluorescence spectra excited at 266-nm and 351-nm under different controlled RH (20%, 50%, or 80%) and ozone concentration (0 or 150 ppb). The results show that: (1) Particle size, concentration, and the 263-nm-excited fluorescence intensity decrease at different rates under different combinations of the RH and ozone concentrations used. (2) The 263-nm-excited UV fluorescence (280–400 nm) decreased more rapidly than the 263-nm-excited visible fluorescence (400–560 nm), and decreased most rapidly when ozone is present and RH is high. (3) The UV fluorescence peak near 340 nm slightly shifts to the shorter wavelength (blue-shift), consistent with a more rapid oxidation of tryptophan than tyrosine. (4) The 351/355-nm-excited fluorescence (430–580 nm/380–700 nm) increases when ozone is present, especially when the RH is high. (5) The 351/355-nm-excited fluorescence increase that occurs as the tryptophan emission in the UV decreases, and the observation that these changes occur more rapidly at higher RH with the present of ozone, are consistent with the oxidation of tryptophan by ozone and the conversion of the resulting ozonides to N-formyl kynurenine and kynurenine.

An airborne actinobacteria Nocardiopsis alba isolated from bioaerosol of a mushroom compost facility

Abstract: Actinobacteria are widely distributed in many environments and represent the most important trigger to the occupant respiratory health. Health complaints, including hypersensitivity pneumonitis of the workers, were recorded in a mushroom compost facility (MCF). The studies on the airborne bacteria were carried out to find a possible microbiological source of these symptoms. Culture analysis of compost bioaerosols collected in different location of the MCF was performed. An assessment of the indoor microbial exposure revealed bacterial flora of bioaerosol in the mushroom compost facility represented by Bacillus, Geobacillus, Micrococcus, Pseudomonas, Staphylococcus spp., and actinobacterial strain with white aerial mycelium. The thermotolerant actinobacterial strain of the same morphology was repeatedly isolated from many locations in MCF: air, compost sample, and solid surface in production hall. On the base of complex morphological, chemotaxonomic, and phylogenetic characteristics, the isolate has been classified as Nocardiopsis alba. Dominant position of N. alba in microbial environment of the mushroom compost facility may represent an indicator microorganism in compost bioaerosol. The bioavailability of N. alba in mushroom compost facility creates potential risk for the health of workers, and the protection of respiratory tract and/or skin is strongly recommended.

Bioaerosol concentration in the air surrounding municipal solid waste landfill

Abstract: The research was focused on the assessment of the bioaerosol concentration in the air of the Machnacz municipal solid waste landfill and its surrounding. Evaluation of air pollution was made during the autumn season. In the air collected with impactor sampler, the levels of indicator microorganisms - bacteria from the Enterobacteriaceae family, β-haemolytic bacteria, yeasts and yeast-like fungi - were determined. The proposed indicator microorganisms are different from those recommended by Polish Norm PN 89/Z-04111.01. This highlights the specific character of our method. Such selection of indicators allows not only assessing the air pollution of the landfill site but also determining the range of its impact on the surroundings. The results indicate that the landfill is a source of emission and dispersal of bacterial and fungal aerosol, despite its correct management and proper maintenance. The landfill influence on the microbial air quality reaches a distance of 1000-1200 m from the fence. The range of the influence indicates it to be a potential hazard for neighbouring residents.

Concentration of Bioaerosols in Composting Plants Using Different Quantification Methods

Abstract: Cladosporium spp.) and mites was performed. Concentrations of β-glucans as well as endotoxin and pyrogenic activities were also measured. The number of colony forming units (cfu) was determined by cultivation of moulds and actinomycetes in 36 additional dust samples. Results: With the exception of particle numbers, concentrations of all determined parameters showed significant correlations (P < 0.0001; r Spearman : 0.40–0.80), indicating a close association between these exposure markers. Colony numbers of mesophilic moulds and actinomycetes correlated also signifi cantly with data of cultivation-independent methods. Exposure levels showed generally large variations. However, all parameters were measured highest in dusty working areas like next to the shredder and during processing with the exception of Cladosporium antigens that were found in the highest concentrations in the delivery area. The lowest concentrations of dust, particles, antigens, and pyrogenic activity were determined in wheel loader cabins (WLCs), which were equipped with an air filtration system. Conclusion: It was possible to assess the microbial load of air in composting plants with different quantification methods. Since allergic and toxic reactions may be also caused by nonliving microorganisms,

Assessment of Workers’ Exposure to Bioaerosols in a French Cheese Factory

Abstract: Hundreds of different cheeses are produced in France, where 23.9kg of cheese were consumed per inhabitant in 2009, when it was ranked the second cheese-consuming nation. To meet this considerable demand, a large number of cheese factories exist where many workers, especially cheese washers, may be exposed to fungal bioaerosols that can lead to adverse toxinic and allergic effects. Airborne bacteria, fragments, or microbial by-products (endotoxins) are also found and contribute to total worker exposure. However, there is almost no published data concerning worker exposure or characteristics of bioaerosols emitted during these activities. Here, we measured the parameters (concentrations, species present, and size distribution) of the culturable fungal bioaerosol emitted in a French natural-rind cheese-maturing cellar. Concentrations of airborne bacteria and endotoxins were also measured. The main tasks were investigated using stationary or personal sampling over three consecutive days. Depending on the work area, high concentrations of culturable mesophilic microorganisms were measured (using closed-face cassettes): from 10(4) to 2×10(8) CFU m(-3) for fungi and from 10(3) to 10(6) CFU m(-3) for bacteria. These concentrations are 10- to 100000-fold higher than those measured at two reference points (indoor and outdoor) that are assumed not to be contaminated by the plant's activities. Endotoxin concentrations were between 10 and 300 EU m(-3) in the plant. Exposure was further assessed by identifying the predominant culturable fungi (allergenic Mucor fuscus and Penicillium sp.) and by measuring particle size distributions (cascade impactor). Airborne fungal entities (spores, mycelium strands and fragments, agglomerates, etc.) were found with aerodynamic diameters from 3 to over 20 µm. A metrological approach was used to fully characterize the culturable fungal aerosols generated during cheese maturing in this plant. The results show that workers are exposed to concentrations of airborne culturable fungi, sometimes very high, throughout the manufacturing process. In addition to fungi, culturable bacteria and endotoxins are also present in the work atmosphere. All these microbial organisms thus contribute in a complex manner to total worker exposure. Despite the lack of both occupational exposure limit values and standardized measuring methods, our results suggest that an immunological risk may occur among workers, especially for cheese brushers, cheese washers, and packagers who are the most exposed workers in the factory.

Detection of Aerosolized Biological Agents Using the Piezoelectric Immunosensor

Abstract: Airborne microorganisms are a major cause of respiratory diseases. Detection of pathogenic bacteria in the form of bioaerosols is required not only in peacetime but also in the threat of biological attacks. The label-free and direct detection of aerosolized biological agents is presented here. A desktop bioaerosol chamber for safe work with aerosolized microbial cells was constructed, and its functionality was tested. The model organisms (Escherichia coli) were disseminated using an aerosol generator in the chamber filled with either common laboratory indoor air or sterile air. The particles from the generated aerosol were collected using the cyclone SASS 2300, suspended in buffer and then analyzed using the piezoelectric immunosensor modified with specific capture antibodies. The frequency shifts indicated presence of the model biological agent with limit of detection of 1.45 × 10(4) CFU·L(-1) of air. The total time from sample collection to detection was 16 min. The system was fully automated and controlled remotely through a local network.

Physical and Biological Properties of Bioaerosols

Abstract: Bioaerosols include bacterial cells and spores, viruses, pollen, fungi, algae, detritus, allergens and cell fragments. Bioaerosol particles are usually a small fraction of all aerosol particles in our surroundings, but their impact can be critical. They are a means for transmission of disease, they cause allergic reactions and they have effects on the global climate, ecology and biodiversity. This chapter provides an overview of the main types of bioaerosol particles, their sources, transport and sinks, and their potential effects on health and atmosphere.

The evaluation of microbial contamination in the working environment of tanneries.

Abstract: BACKGROUND Due to their animal material processing, tannery workers may be exposed to biological agents. The aim of the study was the microbial contamination assessment of tanneries with different production specifications. Health risk was estimated based on particle size distribution. Moreover, indicators of microbial contamination of tanneries were selected. MATERIALS AND METHODS The studies were conducted in 2 types of tanneries - processing raw hides and producing chrome-tanned leather. Air was sampled with MAS-100 Eco Air Sampler, leathers using RODAC Envirocheck contact plates and swab method, microbial numbers were determined by a culture method. For the bioaerosols size distribution analysis, a six-stage Andersen sampler was used; identification was performed using microscopy and biochemical methods. Microbial contamination was identified by 16S RNA and ITS1/2 rDNA analysis for bacteria and fungi respectively. RESULTS The microbial number in the air ranged between 1.2 x 10(3) and 3.7 x 10(3) CFU/m3. While on the leather, it ranged between 7.6 x 10(1) and 5.5 x 10(5) CFU/100 cm2. Bacteria dominated in the tanneries (air: 51-92%, leathers: 60-100%). Results indicate that potential health risks arise from the fungal small bioaerosol particles presence (0.65-2.1 microm). Eleven indicator microorganisms were determined: B. pumilus, B. subtilis, B. cereus, C. lubricantis, C. cladosporioides, P. commune, P. echinulatum, P. chrysogenum, P. crustosum C. parapsilosis and C. albidus. CONCLUSIONS Microbial contamination evaluation in the tanneries showed the increased bacteria and fungi number in the air in relation to the outdoor air, which indicates an occupational inhalation risk to workers. The designated indicators of microbial contamination in the tanneries are associated with their specific and potentially pathogenic working environment.

Surface plasmon resonance-based bacterial aerosol detection.

Abstract: Aims: In the area of bioaerosol research, rapid methods for precise detection attracted much interest over last decades. One of such technologies operating in nearly real-time mode without any specific labelling is known as surface plasmon resonance (SPR). Recently, we validated a SPR protocol in conjunction with our earlier developed personal bioaerosol sampler for rapid detection of airborne viruses. Considering that the biological interaction between targeted micro-organism and corresponding antibody is strongly related to sizes of targeted micro-organisms, this research is vital validating suitability of SPR technique for bacterial aerosol detection, as characteristic size of bacteria is 2-3 orders of magnitude larger than sizes of common viruses. The combination of SPR with portable air sampling instrumentation could lead to the development of portable bioaerosol monitor. Methods and Results: This study is focussed on the SPR technology application for direct detection of common environmental bacterial strain-Escherichia coli. The detection limit of developed SPR techniques based on utilization of a planar gold sensor chip functionalized with polyclonal antibody via NeutrAvidin junction for sensing of bacterial cells was found to be 1·5 × 103 CFU ml-1, which corresponds to the limit of detection in the air to be 2·19 × 104 CFU l-1 for 1 min of sampling time. Conclusions: The technology was found fully suitable for rapid and reliable detection of large size bacterial aerosols. Low magnitude of the limit of detection looks very promising for sensitive detection of highly pathogenic airborne bacteria in the ambient air. Significance and Impact of the Study: The suggested technology based on a simple model organism is one of the first attempts to develop a real-time monitor for reliable detection of airborne bacteria. The outcomes would be of strong interest of professionals involved in monitoring and/or control of pathogenic airborne bacteria, including Legionella, Mycobacterium tuberculosis and Bacillus anthracis.