Bioaerosol

About: Bioaerosol is a research topic. Over the lifetime, 1347 publications have been published within this topic receiving 34791 citations.

Air-spore in Cartagena, Spain: viable and non-viable sampling methods.

Abstract: In the presented study the airborne fungal spores of the semiarid city of Cartagena, Spain, are identified and quantified by means of viable or non-viable sampling methods. Airborne fungal samples were collected simultaneously using a filtration method and a pollen and particle sampler based on the Hirst methodology. This information is very useful for elucidating geographical patterns of hay fever and asthma. The qualitative results showed that when the non-viable methodology was employed, Cladosporium, Ustilago, and Alternaria were the most abundant spores identified in the atmosphere of Cartagena, while the viable methodology showed that the most abundant taxa were: Cladosporium, Penicillium, Aspergillus and Alternaria. The quantitative results of airborne fungal spores identified by the Hirst-type air sampler (non-viable method), showed that Deuteromycetes represented 74% of total annual spore counts, Cladosporium being the major component of the fungal spectrum (62.2%), followed by Alternaria (5.3%), and Stemphylium (1.3%). The Basidiomycetes group represented 18.9% of total annual spore counts, Ustilago (7.1%) being the most representative taxon of this group and the second most abundant spore type. Ascomycetes accounted for 6.9%, Nectria (2.3%) being the principal taxon. Oomycetes (0.2%) and Zygomycestes and Myxomycestes (0.06%) were scarce. The prevailing species define our bioaerosol as typical of dry air. The viable methodology was better at identifying small hyaline spores and allowed for the discrimination of the genus of some spore types. However, non-viable methods revealed the richness of fungal types present in the bioaerosol. Thus, the use of both methodologies provides a more comprehensive characterization of the spore profile.

Characterizing bioaerosol risk from environmental sampling.

Abstract: In the aftermath of a release of microbiological agents, environmental sampling must be conducted to characterize the release sufficiently so that mathematical models can then be used to predict the subsequent dispersion and human health risks. Because both the dose–response and environmental transport of aerosolized microbiological agents are functions of the effective aerodynamic diameter of the particles, environmental assessments should consider not only the total amount of agents but also the size distributions of the aerosolized particles. However, typical surface sampling cannot readily distinguish among different size particles. This study evaluates different approaches to estimating risk from measurements of microorganisms deposited on surfaces after an aerosol release. For various combinations of sampling surfaces, size fractions, HVAC operating conditions, size distributions of release spores, uncertainties in surface measurements, and the accuracy of model predictions are tested in order to as...

Evaluating bioaerosol exposure among bus drivers in the public transport sector

Abstract: Occupational hazards and consequent health problems suffered by drivers in the public transport sector require preventive measures. The aim of this study was to assess the exposure of drivers to microbiological air contamination (airborne bacteria and fungi) in buses. The air in public transport vehicles was examined in autumn, winter and spring. To evaluate the exposure of drivers to bioaerosols, air samples were collected and examined for the total number of bacteria and fungi in the air, the number of mesophilic aerobic bacteria specified by the number of colony forming units (CFU) per 1 m3 of air. The results of the research show that public transport as a workplace can be considered to be a significant risk to health.

Evaluation of micro-well collector for capture and analysis of aerosolized Bacillus subtilis spores.

Abstract: Bioaerosol sampling and identification are vital for the assessment and control of airborne pathogens, allergens, and toxins. In-situ analysis of chemical and biological particulate matter can significantly reduce the costs associated with sample preservation, transport, and analysis. The analysis of conventional filters is challenging, due to dilute samples in large collection regions. A low-cost cartridge for collection and analysis of aerosols is developed for use in epidemiological studies and personal exposure assessments. The cartridge collects aerosol samples in a micro-well which reduces particles losses due to the bounce and does not require any coating. The confined particle collection area (dwell~1.4 mm) allows reducing the elution volume for subsequent analysis. The performance of the cartridge is validated in laboratory studies using aerosolized bacterial spores (Bacillus subtilis). Colony forming unit analysis is used for bacterial spore enumeration. Cartridge collection efficiency is evaluated by comparison with the reference filters and found to be consistent with tested flow rates. Sample recovery for the pipette elution is ~80%. Due to the high density of the collected sample, the cartridge is compatible with in-situ spectroscopic analysis and sample elution into the 10–20 μl liquid volume providing a significant increase in sample concentration for subsequent analysis.

Long-term viable bioaerosol sampling using a temperature- and humidity-controlled filtration apparatus, a laboratory investigation using culturable E. coli.

Abstract: Sampling for culturable (e.g., viable) aerosolized microbes (bioaerosols) is a useful means to provide information for public health monitoring and studies. However, it is challenging to maintain microbe culturability when sampling at high flow rates (>12 L/min) and extended periods of time (≥4 h). We developed a first-generation, viable bioaerosol collection system (VBCS) utilizing temperature (T) and relative humidity (RH)–conditioned filtration at a flow rate of 25 L/min. A two-stage system of tube-in-shell Nafion™ exchange units provides cooling to ≤10°C and RH conditioning to 80–95%. Aerosol particles are collected on a polyurethane nanofiber filter providing a physical collection efficiency of >95% for sizes 0.06–10 µm. The T and RH conditions at the collection filter are maintained, despite changes to ambient conditions. The initial testing of the VBCS was done under indoor, laboratory conditions with aerosolized, vegetative E. coli. A scenario of a 30-min challenge of bioaerosol followed b...