Topic
Bismuth vanadate
About: Bismuth vanadate is a research topic. Over the lifetime, 1390 publications have been published within this topic receiving 37646 citations. The topic is also known as: Bismuth vanadium oxide & Bismuth vanadate.
Papers published on a yearly basis
Papers
More filters
TL;DR: It is demonstrated that a nanoporous morphology effectively suppresses bulk carrier recombination without additional doping, manifesting an electron-hole separation yield of 0.90 at 1.23 volts (V) versus the reversible hydrogen electrode (RHE).
Abstract: Bismuth vanadate (BiVO4) has a band structure that is well-suited for potential use as a photoanode in solar water splitting, but it suffers from poor electron-hole separation. Here, we demonstrate that a nanoporous morphology (specific surface area of 31.8 square meters per gram) effectively suppresses bulk carrier recombination without additional doping, manifesting an electron-hole separation yield of 0.90 at 1.23 volts (V) versus the reversible hydrogen electrode (RHE). We enhanced the propensity for surface-reaching holes to instigate water-splitting chemistry by serially applying two different oxygen evolution catalyst (OEC) layers, FeOOH and NiOOH, which reduces interface recombination at the BiVO4/OEC junction while creating a more favorable Helmholtz layer potential drop at the OEC/electrolyte junction. The resulting BiVO4/FeOOH/NiOOH photoanode achieves a photocurrent density of 2.73 milliamps per square centimenter at a potential as low as 0.6 V versus RHE.
2,361 citations
TL;DR: In this paper, highly crystalline monoclinic and tetragonal BiVO4 photocatalysts were obtained by the reaction of layered potassium vanadate powder (KV3O8 and K3V5O14) with Bi(NO3)3 for 3 days in aqueous media at room temperature.
Abstract: BiVO4 photocatalysts for O2 evolution, which work under visible light irradiation, were prepared by an aqueous process. The BiVO4 photocatalysts were obtained by the reaction of layered potassium vanadate powder (KV3O8 and K3V5O14) with Bi(NO3)3 for 3 days in aqueous media at room temperature. Highly crystalline monoclinic and tetragonal BiVO4 were selectively synthesized by changing the ratio of vanadium to bismuth in the starting materials. X-ray diffraction and scanning electron microscopy measurements showed that the monoclinic BiVO4 was formed via a tetragonal BiVO4 intermediate. Tetragonal BiVO4 with a 2.9 eV band gap mainly possessed an ultraviolet absorption band while monoclinic BiVO4 with a 2.4 eV band gap had a characteristic visible light absorption band in addition to the UV band. The UV bands observed in the tetragonal and monoclinic BiVO4 were assigned to the band transition from O2p to V3d whereas the visible light absorption was due to the transition from a valence band formed by Bi6s or ...
1,761 citations
TL;DR: The results show that the photogenrated electrons and holes can be separated between the different facets of semiconductor crystals, which may be useful in semiconductor physics and chemistry to construct highly efficient solar energy conversion systems.
Abstract: Charge separation is crucial for increasing the activity of semiconductor-based photocatalysts, especially in water splitting reactions. Here we show, using monoclinic bismuth vanadate crystal as a model photocatalyst, that efficient charge separation can be achieved on different crystal facets, as evidenced by the reduction reaction with photogenerated electrons and oxidation reaction with photogenerated holes, which take place separately on the {010} and {110} facets under photo-irradiation. Based on this finding, the reduction and oxidation cocatalysts are selectively deposited on the {010} and {110} facets respectively, resulting in much higher activity in both photocatalytic and photoelectrocatalytic water oxidation reactions, compared with the photocatalyst with randomly distributed cocatalysts. These results show that the photogenrated electrons and holes can be separated between the different facets of semiconductor crystals. This finding may be useful in semiconductor physics and chemistry to construct highly efficient solar energy conversion systems.
1,422 citations
TL;DR: By combining this state-of-the-art photoanode with an earth-abundant cobalt phosphate water-oxidation catalyst and a double- or single-junction amorphous Si solar cell in a tandem configuration, stable short-circuit water-splitting photocurrents of ~4 and 3 mA cm(-2) are achieved under 1 sun illumination.
Abstract: The photoactivity of metal oxide electrodes for water splitting is often limited by poor charge separation. Abdi et al. improve the solar-to-hydrogen efficiency in a hybrid device that comprises a gradient-doped bismuth vanadate photoanode and a double-junction amorphous silicon tandem solar cell.
1,126 citations
TL;DR: In this article, the photocatalytic activity of tetragonal BiVO4 for O2 evolution from an aqueous AgNO3 solution under visible light irradiation was negligible.
Abstract: BiVO4 powder with scheelite structure was obtained by hydrolyzing a nitric acid solution of Bi(NO3)3 and Na3VO4 with bases (Na2CO3 and NaHCO3) at room temperature. Tetragonal BiVO4 of a high-temperature form was obtained after 4.5 h of preparation time while monoclinic BiVO4 was done after 46 h. Although the structure and the band gap of tetragonal BiVO4 with scheelite structure were similar to those of monoclinic BiVO4, the photocatalytic activity of the tetragonal BiVO4 for O2 evolution from an aqueous AgNO3 solution under visible light irradiation was negligible. In contrast, the monoclinic BiVO4 showed high photocatalytic activity. Distortion of a Bi−O polyhedron by a 6s2 lone pair of Bi3+ plays an important role for high photocatalytic activity of the monoclinic BiVO4 under visible light irradiation.
947 citations