Topic
Boron oxide
About: Boron oxide is a research topic. Over the lifetime, 3034 publications have been published within this topic receiving 36996 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: A tin-based amorphous composite oxide (TCO) was synthesized in this paper to replace the carbon-based lithium intercalation materials currently in extensive use as the negative electrode (anode) of lithium-ion rechargeable batteries.
Abstract: A high-capacity lithium-storage material in metal-oxide form has been synthesized that can replace the carbon-based lithium intercalation materials currently in extensive use as the negative electrode (anode) of lithium-ion rechargeable batteries. This tin-based amorphous composite oxide (TCO) contains Sn(II)-O as the active center for lithium insertion and other glass-forming elements, which make up an oxide network. The TCO anode yields a specific capacity for reversible lithium adsorption more than 50 percent higher than those of the carbon families that persists after charge-discharge cycling when coupled with a lithium cobalt oxide cathode. Lithium-7 nuclear magnetic resonance measurements evidenced the high ionic state of lithium retained in the charged state, in which TCO accepted 8 moles of lithium ions per unit mole.
2,470 citations
TL;DR: In this paper, the sheet resistance of graphite oxide film reduced using sodium borohydride (NaBH4) is much lower than that of films reduced using hydrazine (N2H4).
Abstract: The conductivity of graphite oxide films is modulated using reducing agents. It is found that the sheet resistance of graphite oxide film reduced using sodium borohydride (NaBH4) is much lower than that of films reduced using hydrazine (N2H4). This is attributed to the formation of CN groups in the N2H4 case, which may act as donors compensating the hole carriers in reduced graphite oxide. In the case of NaBH4 reduction, the interlayer distance is first slightly expanded by the formation of intermediate boron oxide complexes and then contracted by the gradual removal of carbonyl and hydroxyl groups along with the boron oxide complexes. The fabricated conducting film comprising a NaBH4-reduced graphite oxide reveals a sheet resistance comparable to that of dispersed graphene.
2,075 citations
TL;DR: The photodegradation mechanisms for two typical dyes, rhodamine B (Rh B) and methyl orange (MO), are proposed based on comparison experiments and the electron paramagnetic resonance was used to detect the active species for the photodegrading reaction over g-C(3)N(4).
Abstract: Graphitic carbon nitride (g-C3N4) and boron-doped g-C3N4 were prepared by heating melamine and the mixture of melamine and boron oxide, respectively. X-ray diffraction, X-ray photoelectron spectroscopy, and UV−vis spectra were used to describe the properties of as-prepared samples. The electron paramagnetic resonance was used to detect the active species for the photodegradation reaction over g-C3N4. The photodegradation mechanisms for two typical dyes, rhodamine B (Rh B) and methyl orange (MO), are proposed based on our comparison experiments. In the g-C3N4 photocatalysis system, the photodegradation of Rh B and MO is attributed to the direct hole oxidation and overall reaction, respectively; however, for the MO photodegradation the reduction process initiated by photogenerated electrons is a major photocatalytic process compared with the oxidation process induced by photogenerated holes. Boron doping for g-C3N4 can promote photodegradation of Rh B because the boron doping improves the dye adsorption and...
1,495 citations
TL;DR: In this paper, boron atoms are doped into graphene frameworks forming borton doped graphene (BG) via a catalyst-free thermal annealing approach in the presence of BORON oxide, which has a flake-like structure with an average thickness of ca. 2 nm.
Abstract: Boron atoms, with strong electron-withdrawing capability, are doped into graphene frameworks forming boron doped graphene (BG) via a catalyst-free thermal annealing approach in the presence of boron oxide. Atomic force microscopic (AFM) and transmission electron microscopic (TEM) characterizations reveal that the as-prepared BG has a flake-like structure with an average thickness of ca. 2 nm. X-ray photoelectron spectroscopy (XPS) analysis demonstrates that boron atoms can be successfully doped into graphene structures with the atomic percentage of 3.2%. Due to its particular structure and unique electronic properties, the resultant BG exhibits excellent electrocatalytic activity towards oxygen reduction reaction (ORR) in alkaline electrolytes, similar to the performance of Pt catalysts. In addition, the non-metallic BG catalyst shows long-term stability and good CO tolerance superior to that of Pt-based catalysts. These results demonstrate that the BG, as a promising candidate in advanced electrode materials, may substitute Pt-based nanomaterials as a cathode catalyst for ORR in fuel cells as well as other electrochemical applications similar to the reported nitrogen doped graphene.
755 citations
TL;DR: In this article, it was shown that bulk specimens (0.4-4 g mass) of the alloy Pd40Ni40P20 have been undercooled consistently to the glass state with no detectable superficial crystallinity, in a molten flux of dehydrated boron oxide.
Abstract: Bulk specimens (0.4-4 g mass) of the alloy Pd40Ni40P20 have been undercooled consistently to the glass state, with no detectable superficial crystallinity, in a molten flux of dehydrated boron oxide. The minimum dimension of the most massive glass specimen, so formed, was 1.0 cm. The absence of crystallinity in the specimens was confirmed by X-ray diffraction, scanning electron microscopy, and calorimetry.
539 citations