Buffer solution

About: Buffer solution is a research topic. Over the lifetime, 6948 publications have been published within this topic receiving 112440 citations. The topic is also known as: pH buffer & buffer.

Characterization of poly-L-lysine adsorption onto alkanethiol-modified gold surfaces with polarization-modulation Fourier transform infrared spectroscopy and surface plasmon resonance measurements

Abstract: The electrostatic adsorption of poly-L-lysine molecules onto a vapor-deposited gold film modified with a carboxylic acid-terminated alkanethiol monolayer is monitored with the spectroscopic techniques of polarization-modulation Fourier transform infrared (PM-FTIR) spectroscopy and surface plasmon resonance (SPR). The PM-ITIR spectrum of a monolayer of poly-L-lysine (PL) adsorbed onto a self-assembled monolayer of 11-mercaptoundecanoic acid (MUA) indicates that the lysine residues and the MUA carboxylic acid moieties form ammonium-carboxylate ion pairs which electrostatically bind the polypeptide to the surface. The PL molecules can be desorbed from the surface by rinsing with a buffer solution at a pH that destroys the ion pairing (pH 12). Measurements of the shift in the SPR angle upon adsorption were used to determine the thicknesses of the adsorbed monolayers; the MUA and PL monolayers were found to be 17.0 and 10.5 A thick, respectively. These thickness results suggest that the poly-L-lysine monolayer adsorbs onto the packed MUA surface in an extended conformation with the PL backbone lying parallel to the surface. Subsequent exposure ofthe PL monolayer to a solution ofiron phthalocyanine tetracarboxylic acid (FePc) resulted in the adsorption of a third layer onto the surface. The ability of the adsorbed PL molecules to interact with FePc indicates the presence of free lysine residues available for interaction with molecules other than the MUA monolayer.

Enzymatic Saccharification of Lignocelluloses Should be Conducted at Elevated pH 5.2–6.2

Abstract: This study revealed that cellulose enzymatic saccharification response curves of lignocellulosic substrates were very different from those of pure cellulosic substrates in terms of optimal pH and pH operating window. The maximal enzymatic cellulose saccharification of lignocellulosic substrates occurs at substrate suspension pH 5.2–6.2, not between pH 4.8 and 5.0 as exclusively used in literature using T. reesi cellulase. Two commercial cellulase enzyme cocktails, Celluclast 1.5L and CTec2 both from Novozymes, were evaluated over a wide range of pH. The optimal ranges of measured suspension pH of 5.2–5.7 for Celluclast 1.5L and 5.5–6.2 for CTec2 were obtained using six lignocellulosic substrates produced by dilute acid, alkaline, and two sulfite pretreatments to overcome recalcitrance of lignocelluloses (SPORL) pretreatments using both a softwood and a hardwood. Furthermore, cellulose saccharification efficiency of a SPORL-pretreated lodgepole pine substrate showed a very steep increase between pH 4.7 and 5.2. Saccharification efficiency can be increased by 80 % at cellulase loading of 11.3 FPU/g glucan, i.e., from approximately 43 to 78 % simply by increasing the substrate suspension pH from 4.7 to 5.2 (buffer solution pH from 4.8 to 5.5) using Celluclast 1.5L, or by 70 % from approximately 51 to 87 % when substrate suspension pH is increased from 4.9 to 6.2 (buffer solution pH from 5.0 to 6.5) using CTec2. The enzymatic cellulose saccharification response to pH is correlated to the degree of substrate lignin sulfonation. The difference in pH-induced lignin surface charge, and therefore surface hydrophilicity and lignin–cellulase electrostatic interactions, among different substrates with different lignin content and structure is responsible for the reported different enhancements in lignocellulose saccharification at elevated pH.

Potentiometric sensor based on molecularly imprinted polymer for determination of melamine in milk

Abstract: A polymeric membrane ion-selective electrode for determination of melamine is described in this paper. it is based on a molecularly imprinted polymer (MIP) for selective recognition, which can be synthesized by using melamine as a template molecule, methacrylic acid as a functional monomer and ethylene glycol dimethacrylate as a cross-linking agent. The membrane electrode shows near-Nernstian response (54 mV/decade) to the protonated melamine over the concentration range of 5.0 x 10(-6) to 1.0 x 10(-2) mol L(-1). The electrode exhibits a short response time of similar to 16 s and can be stable for more than 2 months. Combined with flow analysis system, the potentiometric sensor has been successfully applied to the determination of melamine in milk samples. Interference from high concentrations of ions co-existing in milk samples such as K(+) and Na(+) can be effectively eliminated by on-line introduction of anion- and cation-exchanger tandem columns placed upstream, while melamine existing as neutral molecules in milk of pH 6.7 can flow through the ion-exchanger columns and be measured downstream by the proposed electrode in an acetate buffer solution of pH 3.7. (C) 2009 Elsevier BY. All rights reserved.

The effect of electric field strength, buffer type and concentration on separation parameters in capillary zone electrophoresis

Abstract: Probe solutes were used to investigate the effect of buffer type, concentration and applied voltage on solute mobility, column efficiency and resolution in capillary zone electrophoresis. With low conductivity buffers higher concentrations and/or higher voltages could be used to improve column efficiency and resolution. Doubling the concentration of the buffer doubles the amount of heat generated inside the column while doubling the applied voltage cause a 4-fold increase. Solute migration time is approximately an inverse function of the charge density of the buffer's cation. Analysis time is increased by about 30% if the buffer concentration is doubled while it is cut in half if the applied voltage is doubled. Column efficiency is improved (higher theoretical plate count) with increasing buffer concentration and/or applied voltage as long as the heat generated is efficiently dissipated. The separation factor is directly related to analysis time and, therefore, selectivity improves with increasing buffer concentration but decreases with increasing applied voltage. Hence, resolution is optimized by increasing buffer concentration at a moderate applied voltage.

Sensitive measurement of NH4+ 15N/14N (δ15NH4+) at natural abundance levels in fresh and saltwaters

Abstract: We report a new method for determining the 15N/14N of NH4+ at natural abundance level in both freshwater and seawater. NH4+ is first quantitatively oxidized to NO2- by hypobromite (BrO-) at pH ∼ 12. After the addition of sodium arsenite to consume excess BrO-, yield is verified by colorimetric NO2- determination. NO2- is further reduced to N2O using a 1:1 sodium azide and acetic acid buffer solution using previously established procedures. The product N2O is then analyzed for isotopic composition using a continuous flow purge and cryogenic trap system coupled to an isotope ratio mass spectrometer. Reliable δ15N values (standard deviation is 0.3‰ or better) are obtained over an NH4+ concentration range of 0.5−10 μM using 20 mL volumes of either freshwater or seawater samples. Higher concentration samples are readily diluted to lower concentration. Preexisting NO2- is removed by treatment with sulfanilic acid. There is no interference from any of the nitrogen-containing compounds tested except short-chain a...