Calibration curve

About: Calibration curve is a research topic. Over the lifetime, 6552 publications have been published within this topic receiving 95128 citations.

Determination of refractory elements in used lubricating oil by ICPOES employing emulsified sample introduction and calibration with inorganic standards.

Abstract: The quantification of trace elements in used lubricating oil is useful for evaluating the wearing of specific components of engines. In the present work, inductively coupled plasma optical emission spectrometry (ICPOES) was used for determining five refractory elements (Ni, Mo, Cr, V and Ti) in lubricating-oil samples. The methodology was developed while aiming at the introduction of such organic samples into the ICP as emulsions. Several nebulization systems were tested with clear advantage for Meinhard K3 coupled with a cyclonic spray chamber. The carbon deposition on the injector tip as well as the plasma background was minimized through careful optimization of the Ar and O2 gas mixture flows into the plasma. The optimization of instrumental and experimental parameters allowed quantification using calibration curves prepared with analyte inorganic standards. An internal standard (Sc) was used to correct the matrix effects and signal fluctuations. The limits of detection (3Sb/m), in the ng g-1 range were obtained for all five elements. The methodology was validated through an analysis of standard reference materials (SRM 1084a, 1085a and 1085b). Good analyte recoveries (from 92.6 to 104.7%) were achieved. Comparison studies against established ICPOES methodologies (sample acid decomposition or sample direct dilution in an organic solvent) have shown that the proposed methodology present clear advantages in terms of simplicity of sample preparation, overall analysis time, and the use of inorganic standards for calibration instead of expensive metallorganic standards.

Formal statistical models for estimating radiocarbon calibration curves.

Abstract: We report on the development and implementation of a model-based statistical method for the estimation of radiocarbon calibration curves using diverse data. The method takes account of uncertainty on both the (super 14) C and calendar scales, coherently integrating data, the calendar age estimates of which arise from different dating methods. It also allows for correlation between observations, if they have particular sources of uncertainty in common. We adopt an approach based on a random walk model, tailoring it to take account of possible calendar age offsets between different data sources by adding a random effect component. The latter allows us to use the same modeling framework for constructing the new calibration curve IntCal04, the comparison curve NotCal04, the Southern Hemisphere curve SHCal04, and the marine calibration curve Marine04.

Application of solid-phase microextraction in the determination of diazepam binding to human serum albumin.

Abstract: In this paper, protein-drug interactions were studied by solid-phase microextraction (SPME) using diazepam binding to human serum albumin as a model system. Since drug compounds are normally polar and nonvolatile by nature, direct SPME is used in this work. The SPME extraction is an equilibrium process among the concentrations of the analyte partitioned onto the SPME fiber, free and bound drug in the solution. A calibration curve was first constructed by employing the amount of the analytes partitioned on the fiber versus the free analyte concentration in the solution in the absence of protein. In method I, the extraction was performed in the protein solution with known diazepam concentration. In method II, diazepam was first loaded onto the fiber by extracting in solution with known diazepam concentration. This fiber was subsequently transferred into the protein solution for desorption. The amount of the analyte left on the fiber was analyzed after the system reached equilibrium. The free drug concentration was then obtained from the calibration curve for both methods. The Scatchard plot was finally employed to obtain the number of binding sites and the equilibrium binding constants. Since only a very small amount of the protein solution is required (150 microL for each extraction), method II is very useful for circumstances where the protein amount is very limited. The direct measurement method proposed in this paper does not need a GC response factor, which significantly decreases the experimental error. The only measurement needed is the area count change (ratio) of the fiber injections before and after the protein was introduced into the solution. The difference between the direct measurement method for method I and method II is discussed. The result illustrated that the SPME direct measurement method provided both theoretical accuracy and simplicity in such applications.