Topic
Carbon nanotube metal matrix composites
About: Carbon nanotube metal matrix composites is a research topic. Over the lifetime, 1368 publications have been published within this topic receiving 107369 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, the amplitude of the intrinsic thermal vibrations of isolated carbon nanotubes was measured in the transmission electron microscopy (TEM) and it was shown that they have exceptionally high Young's moduli, in the terapascal (TPa) range.
Abstract: CARBON nanotubes are predicted to have interesting mechanical properties—in particular, high stiffness and axial strength—as a result of their seamless cylindrical graphitic structure1–5. Their mechanical properties have so far eluded direct measurement, however, because of the very small dimensions of nanotubes. Here we estimate the Young's modulus of isolated nanotubes by measuring, in the transmission electron microscope, the amplitude of their intrinsic thermal vibrations. We find that carbon nanotubes have exceptionally high Young's moduli, in the terapascal (TPa) range. Their high stiffness, coupled with their low density, implies that nanotubes might be useful as nanoscale fibres in strong, lightweight composite materials.
5,207 citations
TL;DR: The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a "nanostressing stage" located within a scanning electron microscope and a variety of structures were revealed, such as a nanotube ribbon, a wave pattern, and partial radial collapse.
Abstract: The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a “nanostressing stage” located within a scanning electron microscope. The tensile-loading experiment was prepared and observed entirely within the microscope and was recorded on video. The MWCNTs broke in the outermost layer (“sword-in-sheath” failure), and the tensile strength of this layer ranged from 11 to 63 gigapascals for the set of 19 MWCNTs that were loaded. Analysis of the stress-strain curves for individual MWCNTs indicated that the Young's modulus E of the outermost layer varied from 270 to 950 gigapascals. Transmission electron microscopic examination of the broken nanotube fragments revealed a variety of structures, such as a nanotube ribbon, a wave pattern, and partial radial collapse.
5,011 citations
TL;DR: A review of recent advances in carbon nanotubes and their composites can be found in this article, where the authors examine the research work reported in the literature on the structure and processing of carbon Nanotubes.
4,709 citations
TL;DR: In this paper, an extended account of the various chemical strategies for grafting polymers onto carbon nanotubes and the manufacturing of carbon-nanotube/polymer nanocomposites is given.
2,766 citations
TL;DR: In this paper, in situ transmission electron microscopy studies provided information regarding composite deformation mechanisms and interfacial bonding between the multi-wall carbon nanotubes and polymer matrix, indicating significant load transfer across the nanotube-matrix interface.
Abstract: Multiwall carbon nanotubes have been dispersed homogeneously throughout polystyrene matrices by a simple solution-evaporation method without destroying the integrity of the nanotubes. Tensile tests on composite films show that 1 wt % nanotube additions result in 36%–42% and ∼25% increases in elastic modulus and break stress, respectively, indicating significant load transfer across the nanotube-matrix interface. In situ transmission electron microscopy studies provided information regarding composite deformation mechanisms and interfacial bonding between the multiwall nanotubes and polymer matrix.
2,431 citations