Showing papers on "Catalysis published in 2011"
TL;DR: The Co₃O₄/N-doped graphene hybrid exhibits similar catalytic activity but superior stability to Pt in alkaline solutions, making it a high-performance non-precious metal-based bi-catalyst for both ORR and OER.
Abstract: Catalysts for oxygen reduction and evolution reactions are at the heart of key renewable-energy technologies including fuel cells and water splitting. Despite tremendous efforts, developing oxygen electrode catalysts with high activity at low cost remains a great challenge. Here, we report a hybrid material consisting of Co₃O₄ nanocrystals grown on reduced graphene oxide as a high-performance bi-functional catalyst for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Although Co₃O₄ or graphene oxide alone has little catalytic activity, their hybrid exhibits an unexpected, surprisingly high ORR activity that is further enhanced by nitrogen doping of graphene. The Co₃O₄/N-doped graphene hybrid exhibits similar catalytic activity but superior stability to Pt in alkaline solutions. The same hybrid is also highly active for OER, making it a high-performance non-precious metal-based bi-catalyst for both ORR and OER. The unusual catalytic activity arises from synergetic chemical coupling effects between Co₃O₄ and graphene.
4,898 citations
TL;DR: Density functional theory calculations show that the high catalytic activity correlates with the partially vacant 5d orbitals of the positively charged, high-valent Pt atoms, which help to reduce both the CO adsorption energy and the activation barriers for CO oxidation.
Abstract: Platinum-based heterogeneous catalysts are critical to many important commercial chemical processes, but their efficiency is extremely low on a per metal atom basis, because only the surface active-site atoms are used. Catalysts with single-atom dispersions are thus highly desirable to maximize atom efficiency, but making them is challenging. Here we report the synthesis of a single-atom catalyst that consists of only isolated single Pt atoms anchored to the surfaces of iron oxide nanocrystallites. This single-atom catalyst has extremely high atom efficiency and shows excellent stability and high activity for both CO oxidation and preferential oxidation of CO in H-2. Density functional theory calculations show that the high catalytic activity correlates with the partially vacant 5d orbitals of the positively charged, high-valent Pt atoms, which help to reduce both the CO adsorption energy and the activation barriers for CO oxidation.
4,446 citations
TL;DR: In this article, a selective solvothermal synthesis of MoS2 nanoparticles on reduced graphene oxide (RGO) sheets suspended in solution was developed, which exhibited superior electrocatalytic activity in the hydrogen evolution reaction (HER).
Abstract: Advanced materials for electrocatalytic and photoelectrochemical water splitting are central to the area of renewable energy. In this work, we developed a selective solvothermal synthesis of MoS2 nanoparticles on reduced graphene oxide (RGO) sheets suspended in solution. The resulting MoS2/RGO hybrid material possessed nanoscopic few-layer MoS2 structures with an abundance of exposed edges stacked onto graphene, in strong contrast to large aggregated MoS2 particles grown freely in solution without GO. The MoS2/RGO hybrid exhibited superior electrocatalytic activity in the hydrogen evolution reaction (HER) relative to other MoS2 catalysts. A Tafel slope of ∼41 mV/decade was measured for MoS2 catalysts in the HER for the first time; this exceeds by far the activity of previous MoS2 catalysts and results from the abundance of catalytic edge sites on the MoS2 nanoparticles and the excellent electrical coupling to the underlying graphene network. The ∼41 mV/decade Tafel slope suggested the Volmer–Heyrovsky mec...
4,370 citations
TL;DR: The high activity of BSCF was predicted from a design principle established by systematic examination of more than 10 transition metal oxides, which showed that the intrinsic OER activity exhibits a volcano-shaped dependence on the occupancy of the 3d electron with an eg symmetry of surface transition metal cations in an oxide.
Abstract: The efficiency of many energy storage technologies, such as rechargeable metal-air batteries and hydrogen production from water splitting, is limited by the slow kinetics of the oxygen evolution reaction (OER). We found that Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3–δ (BSCF) catalyzes the OER with intrinsic activity that is at least an order of magnitude higher than that of the state-of-the-art iridium oxide catalyst in alkaline media. The high activity of BSCF was predicted from a design principle established by systematic examination of more than 10 transition metal oxides, which showed that the intrinsic OER activity exhibits a volcano-shaped dependence on the occupancy of the 3d electron with an e g symmetry of surface transition metal cations in an oxide. The peak OER activity was predicted to be at an e g occupancy close to unity, with high covalency of transition metal–oxygen bonds.
3,876 citations
TL;DR: A family of non–precious metal catalysts that approach the performance of platinum-based systems at a cost sustainable for high-power fuel cell applications, possibly including automotive power.
Abstract: The prohibitive cost of platinum for catalyzing the cathodic oxygen reduction reaction (ORR) has hampered the widespread use of polymer electrolyte fuel cells. We describe a family of non-precious metal catalysts that approach the performance of platinum-based systems at a cost sustainable for high-power fuel cell applications, possibly including automotive power. The approach uses polyaniline as a precursor to a carbon-nitrogen template for high-temperature synthesis of catalysts incorporating iron and cobalt. The most active materials in the group catalyze the ORR at potentials within ~60 millivolts of that delivered by state-of-the-art carbon-supported platinum, combining their high activity with remarkable performance stability for non-precious metal catalysts (700 hours at a fuel cell voltage of 0.4 volts) as well as excellent four-electron selectivity (hydrogen peroxide yield <1.0%).
3,464 citations
3,322 citations
TL;DR: In this article, a large database of HO* and HOO* adsorption energies on oxide surfaces was used to analyze the reaction free energy diagrams of all the oxides in a general way.
Abstract: Trends in electrocatalytic activity of the oxygen evolution reaction (OER) are investigated on the basis of a large database of HO* and HOO* adsorption energies on oxide surfaces. The theoretical overpotential was calculated by applying standard density functional theory in combination with the computational standard hydrogen electrode (SHE) model. We showed that by the discovery of a universal scaling relation between the adsorption energies of HOO* vs HO*, it is possible to analyze the reaction free energy diagrams of all the oxides in a general way. This gave rise to an activity volcano that was the same for a wide variety of oxide catalyst materials and a universal descriptor for the oxygen evolution activity, which suggests a fundamental limitation on the maximum oxygen evolution activity of planar oxide catalysts.
2,923 citations
TL;DR: A facile, catalyst-free thermal annealing approach for large-scale synthesis of NG using low-cost industrial material melamine as the nitrogen source is proposed, which can completely avoid the contamination of transition metal catalysts, and thus the intrinsic catalytic performance of pure NGs can be investigated.
Abstract: The electronic and chemical properties of graphene can be modulated by chemical doping foreign atoms and functional moieties. The general approach to the synthesis of nitrogen-doped graphene (NG), such as chemical vapor deposition (CVD) performed in gas phases, requires transitional metal catalysts which could contaminate the resultant products and thus affect their properties. In this paper, we propose a facile, catalyst-free thermal annealing approach for large-scale synthesis of NG using low-cost industrial material melamine as the nitrogen source. This approach can completely avoid the contamination of transition metal catalysts, and thus the intrinsic catalytic performance of pure NGs can be investigated. Detailed X-ray photoelectron spectrum analysis of the resultant products shows that the atomic percentage of nitrogen in doped graphene samples can be adjusted up to 10.1%. Such a high doping level has not been reported previously. High-resolution N1s spectra reveal that the as-made NG mainly contai...
2,242 citations
TL;DR: These findings reflect the critical influences of the σ orbital and metal-oxygen covalency on the competition between O(2)(2-)/OH(-) displacement and OH(-) regeneration on surface transition-metal ions as the rate-limiting steps of the ORR, and highlight the importance of electronic structure in controlling oxide catalytic activity.
Abstract: The prohibitive cost and scarcity of the noble-metal catalysts needed for catalysing the oxygen reduction reaction (ORR) in fuel cells and metal-air batteries limit the commercialization of these clean-energy technologies. Identifying a catalyst design principle that links material properties to the catalytic activity can accelerate the search for highly active and abundant transition-metal-oxide catalysts to replace platinum. Here, we demonstrate that the ORR activity for oxide catalysts primarily correlates to σ-orbital (e(g)) occupation and the extent of B-site transition-metal-oxygen covalency, which serves as a secondary activity descriptor. Our findings reflect the critical influences of the σ orbital and metal-oxygen covalency on the competition between O(2)(2-)/OH(-) displacement and OH(-) regeneration on surface transition-metal ions as the rate-limiting steps of the ORR, and thus highlight the importance of electronic structure in controlling oxide catalytic activity.
2,241 citations
TL;DR: It is found that a controlled arrangement of nanometer-scale Ni(OH)2 clusters on platinum electrode surfaces manifests a factor of 8 activity increase in catalyzing the hydrogen evolution reaction relative to state-of-the-art metal and metal-oxide catalysts.
Abstract: Improving the sluggish kinetics for the electrochemical reduction of water to molecular hydrogen in alkaline environments is one key to reducing the high overpotentials and associated energy losses in water-alkali and chlor-alkali electrolyzers. We found that a controlled arrangement of nanometer-scale Ni(OH)(2) clusters on platinum electrode surfaces manifests a factor of 8 activity increase in catalyzing the hydrogen evolution reaction relative to state-of-the-art metal and metal-oxide catalysts. In a bifunctional effect, the edges of the Ni(OH)(2) clusters promoted the dissociation of water and the production of hydrogen intermediates that then adsorbed on the nearby Pt surfaces and recombined into molecular hydrogen. The generation of these hydrogen intermediates could be further enhanced via Li(+)-induced destabilization of the HO-H bond, resulting in a factor of 10 total increase in activity.
2,176 citations
TL;DR: The first application of a new COF material, COF-LZU1, for highly efficient catalysis, which possesses a two-dimensional eclipsed layered-sheet structure, making its incorporation with metal ions feasible.
Abstract: Covalent organic frameworks (COFs) are crystalline porous solids with well-defined two- or three-dimensional molecular structures. Although the structural regularity provides this new type of porous material with high potentials in catalysis, no example has been presented so far. Herein, we report the first application of a new COF material, COF-LZU1, for highly efficient catalysis. The easily prepared imine-linked COF-LZU1 possesses a two-dimensional eclipsed layered-sheet structure, making its incorporation with metal ions feasible. Via a simple post-treatment, a Pd(II)-containing COF, Pd/COF-LZU1, was accordingly synthesized, which showed excellent catalytic activity in catalyzing the Suzuki-Miyaura coupling reaction. The superior utility of Pd/COF-LZU1 in catalysis was elucidated by the broad scope of the reactants and the excellent yields (96-98%) of the reaction products, together with the high stability and easy recyclability of the catalyst. We expect that our approach will further boost research on designing and employing functional COF materials for catalysis.
TL;DR: In this article, the results of the transesterification of sunflower oil with methanol to produce biodiesel using CaO nanoparticles supported on NaX zeolite as catalyst were reported.
Abstract: Biodiesel is produced by the transesterification of oil triglycerides with methanol or ethanol, in the presence of a homogeneous or heterogeneous catalyst. This study aims to report the results of the transesterification of sunflower oil with methanol to produce biodiesel using CaO nanoparticles supported on NaX zeolite as catalyst. The effect of the CaO nanoparticles concentration on the NaX zeolite surface was studied in the range of 5−25 wt %. The transesterification reaction was carried out at reflux temperature of methanol, atmospheric pressure, a reaction time of 6 h, and with a 6:1 molar ratio of methanol to sunflower oil. Catalyst characterization was carried out by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy. It was concluded that methyl esters content is highly influenced by basicity and that the best catalyst was the one holding 16 wt % CaO nanoparticles. The produced biodiesel was 93.5% methyl esters and was found to fulfill the specifications of Europ...
TL;DR: It is shown that plasmonic nanostructures of silver can concurrently use low-intensity visible light and thermal energy to drive catalytic oxidation reactions--such as ethylene epoxidation, CO oxidation, and NH₃ oxidation--at lower temperatures than their conventional counterparts that use only thermal stimulus.
Abstract: Catalysis plays a critical role in chemical conversion, energy production and pollution mitigation. High activation barriers associated with rate-limiting elementary steps require most commercial heterogeneous catalytic reactions to be run at relatively high temperatures, which compromises energy efficiency and the long-term stability of the catalyst. Here we show that plasmonic nanostructures of silver can concurrently use low-intensity visible light (on the order of solar intensity) and thermal energy to drive catalytic oxidation reactions--such as ethylene epoxidation, CO oxidation, and NH₃ oxidation--at lower temperatures than their conventional counterparts that use only thermal stimulus. Based on kinetic isotope experiments and density functional calculations, we postulate that excited plasmons on the silver surface act to populate O₂ antibonding orbitals and so form a transient negative-ion state, which thereby facilitates the rate-limiting O₂-dissociation reaction. The results could assist the design of catalytic processes that are more energy efficient and robust than current processes.
TL;DR: In this article, two general routes for bio-oil upgrading have been considered: hydrodeoxygenation (HDO) and zeolite cracking, where zeolites, e.g. HZSM-5, are used as catalysts for the deoxygenization reaction.
Abstract: As the oil reserves are depleting the need of an alternative fuel source is becoming increasingly apparent. One prospective method for producing fuels in the future is conversion of biomass into bio-oil and then upgrading the bio-oil over a catalyst, this method is the focus of this review article. Bio-oil production can be facilitated through flash pyrolysis, which has been identified as one of the most feasible routes. The bio-oil has a high oxygen content and therefore low stability over time and a low heating value. Upgrading is desirable to remove the oxygen and in this way make it resemble crude oil. Two general routes for bio-oil upgrading have been considered: hydrodeoxygenation (HDO) and zeolite cracking. HDO is a high pressure operation where hydrogen is used to exclude oxygen from the bio-oil, giving a high grade oil product equivalent to crude oil. Catalysts for the reaction are traditional hydrodesulphurization (HDS) catalysts, such as Co–MoS2/Al2O3, or metal catalysts, as for example Pd/C. However, catalyst lifetimes of much more than 200 h have not been achieved with any current catalyst due to carbon deposition. Zeolite cracking is an alternative path, where zeolites, e.g. HZSM-5, are used as catalysts for the deoxygenation reaction. In these systems hydrogen is not a requirement, so operation is performed at atmospheric pressure. However, extensive carbon deposition results in very short catalyst lifetimes. Furthermore a general restriction in the hydrogen content of the bio-oil results in a low H/C ratio of the oil product as no additional hydrogen is supplied. Overall, oil from zeolite cracking is of a low grade, with heating values approximately 25% lower than that of crude oil. Of the two mentioned routes, HDO appears to have the best potential, as zeolite cracking cannot produce fuels of acceptable grade for the current infrastructure. HDO is evaluated as being a path to fuels in a grade and at a price equivalent to present fossil fuels, but several tasks still have to be addressed within this process. Catalyst development, understanding of the carbon forming mechanisms, understanding of the kinetics, elucidation of sulphur as a source of deactivation, evaluation of the requirement for high pressure, and sustainable sources for hydrogen are all areas which have to be elucidated before commercialisation of the process.
TL;DR: This Review presents an overview of the available homogeneous catalytic routes that use carbon dioxide as a C(1) carbon source for the synthesis of industrial products as well as fine chemicals.
Abstract: A plethora of methods have been developed over the years so that carbon dioxide can be used as a reactant in organic synthesis. Given the abundance of this compound, its utilization in synthetic chemistry, particularly on an industrial scale, is still at a rather low level. In the last 35 years, considerable research has been performed to find catalytic routes to transform CO(2) into carboxylic acids, esters, lactones, and polymers in an economic way. This Review presents an overview of the available homogeneous catalytic routes that use carbon dioxide as a C(1) carbon source for the synthesis of industrial products as well as fine chemicals.
TL;DR: Amorphous molybdenum sulfide films are efficient hydrogen evolution catalysts in water as mentioned in this paper, achieving significant geometric current densities at low overpotentials (e.g., 15 mA cm−2 at η = 200 mV) using these catalysts.
Abstract: Amorphous molybdenum sulfide films are efficient hydrogen evolution catalysts in water. The films are prepared via simple electro-polymerization procedures and are characterized by XPS, electron microscopy and electronic absorption spectroscopy. Whereas the precatalysts could be MoS3 or MoS2, the active form of the catalysts is identified as amorphous MoS2. Significant geometric current densities are achieved at low overpotentials (e.g., 15 mA cm−2 at η = 200 mV) using these catalysts. The catalysis is compatible with a wide range of pHs (e.g., 0 to 13). The current efficiency for hydrogen production is quantitative. A 40 mV Tafel slope is observed, suggesting a rate-determining ion+atom step. The turnover frequency per active site is calculated. The amorphous molybdenum sulfide films are among the most active non-precious hydrogen evolution catalysts.
TL;DR: In this article, Nitrogen-doped graphene as a metal-free catalyst for oxygen reduction was synthesized by heat-treatment of graphene using ammonia and the optimum temperature was 900 °C.
Abstract: Nitrogen-doped graphene as a metal-free catalyst for oxygen reduction was synthesized by heat-treatment of graphene using ammonia. It was found that the optimum temperature was 900 °C. The resulting catalyst had a very high oxygen reduction reaction (ORR) activity through a four-electron transfer process in oxygen-saturated 0.1 M KOH. Most importantly, the electrocatalytic activity and durability of this material are comparable or better than the commercial Pt/C (loading: 4.85 µgPt cm−2). XPS characterization of these catalysts was tested to identify the active N species for ORR.
TL;DR: This work has reported several recently reported Cu-catalyzed C-H oxidation reactions that feature substrates that are electron-deficient or appear unlikely to undergo single-electron transfer to copper(II), and evidence has been obtained for the involvement of organocopper(III) intermediates in the reaction mechanism.
Abstract: The selective oxidation of C-H bonds and the use of O(2) as a stoichiometric oxidant represent two prominent challenges in organic chemistry. Copper(II) is a versatile oxidant, capable of promoting a wide range of oxidative coupling reactions initiated by single-electron transfer (SET) from electron-rich organic molecules. Many of these reactions can be rendered catalytic in Cu by employing molecular oxygen as a stoichiometric oxidant to regenerate the active copper(II) catalyst. Meanwhile, numerous other recently reported Cu-catalyzed C-H oxidation reactions feature substrates that are electron-deficient or appear unlikely to undergo single-electron transfer to copper(II). In some of these cases, evidence has been obtained for the involvement of organocopper(III) intermediates in the reaction mechanism. Organometallic C-H oxidation reactions of this type represent important new opportunities for the field of Cu-catalyzed aerobic oxidations.
TL;DR: This critical review provides insights into the state-of-the-art accomplishments in the chemocatalytic technologies to generate fuels and value-added chemicals from lignocellulosic biomass, with an emphasis on its major component, cellulose.
Abstract: Lignocellulosic biomass is the most abundant and bio-renewable resource with great potential for sustainable production of chemicals and fuels. This critical review provides insights into the state-of the-art accomplishments in the chemocatalytic technologies to generate fuels and value-added chemicals from lignocellulosic biomass, with an emphasis on its major component, cellulose. Catalytic hydrolysis, solvolysis, liquefaction, pyrolysis, gasification, hydrogenolysis and hydrogenation are the major processes presently studied. Regarding catalytic hydrolysis, the acid catalysts cover inorganic or organic acids and various solid acids such as sulfonated carbon, zeolites, heteropolyacids and oxides. Liquefaction and fast pyrolysis of cellulose are primarily conducted over catalysts with proper acidity/basicity. Gasification is typically conducted over supported noble metal catalysts. Reaction conditions, solvents and catalysts are the prime factors that affect the yield and composition of the target products. Most of processes yield a complex mixture, leading to problematic upgrading and separation. An emerging technique is to integrate hydrolysis, liquefaction or pyrolysis with hydrogenation over multifunctional solid catalysts to convert lignocellulosic biomass to value-added fine chemicals and bio-hydrocarbon fuels. And the promising catalysts might be supported transition metal catalysts and zeolite-related materials. There still exist technological barriers that need to be overcome (229 references).
TL;DR: Nickel-Catalyzed Cross-Couplings Involving Carbon-Oxygen Bonds Brad M. Rosen, Kyle W. Quasdorf, Daniella A. Wilson, Na Zhang, Ana-Maria Resmerita, Neil K. Garg, and Virgil Percec report on cross-coupling strategies for high-performance liquid chromatography of carbon dioxide and nitrogen.
Abstract: Nickel-Catalyzed Cross-Couplings Involving Carbon-Oxygen Bonds Brad M. Rosen, Kyle W. Quasdorf, Daniella A. Wilson, Na Zhang, Ana-Maria Resmerita, Neil K. Garg,* and Virgil Percec* Roy & Diana Vagelos Laboratories, Department of Chemistry, University of Pennsylvania, Philadelphia, Pennsylvania 19104-6323, United States Department of Chemistry and Biochemistry, University of California, Los Angeles, California 90095, United States
TL;DR: It is reported that Ag nanoparticles coated with a thin layer of Pd atoms can significantly enhance the production of H₂ from formic acid at ambient temperature.
Abstract: Formic acid (HCOOH) has great potential as an in situ source of hydrogen for fuel cells, because it offers high energy density, is non-toxic and can be safely handled in aqueous solution. So far, there has been a lack of solid catalysts that are sufficiently active and/or selective for hydrogen production from formic acid at room temperature. Here, we report that Ag nanoparticles coated with a thin layer of Pd atoms can significantly enhance the production of H₂ from formic acid at ambient temperature. Atom probe tomography confirmed that the nanoparticles have a core-shell configuration, with the shell containing between 1 and 10 layers of Pd atoms. The Pd shell contains terrace sites and is electronically promoted by the Ag core, leading to significantly enhanced catalytic properties. Our nanocatalysts could be used in the development of micro polymer electrolyte membrane fuel cells for portable devices and could also be applied in the promotion of other catalytic reactions under mild conditions.
TL;DR: A synthetic nickel complex catalyzes the production of H2 using protonated dimethylformamide as the proton source, with turnover frequencies of 33,000 per second in dry acetonitrile and 106,000 s−1 in the presence of 1.2 M of water.
Abstract: Reduction of acids to molecular hydrogen as a means of storing energy is catalyzed by platinum, but its low abundance and high cost are problematic. Precisely controlled delivery of protons is critical in hydrogenase enzymes in nature that catalyze hydrogen (H(2)) production using earth-abundant metals (iron and nickel). Here, we report that a synthetic nickel complex, [Ni(P(Ph)(2)N(Ph))(2)](BF(4))(2), (P(Ph)(2)N(Ph) = 1,3,6-triphenyl-1-aza-3,6-diphosphacycloheptane), catalyzes the production of H(2) using protonated dimethylformamide as the proton source, with turnover frequencies of 33,000 per second (s(-1)) in dry acetonitrile and 106,000 s(-1) in the presence of 1.2 M of water, at a potential of -1.13 volt (versus the ferrocenium/ferrocene couple). The mechanistic implications of these remarkably fast catalysts point to a key role of pendant amines that function as proton relays.
TL;DR: C-C Couplings in Continuous Systems 2308 12.1.
Abstract: 5.4. Miscellaneous Examples 2295 5.4.1. Couplings with Other Catalysts 2295 5.4.2. The Use of Other Boron Reagents 2295 5.4.3. Related Coupling Reactions 2296 5.5. Summary 2297 6. Sonogashira Coupling 2297 6.1. Couplings with Pd Particles 2297 6.2. Studies with Immobilized Palladium Complexes 2299 6.3. Miscellaneous Examples 2301 6.4. Carbonylative Sonogashira Couplings 2302 6.5. Summary 2302 7. Stille Couplings 2302 7.1. Stille Coupling 2302 7.2. Carbonylative Stille Coupling 2304 7.3. Summary 2304 8. Miscellaneous Cross-Coupling Reactions 2304 9. Allylations 2305 9.1. Tsuji-Trost Allylation 2305 9.2. Allylation of Boron Reagents 2306 10. Homocouplings 2307 10.1. Summary 2308 11. C-C Couplings in Continuous Systems 2308 12. Conclusions and Outlook 2311 Author Information 2314 Biography 2314 References 2314
TL;DR: In this article, a mean-field microkinetic model for methanol synthesis and water-gas-shift (WGS) reactions is presented, which includes novel reaction intermediates, such as formic acid (HCOOH) and hydroxymethoxy (CH3O2) and allows for the formation of formic acids, formaldehyde (CH2O), and methyl formate (HCOCH3) as byproducts.
Abstract: We present a comprehensive mean-field microkinetic model for the methanol synthesis and water-gas-shift (WGS) reactions that includes novel reaction intermediates, such as formic acid (HCOOH) and hydroxymethoxy (CH3O2) and allows for the formation of formic acid (HCOOH), formaldehyde (CH2O), and methyl formate (HCOOCH3) as byproducts. All input model parameters were initially derived from periodic, self-consistent, GGA-PW91 density functional theory calculations on the Cu(111) surface and subsequently fitted to published experimental methanol synthesis rate data, which were collected under realistic conditions on a commercial Cu/ZnO/Al2O3 catalyst. We find that the WGS reaction follows the carboxyl (COOH)-mediated path and that both CO and CO2 hydrogenation pathways are active for methanol synthesis. Under typical industrial methanol synthesis conditions, CO2 hydrogenation is responsible for ∼2/3 of the methanol produced. The intermediates of the CO2 pathway for methanol synthesis include HCOO*, HCOOH*, C...
TL;DR: The proposed synthesis route is facile and low-cost, providing a feasible method for the development of highly efficient electrocatalysts, and demonstrated significantly higher catalytic efficiency than a Pt/C catalyst.
Abstract: Based on theoretical prediction, a g-C3N4@carbon metal-free oxygen reduction reaction (ORR) electrocatalyst was designed and synthesized by uniform incorporation of g-C3N4 into a mesoporous carbon to enhance the electron transfer efficiency of g-C3N4. The resulting g-C3N4@carbon composite exhibited competitive catalytic activity (11.3 mA cm–2 kinetic-limiting current density at −0.6 V) and superior methanol tolerance compared to a commercial Pt/C catalyst. Furthermore, it demonstrated significantly higher catalytic efficiency (nearly 100% of four-electron ORR process selectivity) than a Pt/C catalyst. The proposed synthesis route is facile and low-cost, providing a feasible method for the development of highly efficient electrocatalysts.
TL;DR: In this article, the authors summarized the thermodynamic theory of multi-electron transfer reactions and its implications for electrocatalysis and discussed the fundamental differences between catalyzing reactions involving the transfer of one electron or no catalytic intermediates.
TL;DR: Infrared-kinetic measurements indicate that O-O bond scission is activated by the formation of a CO-O2 complex at dual Ti-Au sites at the Au/TiO2 interface, and density functional theory calculations confirm this model.
Abstract: The prevailing view of CO oxidation on gold-titanium oxide (Au/TiO 2 ) catalysts is that the reaction occurs on metal sites at the Au/TiO 2 interface. We observed dual catalytic sites at the perimeter of 3-nanometer Au particles supported on TiO 2 during CO oxidation. Infrared-kinetic measurements indicate that O-O bond scission is activated by the formation of a CO-O 2 complex at dual Ti-Au sites at the Au/TiO 2 interface. Density functional theory calculations, which provide the activation barriers for the formation and bond scission of the CO-O 2 complex, confirm this model as well as the measured apparent activation energy of 0.16 electron volt. The observation of sequential delivery and reaction of CO first from TiO 2 sites and then from Au sites indicates that catalytic activity occurs at the perimeter of Au nanoparticles.
TL;DR: Ultrafine Pd nanoparticles monodispersed on graphene oxide (GO) surfaces were successfully prepared by the redox reaction between PdCl(4)(2-) and GO, allowing it to express high electrocatalytic ability in formic acid and ethanol oxidation relative to a commercial Pd/C catalyst.
Abstract: Ultrafine Pd nanoparticles monodispersed on graphene oxide (GO) surfaces were successfully prepared by the redox reaction between PdCl42− and GO. The as-made catalyst is very “clean” as a result of the surfactant-free formation process, allowing it to express high electrocatalytic ability in formic acid and ethanol oxidation relative to a commercial Pd/C catalyst. This simple and straightforward method is of significance for the facile preparation metal nanocatalysts with high catalytic activity on proper supporting materials.
TL;DR: In this article, the kinetics and mechanism of CO oxidation on single and mixed oxides are examined, alongside the catalyst structures, in a review of the literature on carbon monoxide over oxide catalysts.
Abstract: Oxidation into CO2 is a major solution to CO abatement in air depollution treatments. The development of catalytic converters led to an extraordinary high number of publications on metal catalysts during the last fifty years. Due to the increasing price of noble metals and to remarkable progresses in oxide syntheses, catalytic oxidation of carbon monoxide over oxide catalysts has recently gained in interest, even if some oxides are known to present remarkable activity since the beginning of the 20th century. In this Review, the kinetics and mechanism of CO oxidation on single and mixed oxides are examined, alongside the catalyst structures