Showing papers on "Catalysis published in 2017"

Isolated Single Iron Atoms Anchored on N-Doped Porous Carbon as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

Abstract: The development of low-cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable isolated single-atom Fe/N-doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half-wave potential (E1/2) of 0.900 V, which outperformed commercial Pt/C and most non-precious-metal catalysts reported to date. Besides exceptionally high kinetic current density (Jk) of 37.83 mV cm−2 at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.

Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst.

Abstract: Platinum group metal–free (PGM-free) metal-nitrogen-carbon catalysts have emerged as a promising alternative to their costly platinum (Pt)–based counterparts in polymer electrolyte fuel cells (PEFCs) but still face some major challenges, including (i) the identification of the most relevant catalytic site for the oxygen reduction reaction (ORR) and (ii) demonstration of competitive PEFC performance under automotive-application conditions in the hydrogen (H 2 )–air fuel cell. Herein, we demonstrate H 2 -air performance gains achieved with an iron-nitrogen-carbon catalyst synthesized with two nitrogen precursors that developed hierarchical porosity. Current densities recorded in the kinetic region of cathode operation, at fuel cell voltages greater than ~0.75 V, were the same as those obtained with a Pt cathode at a loading of 0.1 milligram of Pt per centimeter squared. The proposed catalytic active site, carbon-embedded nitrogen-coordinated iron (FeN 4 ), was directly visualized with aberration-corrected scanning transmission electron microscopy, and the contributions of these active sites associated with specific lattice-level carbon structures were explored computationally.

An efficient and pH-universal ruthenium-based catalyst for the hydrogen evolution reaction

Abstract: Ruthenium nanoparticles homogeneously dispersed in a nitrogenated, two-dimensional carbon matrix show high turnover frequency and small overpotential for hydrogen evolution reaction both in acidic and alkaline media. The hydrogen evolution reaction (HER) is a crucial step in electrochemical water splitting and demands an efficient, durable and cheap catalyst if it is to succeed in real applications1,2,3. For an energy-efficient HER, a catalyst must be able to trigger proton reduction with minimal overpotential4 and have fast kinetics5,6,7,8,9. The most efficient catalysts in acidic media are platinum-based, as the strength of the Pt–H bond10 is associated with the fastest reaction rate for the HER11,12. The use of platinum, however, raises issues linked to cost and stability in non-acidic media. Recently, non-precious-metal-based catalysts have been reported, but these are susceptible to acid corrosion and are typically much inferior to Pt-based catalysts, exhibiting higher overpotentials and lower stability13,14,15. As a cheaper alternative to platinum, ruthenium possesses a similar bond strength with hydrogen (∼65 kcal mol–1)16, but has never been studied as a viable alternative for a HER catalyst. Here, we report a Ru-based catalyst for the HER that can operate both in acidic and alkaline media. Our catalyst is made of Ru nanoparticles dispersed within a nitrogenated holey two-dimensional carbon structure (Ru@C2N). The Ru@C2N electrocatalyst exhibits high turnover frequencies at 25 mV (0.67 H2 s−1 in 0.5 M H2SO4 solution; 0.75 H2 s−1 in 1.0 M KOH solution) and small overpotentials at 10 mA cm–2 (13.5 mV in 0.5 M H2SO4 solution; 17.0 mV in 1.0 M KOH solution) as well as superior stability in both acidic and alkaline media. These performances are comparable to, or even better than, the Pt/C catalyst for the HER.

Single Atomic Iron Catalysts for Oxygen Reduction in Acidic Media: Particle Size Control and Thermal Activation.

Abstract: It remains a grand challenge to replace platinum group metal (PGM) catalysts with earth-abundant materials for the oxygen reduction reaction (ORR) in acidic media, which is crucial for large-scale deployment of proton exchange membrane fuel cells (PEMFCs). Here, we report a high-performance atomic Fe catalyst derived from chemically Fe-doped zeolitic imidazolate frameworks (ZIFs) by directly bonding Fe ions to imidazolate ligands within 3D frameworks. Although the ZIF was identified as a promising precursor, the new synthetic chemistry enables the creation of well-dispersed atomic Fe sites embedded into porous carbon without the formation of aggregates. The size of catalyst particles is tunable through synthesizing Fe-doped ZIF nanocrystal precursors in a wide range from 20 to 1000 nm followed by one-step thermal activation. Similar to Pt nanoparticles, the unique size control without altering chemical properties afforded by this approach is able to increase the number of PGM-free active sites. The best O...

Design of N-Coordinated Dual-Metal Sites: A Stable and Active Pt-Free Catalyst for Acidic Oxygen Reduction Reaction

Abstract: We develop a host-guest strategy to construct an electrocatalyst with Fe-Co dual sites embedded on N-doped porous carbon and demonstrate its activity for oxygen reduction reaction in acidic electrolyte. Our catalyst exhibits superior oxygen reduction reaction performance, with comparable onset potential (Eonset, 1.06 vs 1.03 V) and half-wave potential (E1/2, 0.863 vs 0.858 V) than commercial Pt/C. The fuel cell test reveals (Fe,Co)/N-C outperforms most reported Pt-free catalysts in H2/O2 and H2/air. In addition, this cathode catalyst with dual metal sites is stable in a long-term operation with 50 000 cycles for electrode measurement and 100 h for H2/air single cell operation. Density functional theory calculations reveal the dual sites is favored for activation of O-O, crucial for four-electron oxygen reduction.

Ultrathin Iron-Cobalt Oxide Nanosheets with Abundant Oxygen Vacancies for the Oxygen Evolution Reaction.

Abstract: Electrochemical water splitting is a promising method for storing light/electrical energy in the form of H2 fuel; however, it is limited by the sluggish anodic oxygen evolution reaction (OER). To improve the accessibility of H2 production, it is necessary to develop an efficient OER catalyst with large surface area, abundant active sites, and good stability, through a low-cost fabrication route. Herein, a facile solution reduction method using NaBH4 as a reductant is developed to prepare iron-cobalt oxide nanosheets (FexCoy-ONSs) with a large specific surface area (up to 261.1 m2 g−1), ultrathin thickness (1.2 nm), and, importantly, abundant oxygen vacancies. The mass activity of Fe1Co1-ONS measured at an overpotential of 350 mV reaches up to 54.9 A g−1, while its Tafel slope is 36.8 mV dec−1; both of which are superior to those of commercial RuO2, crystalline Fe1Co1-ONP, and most reported OER catalysts. The excellent OER catalytic activity of Fe1Co1-ONS can be attributed to its specific structure, e.g., ultrathin nanosheets that could facilitate mass diffusion/transport of OH− ions and provide more active sites for OER catalysis, and oxygen vacancies that could improve electronic conductivity and facilitate adsorption of H2O onto nearby Co3+ sites.

Active sites for CO2 hydrogenation to methanol on Cu/ZnO catalysts

Abstract: The active sites over commercial copper/zinc oxide/aluminum oxide (Cu/ZnO/Al2O3) catalysts for carbon dioxide (CO2) hydrogenation to methanol, the Zn-Cu bimetallic sites or ZnO-Cu interfacial sites, have recently been the subject of intense debate. We report a direct comparison between the activity of ZnCu and ZnO/Cu model catalysts for methanol synthesis. By combining x-ray photoemission spectroscopy, density functional theory, and kinetic Monte Carlo simulations, we can identify and characterize the reactivity of each catalyst. Both experimental and theoretical results agree that ZnCu undergoes surface oxidation under the reaction conditions so that surface Zn transforms into ZnO and allows ZnCu to reach the activity of ZnO/Cu with the same Zn coverage. Our results highlight a synergy of Cu and ZnO at the interface that facilitates methanol synthesis via formate intermediates.

Ionic Exchange of Metal–Organic Frameworks to Access Single Nickel Sites for Efficient Electroreduction of CO2

Abstract: Single-atom catalysts often exhibit unexpected catalytic activity for many important chemical reactions because of their unique electronic and geometric structures with respect to their bulk counterparts. Herein we adopt metal–organic frameworks (MOFs) to assist the preparation of a catalyst containing single Ni sites for efficient electroreduction of CO2. The synthesis is based on ionic exchange between Zn nodes and adsorbed Ni ions within the cavities of the MOF. This single-atom catalyst exhibited an excellent turnover frequency for electroreduction of CO2 (5273 h–1), with a Faradaic efficiency for CO production of over 71.9% and a current density of 10.48 mA cm–2 at an overpotential of 0.89 V. Our findings present some guidelines for the rational design and accurate modulation of nanostructured catalysts at the atomic scale.

Molecule-Level g-C3N4 Coordinated Transition Metals as a New Class of Electrocatalysts for Oxygen Electrode Reactions

Abstract: Organometallic complexes with metal–nitrogen/carbon (M–N/C) coordination are the most important alternatives to precious metal catalysts for oxygen reduction and evolution reactions (ORR and OER) in energy conversion devices. Here, we designed and developed a range of molecule-level graphitic carbon nitride (g-C3N4) coordinated transition metals (M–C3N4) as a new generation of M–N/C catalysts for these oxygen electrode reactions. As a proof-of-concept example, we conducted theoretical evaluation and experimental validation on a cobalt–C3N4 catalyst with a desired molecular configuration, which possesses comparable electrocatalytic activity to that of precious metal benchmarks for the ORR and OER in alkaline media. The correlation of experimental and computational results confirms that this high activity originates from the precise M–N2 coordination in the g-C3N4 matrix. Moreover, the reversible ORR/OER activity trend for a wide variety of M−C3N4 complexes has been constructed to provide guidance for the m...

Low-temperature hydrogen production from water and methanol using Pt/α-MoC catalysts

Abstract: Polymer electrolyte membrane fuel cells (PEMFCs) running on hydrogen are attractive alternative power supplies for a range of applications, with in situ release of the required hydrogen from a stable liquid offering one way of ensuring its safe storage and transportation before use. The use of methanol is particularly interesting in this regard, because it is inexpensive and can reform itself with water to release hydrogen with a high gravimetric density of 18.8 per cent by weight. But traditional reforming of methanol steam operates at relatively high temperatures (200-350 degrees Celsius), so the focus for vehicle and portable PEMFC applications has been on aqueous-phase reforming of methanol (APRM). This method requires less energy, and the simpler and more compact device design allows direct integration into PEMFC stacks. There remains, however, the need for an efficient APRM catalyst. Here we report that platinum (Pt) atomically dispersed on α-molybdenum carbide (α-MoC) enables low-temperature (150-190 degrees Celsius), base-free hydrogen production through APRM, with an average turnover frequency reaching 18,046 moles of hydrogen per mole of platinum per hour. We attribute this exceptional hydrogen production-which far exceeds that of previously reported low-temperature APRM catalysts-to the outstanding ability of α-MoC to induce water dissociation, and to the fact that platinum and α-MoC act in synergy to activate methanol and then to reform it.

Energy-Related Small Molecule Activation Reactions: Oxygen Reduction and Hydrogen and Oxygen Evolution Reactions Catalyzed by Porphyrin- and Corrole-Based Systems

Abstract: Globally increasing energy demands and environmental concerns related to the use of fossil fuels have stimulated extensive research to identify new energy systems and economies that are sustainable, clean, low cost, and environmentally benign. Hydrogen generation from solar-driven water splitting is a promising strategy to store solar energy in chemical bonds. The subsequent combustion of hydrogen in fuel cells produces electric energy, and the only exhaust is water. These two reactions compose an ideal process to provide clean and sustainable energy. In such a process, a hydrogen evolution reaction (HER), an oxygen evolution reaction (OER) during water splitting, and an oxygen reduction reaction (ORR) as a fuel cell cathodic reaction are key steps that affect the efficiency of the overall energy conversion. Catalysts play key roles in this process by improving the kinetics of these reactions. Porphyrin-based and corrole-based systems are versatile and can efficiently catalyze the ORR, OER, and HER. Becau...

Fe-Doped CoP Nanoarray: A Monolithic Multifunctional Catalyst for Highly Efficient Hydrogen Generation

Abstract: An Fe-doped CoP nanoarray behaves as a robust 3D monolithic multifunctional catalyst for electrolytic and hydrolytic hydrogen evolution with high activity Its two-electrode electrolyzer needs a cell voltage of only 160 V for 10 mA cm-2 water-splitting current It also catalyzes effectively NaBH4 hydrolysis with a low activation energy of ≈396 kJ mol-1 and a hydrogen generation rate of 606 L min-1 g-1

Nickel-Based Electrocatalysts for Energy-Related Applications: Oxygen Reduction, Oxygen Evolution, and Hydrogen Evolution Reactions

Abstract: The persistently increasing energy consumption and the low abundance of conventional fuels have raised serious concerns all over the world. Thus, the development of technology for clean-energy production has become the major research priority worldwide. The globalization of advanced energy conversion technologies like rechargeable metal–air batteries, regenerated fuel cells, and water-splitting devices has been majorly benefitted by the development of apposite catalytic materials that can proficiently carry out the pertinent electrochemical processes like oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and water hydrolysis. Despite a handful of superbly performing commercial catalysts, the high cost and low electrochemical stability of precursors have consistently discouraged their long-term viability. As a promising substitute of conventional platinum-, palladium-, iridium-, gold-, silver-, and ruthenium-based catalysts, various transition-metal (TM) i...

2D MXenes: A New Family of Promising Catalysts for the Hydrogen Evolution Reaction

Abstract: Developing highly conductive, stable, and active nonprecious hydrogen evolution reaction (HER) catalysts is a key step for the proposed hydrogen economy. However, few catalysts, except for noble metals, meet all the requirements. By using state-of-the-art density functional calculations, herein we demonstrate that 2D MXenes, like Ti2C, V2C, and Ti3C2, are terminated by a mixture of oxygen atoms and hydroxyl, while Nb2C and Nb4C3O2 are fully terminated by oxygen atoms under standard conditions [pH 0, p(H2) = 1 bar, U = 0 V vs standard hydrogen electrode], findings in good agreement with experimental observation. Furthermore, all these MXenes are conductive under standard conditions, thus allowing high charge transfer kinetics during the HER. Remarkably, the Gibbs free energy for the adsorption of atomic hydrogen (ΔGH*0) on the terminated O atoms (e.g., Ti2CO2) is close to the ideal value (0 eV). Our results demonstrate terminated oxygens as catalytic active sites for the HER at these materials and highligh...

Multifunctional Carbon-Based Metal-Free Electrocatalysts for Simultaneous Oxygen Reduction, Oxygen Evolution, and Hydrogen Evolution.

Abstract: Rationally designed N, S co-doped graphitic sheets with stereoscopic holes (SHG) act as effective tri-functional catalysts for the oxygen reduction reaction, hydrogen evolution reaction, and oxygen evolution reaction, simultaneously. The multifunctional electrocatalytic activities originate from a synergistic effect of the N, S heteroatom doping and unique SHG architecture, which provide a large surface area and efficient pathways for electron and electrolyte/reactant transports.

Directly converting CO 2 into a gasoline fuel

Abstract: The direct production of liquid fuels from CO2 hydrogenation has attracted enormous interest for its significant roles in mitigating CO2 emissions and reducing dependence on petrochemicals. Here we report a highly efficient, stable and multifunctional Na-Fe3O4/HZSM-5 catalyst, which can directly convert CO2 to gasoline-range (C5-C11) hydrocarbons with selectivity up to 78% of all hydrocarbons while only 4% methane at a CO2 conversion of 22% under industrial relevant conditions. It is achieved by a multifunctional catalyst providing three types of active sites (Fe3O4, Fe5C2 and acid sites), which cooperatively catalyse a tandem reaction. More significantly, the appropriate proximity of three types of active sites plays a crucial role in the successive and synergetic catalytic conversion of CO2 to gasoline. The multifunctional catalyst, exhibiting a remarkable stability for 1,000 h on stream, definitely has the potential to be a promising industrial catalyst for CO2 utilization to liquid fuels.

Atomic Modulation of FeCo–Nitrogen–Carbon Bifunctional Oxygen Electrodes for Rechargeable and Flexible All-Solid-State Zinc–Air Battery

Abstract: Rational design and exploration of robust and low-cost bifunctional oxygen reduction/evolution electrocatalysts are greatly desired for metal–air batteries. Herein, a novel high-performance oxygen electrode catalyst is developed based on bimetal FeCo nanoparticles encapsulated in in situ grown nitrogen-doped graphitic carbon nanotubes with bamboo-like structure. The obtained catalyst exhibits a positive half-wave potential of 0.92 V (vs the reversible hydrogen electrode, RHE) for oxygen reduction reaction, and a low operating potential of 1.73 V to achieve a 10 mA cm−2 current density for oxygen evolution reaction. The reversible oxygen electrode index is 0.81 V, surpassing that of most highly active bifunctional catalysts reported to date. By combining experimental and simulation studies, a strong synergetic coupling between FeCo alloy and N-doped carbon nanotubes is proposed in producing a favorable local coordination environment and electronic structure, which affords the pyridinic N-rich catalyst surface promoting the reversible oxygen reactions. Impressively, the assembled zinc–air batteries using liquid electrolytes and the all-solid-state batteries with the synthesized bifunctional catalyst as the air electrode demonstrate superior charging–discharging performance, long lifetime, and high flexibility, holding great potential in practical implementation of new-generation powerful rechargeable batteries with portable or even wearable characteristic.

Direct conversion of CO2 into liquid fuels with high selectivity over a bifunctional catalyst.

Abstract: Although considerable progress has been made in carbon dioxide (CO2) hydrogenation to various C1 chemicals, it is still a great challenge to synthesize value-added products with two or more carbons, such as gasoline, directly from CO2 because of the extreme inertness of CO2 and a high C-C coupling barrier. Here we present a bifunctional catalyst composed of reducible indium oxides (In2O3) and zeolites that yields a high selectivity to gasoline-range hydrocarbons (78.6%) with a very low methane selectivity (1%). The oxygen vacancies on the In2O3 surfaces activate CO2 and hydrogen to form methanol, and C-C coupling subsequently occurs inside zeolite pores to produce gasoline-range hydrocarbons with a high octane number. The proximity of these two components plays a crucial role in suppressing the undesired reverse water gas shift reaction and giving a high selectivity for gasoline-range hydrocarbons. Moreover, the pellet catalyst exhibits a much better performance during an industry-relevant test, which suggests promising prospects for industrial applications.

Discriminating Catalytically Active FeNx Species of Atomically Dispersed Fe–N–C Catalyst for Selective Oxidation of the C–H Bond

Abstract: Nanostructured Fe–N–C materials represent a new type of “platinum-like” non-noble-metal catalyst for various electrochemical reactions and organic transformations. However, no consensus has been reached on the active sites of the Fe–N–C catalysts because of their heterogeneity in particle size and composition. In this contribution, we have successfully prepared atomically dispersed Fe–N–C catalyst, which exhibited high activity and excellent reusability for the selective oxidation of the C–H bond. A wide scope of substrates, including aromatic, heterocyclic, and aliphatic alkanes, were smoothly oxidized at room temperature, and the selectivity of corresponding products reached as high as 99%. By using sub-angstrom-resolution HAADF-STEM in combination with XPS, XAS, ESR, and Mossbauer spectroscopy, we have provided solid evidence that Fe is exclusively dispersed as single atoms via forming FeNx (x = 4–6) and that the relative concentration of each FeNx species is critically dependent on the pyrolysis tempe...

MoS2 monolayer catalyst doped with isolated Co atoms for the hydrodeoxygenation reaction

Abstract: The conversion of oxygen-rich biomass into hydrocarbon fuels requires efficient hydrodeoxygenation catalysts during the upgrading process. However, traditionally prepared CoMoS2 catalysts, although efficient for hydrodesulfurization, are not appropriate due to their poor activity, sulfur loss and rapid deactivation at elevated temperature. Here, we report the synthesis of MoS2 monolayer sheets decorated with isolated Co atoms that bond covalently to sulfur vacancies on the basal planes that, when compared with conventionally prepared samples, exhibit superior activity, selectivity and stability for the hydrodeoxygenation of 4-methylphenol to toluene. This higher activity allows the reaction temperature to be reduced from the typically used 300 °C to 180 °C and thus allows the catalysis to proceed without sulfur loss and deactivation. Experimental analysis and density functional theory calculations reveal a large number of sites at the interface between the Co and Mo atoms on the MoS2 basal surface and we ascribe the higher activity to the presence of sulfur vacancies that are created local to the observed Co–S–Mo interfacial sites. Converting oxygen-rich biomass into fuels requires the removal of oxygen groups through hydrodeoxygenation. MoS2 monolayer sheets decorated with isolated Co atoms bound to sulfur vacancies in the basal plane have now been synthesized that exhibit superior catalytic activity, selectivity and stability for the hydrodeoxygenation of 4-methylphenol to toluene when compared to conventionally prepared materials.

Ruthenium-cobalt nanoalloys encapsulated in nitrogen-doped graphene as active electrocatalysts for producing hydrogen in alkaline media.

Abstract: The scalable production of hydrogen could conveniently be realized by alkaline water electrolysis. Currently, the major challenge confronting hydrogen evolution reaction (HER) is lacking inexpensive alternatives to platinum-based electrocatalysts. Here we report a high-efficient and stable electrocatalyst composed of ruthenium and cobalt bimetallic nanoalloy encapsulated in nitrogen-doped graphene layers. The catalysts display remarkable performance with low overpotentials of only 28 and 218 mV at 10 and 100 mA cm−2, respectively, and excellent stability of 10,000 cycles. Ruthenium is the cheapest platinum-group metal and its amount in the catalyst is only 3.58 wt.%, showing the catalyst high activity at a very competitive price. Density functional theory calculations reveal that the introduction of ruthenium atoms into cobalt core can improve the efficiency of electron transfer from alloy core to graphene shell, beneficial for enhancing carbon–hydrogen bond, thereby lowing ΔGH* of HER. Ruthenium is the cheapest platinum-group metal, yet active hydrogen evolution catalysts with low amounts of ruthenium have yet to be designed. Here, the authors report the preparation of a ruthenium–cobalt nanoalloy and demonstrate its potential as an effective hydrogen evolution catalyst in basic media.

Ternary NiCo 2 P x Nanowires as pH-Universal Electrocatalysts for Highly Efficient Hydrogen Evolution Reaction.

Abstract: A bimetallic-structured ternary phosphide (NiCo2 Px ) as a novel pH-universal electrocatalyst for hydrogen evolution reaction is presented. It exhibits both high activity and long-term stability in all the tested alkaline, neutral, and acidic media. The excellent catalytic performance endows it with a bright future in the large-scale electrochemical water splitting industry.

In Situ Exfoliated, Edge-Rich, Oxygen-Functionalized Graphene from Carbon Fibers for Oxygen Electrocatalysis.

Abstract: Metal-free electrocatalysts have been extensively developed to replace noble metal Pt and RuO2 catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in fuel cells or metal-air batteries. These electrocatalysts are usually deposited on a 3D conductive support (e.g., carbon paper or carbon cloth (CC)) to facilitate mass and electron transport. For practical applications, it is desirable to create in situ catalysts on the carbon fiber support to simplify the fabrication process for catalytic electrodes. In this study, the first example of in situ exfoliated, edge-rich, oxygen-functionalized graphene on the surface of carbon fibers using Ar plasma treatment is successfully prepared. Compared to pristine CC, the plasma-etched carbon cloth (P-CC) has a higher specific surface area and an increased number of active sites for OER and ORR. P-CC also displays good intrinsic electron conductivity and excellent mass transport. Theoretical studies show that P-CC has a low overpotential that is comparable to Pt-based catalysts, as a result of both defects and oxygen doping. This study provides a simple and effective approach for producing highly active in situ catalysts on a carbon support for OER and ORR.

Highly selective and active CO 2 reduction electrocatalysts based on cobalt phthalocyanine/carbon nanotube hybrid structures

Abstract: Electrochemical reduction of carbon dioxide with renewable energy is a sustainable way of producing carbon-neutral fuels. However, developing active, selective and stable electrocatalysts is challenging and entails material structure design and tailoring across a range of length scales. Here we report a cobalt-phthalocyanine-based high-performance carbon dioxide reduction electrocatalyst material developed with a combined nanoscale and molecular approach. On the nanoscale, cobalt phthalocyanine (CoPc) molecules are uniformly anchored on carbon nanotubes to afford substantially increased current density, improved selectivity for carbon monoxide, and enhanced durability. On the molecular level, the catalytic performance is further enhanced by introducing cyano groups to the CoPc molecule. The resulting hybrid catalyst exhibits >95% Faradaic efficiency for carbon monoxide production in a wide potential range and extraordinary catalytic activity with a current density of 15.0 mA cm−2 and a turnover frequency of 4.1 s−1 at the overpotential of 0.52 V in a near-neutral aqueous solution. Electrochemical reduction of carbon dioxide is a sustainable way of producing carbon-neutral fuels. Here, the authors take a combined nanoscale and molecular approach to develop a highly active and selective cobalt phthalocyanine/carbon nanotube hybrid electrocatalyst for carbon dioxide reduction to carbon monoxide.

A highly selective and stable ZnO-ZrO 2 solid solution catalyst for CO 2 hydrogenation to methanol.

Abstract: Although methanol synthesis via CO hydrogenation has been industrialized, CO2 hydrogenation to methanol still confronts great obstacles of low methanol selectivity and poor stability, particularly for supported metal catalysts under industrial conditions. We report a binary metal oxide, ZnO-ZrO2 solid solution catalyst, which can achieve methanol selectivity of up to 86 to 91% with CO2 single-pass conversion of more than 10% under reaction conditions of 5.0 MPa, 24,000 ml/(g hour), H2/CO2 = 3:1 to 4:1, 320° to 315°C. Experimental and theoretical results indicate that the synergetic effect between Zn and Zr sites results in the excellent performance. The ZnO-ZrO2 solid solution catalyst shows high stability for at least 500 hours on stream and is also resistant to sintering at higher temperatures. Moreover, no deactivation is observed in the presence of 50 ppm SO2 or H2S in the reaction stream.

RuP2 -Based Catalysts with Platinum-like Activity and Higher Durability for the Hydrogen Evolution Reaction at All pH Values.

Abstract: Highly active, stable and cheap Pt-free catalysts toward hydrogen evolution reaction (HER) are under increasing demand for future energy conversion systems. However, developing pH-universal HER electrocatalysts with Pt-like activity that can function at all pH values still remains as a great challenge. Herein, based on our theoretical predictions, we first design and synthesize a novel N,P dual-doped carbon-encapsulated ruthenium diphosphide (RuP2@NPC) nanoparticle electrocatalyst for HER. Electrochemical tests reveal that, compared with the Pt/C catalyst, RuP2@NPC not only possesses Pt-like HER activity with small overpotentials at 10 mA cm-2 (38 mV in 0.5 M H2SO4, 57 mV in 1.0 M PBS and 52 mV in 1.0 M KOH), but demonstrates superior stability at all pH values, as well as 100 % Faradaic yields. Therefore, this work represents an important addition to the growing family of transition metal phosphides/heteroatom-doped carbon heterostructures with advanced performance in HER and beyond.

Electroreduction of carbon dioxide to hydrocarbons using bimetallic Cu-Pd catalysts with different mixing patterns

Abstract: Electrochemical conversion of CO2 holds promise for utilization of CO2 as a carbon feedstock and for storage of intermittent renewable energy. Presently Cu is the only metallic electrocatalyst known to reduce CO2 to appreciable amounts of hydrocarbons, but often a wide range of products such as CO, HCOO–, and H2 are formed as well. Better catalysts that exhibit high activity and especially high selectivity for specific products are needed. Here a range of bimetallic Cu–Pd catalysts with ordered, disordered, and phase-separated atomic arrangements (Cuat:Pdat = 1:1), as well as two additional disordered arrangements (Cu3Pd and CuPd3 with Cuat:Pdat = 3:1 and 1:3), are studied to determine key factors needed to achieve high selectivity for C1 or C2 chemicals in CO2 reduction. When compared with the disordered and phase-separated CuPd catalysts, the ordered CuPd catalyst exhibits the highest selectivity for C1 products (>80%). The phase-separated CuPd and Cu3Pd achieve higher selectivity (>60%) for C2 chemical...

Selective increase in CO2 electroreduction activity at grain-boundary surface terminations

Abstract: Altering a material’s catalytic properties requires identifying structural features that give rise to active surfaces. Grain boundaries create strained regions in polycrystalline materials by stabilizing dislocations and may provide a way to create high-energy surfaces for catalysis that are kinetically trapped. Although grain-boundary density has previously been correlated with catalytic activity for some reactions, direct evidence that grain boundaries create surfaces with enhanced activity is lacking. We used a combination of bulk electrochemical measurements and scanning electrochemical cell microscopy with submicrometer resolution to show that grain-boundary surface terminations in gold electrodes are more active than grain surfaces for electrochemical carbon dioxide (CO 2 ) reduction to carbon monoxide (CO) but not for the competing hydrogen (H 2 ) evolution reaction. The catalytic footprint of the grain boundary is commensurate with its dislocation-induced strain field, providing a strategy for broader exploitation of grain-boundary effects in heterogeneous catalysis.