Showing papers on "Catalysis published in 2019"

Chemical and structural origin of lattice oxygen oxidation in Co–Zn oxyhydroxide oxygen evolution electrocatalysts

Abstract: The oxygen evolution reaction (OER) is a key process in electrochemical energy conversion devices. Understanding the origins of the lattice oxygen oxidation mechanism is crucial because OER catalysts operating via this mechanism could bypass certain limitations associated with those operating by the conventional adsorbate evolution mechanism. Transition metal oxyhydroxides are often considered to be the real catalytic species in a variety of OER catalysts and their low-dimensional layered structures readily allow direct formation of the O–O bond. Here, we incorporate catalytically inactive Zn2+ into CoOOH and suggest that the OER mechanism is dependent on the amount of Zn2+ in the catalyst. The inclusion of the Zn2+ ions gives rise to oxygen non-bonding states with different local configurations that depend on the quantity of Zn2+. We propose that the OER proceeds via the lattice oxygen oxidation mechanism pathway on the metal oxyhydroxides only if two neighbouring oxidized oxygens can hybridize their oxygen holes without sacrificing metal–oxygen hybridization significantly, finding that Zn0.2Co0.8OOH has the optimum activity. Oxygen evolution is one half of the overall water splitting reaction to produce hydrogen. Although this reaction is well studied, there remains debate over the particulars of the catalytic mechanism. Here, the authors investigate Co–Zn oxyhydroxide electrocatalysts, and suggest that the mechanism depends on the amount of Zn2+ they contain.

PdMo bimetallene for oxygen reduction catalysis

Abstract: The efficient interconversion of chemicals and electricity through electrocatalytic processes is central to many renewable-energy initiatives. The sluggish kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER)1-4 has long posed one of the biggest challenges in this field, and electrocatalysts based on expensive platinum-group metals are often required to improve the activity and durability of these reactions. The use of alloying5-7, surface strain8-11 and optimized coordination environments12 has resulted in platinum-based nanocrystals that enable very high ORR activities in acidic media; however, improving the activity of this reaction in alkaline environments remains challenging because of the difficulty in achieving optimized oxygen binding strength on platinum-group metals in the presence of hydroxide. Here we show that PdMo bimetallene-a palladium-molybdenum alloy in the form of a highly curved and sub-nanometre-thick metal nanosheet-is an efficient and stable electrocatalyst for the ORR and the OER in alkaline electrolytes, and shows promising performance as a cathode in Zn-air and Li-air batteries. The thin-sheet structure of PdMo bimetallene enables a large electrochemically active surface area (138.7 square metres per gram of palladium) as well as high atomic utilization, resulting in a mass activity towards the ORR of 16.37 amperes per milligram of palladium at 0.9 volts versus the reversible hydrogen electrode in alkaline electrolytes. This mass activity is 78 times and 327 times higher than those of commercial Pt/C and Pd/C catalysts, respectively, and shows little decay after 30,000 potential cycles. Density functional theory calculations reveal that the alloying effect, the strain effect due to the curved geometry, and the quantum size effect due to the thinness of the sheets tune the electronic structure of the system for optimized oxygen binding. Given the properties and the structure-activity relationships of PdMo metallene, we suggest that other metallene materials could show great promise in energy electrocatalysis.

Persulfate Activation on Crystallographic Manganese Oxides: Mechanism of Singlet Oxygen Evolution for Nonradical Selective Degradation of Aqueous Contaminants.

Abstract: Minerals and transitional metal oxides of earth-abundant elements are desirable catalysts for in situ chemical oxidation in environmental remediation. However, catalytic activation of peroxydisulfate (PDS) by manganese oxides was barely investigated. In this study, one-dimension manganese dioxides (α- and β-MnO2) were discovered as effective PDS activators among the diverse manganese oxides for selective degradation of organic contaminants. Compared with other chemical states and crystallographic structures of manganese oxide, β-MnO2 nanorods exhibited the highest phenol degradation rate (0.044 min-1, 180 min) by activating PDS. A comprehensive study was conducted utilizing electron paramagnetic resonance, chemical probes, radical scavengers, and different solvents to identity the reactive oxygen species (ROS). Singlet oxygen (1O2) was unveiled to be the primary ROS, which was generated by direct oxidation or recombination of superoxide ions and radicals from a metastable manganese intermediate at neutral pH. The study dedicates to the first mechanistic study into PDS activation over manganese oxides and provides a novel catalytic system for selective removal of organic contaminants in wastewater.

Rational catalyst and electrolyte design for CO2 electroreduction towards multicarbon products

Abstract: The CO2 electroreduction reaction (CO2RR) to fuels and feedstocks is an attractive route to close the anthropogenic carbon cycle and store renewable energy. The generation of more reduced chemicals, especially multicarbon oxygenate and hydrocarbon products (C2+) with higher energy densities, is highly desirable for industrial applications. However, selective conversion of CO2 to C2+ suffers from a high overpotential, a low reaction rate and low selectivity, and the process is extremely sensitive to the catalyst structure and electrolyte. Here we discuss strategies to achieve high C2+ selectivity through rational design of the catalyst and electrolyte. Current state-of-the-art catalysts, including Cu and Cu–bimetallic catalysts, as well as some alternative materials, are considered. The importance of taking into consideration the dynamic evolution of the catalyst structure and composition are highlighted, focusing on findings extracted from in situ and operando characterizations. Additional theoretical insight into the reaction mechanisms underlying the improved C2+ selectivity of specific catalyst geometries and compositions in synergy with a well-chosen electrolyte are also provided. The electrochemical reduction of carbon dioxide to fuels and feedstocks has received increased attention over the past few years. In this Review, Roldan Cuenya and co-workers discuss strategies to achieve high selectivity towards multicarbon products via rational catalyst and electrolyte design.

Tuning Oxygen Vacancies in Ultrathin TiO2 Nanosheets to Boost Photocatalytic Nitrogen Fixation up to 700 nm

Abstract: Dinitrogen reduction to ammonia using transition metal catalysts is central to both the chemical industry and the Earth's nitrogen cycle. In the Haber-Bosch process, a metallic iron catalyst and high temperatures (400 °C) and pressures (200 atm) are necessary to activate and cleave NN bonds, motivating the search for alternative catalysts that can transform N2 to NH3 under far milder reaction conditions. Here, the successful hydrothermal synthesis of ultrathin TiO2 nanosheets with an abundance of oxygen vacancies and intrinsic compressive strain, achieved through a facile copper-doping strategy, is reported. These defect-rich ultrathin anatase nanosheets exhibit remarkable and stable performance for photocatalytic reduction of N2 to NH3 in water, exhibiting photoactivity up to 700 nm. The oxygen vacancies and strain effect allow strong chemisorption and activation of molecular N2 and water, resulting in unusually high rates of NH3 evolution under visible-light irradiation. Therefore, this study offers a promising and sustainable route for the fixation of atmospheric N2 using solar energy.

Atomically dispersed platinum supported on curved carbon supports for efficient electrocatalytic hydrogen evolution

Abstract: Dispersing catalytically active metals as single atoms on supports represents the ultimate in metal utilization efficiency and is increasingly being used as a strategy to design hydrogen evolution reaction (HER) electrocatalysts. Although platinum (Pt) is highly active for HER, given its high cost it is desirable to find ways to improve performance further while minimizing the Pt loading. Here, we use onion-like nanospheres of carbon (OLC) to anchor stable atomically dispersed Pt to act as a catalyst (Pt1/OLC) for the HER. In acidic media, the performance of the Pt1/OLC catalyst (0.27 wt% Pt) in terms of a low overpotential (38 mV at 10 mA cm−2) and high turnover frequencies (40.78 H2 s−1 at 100 mV) is better than that of a graphene-supported single-atom catalyst with a similar Pt loading, and comparable to a commercial Pt/C catalyst with 20 wt% Pt. First-principle calculations suggest that a tip-enhanced local electric field at the Pt site on the curved support promotes the reaction kinetics for hydrogen evolution. Isolating metal atoms on supports is becoming an increasingly studied approach to design water splitting electrocatalysts. Here, the authors prepare a hydrogen evolution catalyst comprising atomically dispersed Pt atoms on curved carbon supports, which outperform similar catalysts where the support is flat.

New horizon in C1 chemistry: breaking the selectivity limitation in transformation of syngas and hydrogenation of CO2 into hydrocarbon chemicals and fuels

Abstract: Catalytic transformations of syngas (a mixture of H2 and CO), which is one of the most important C1-chemistry platforms, and CO2, a greenhouse gas released from human industrial activities but also a candidate of abundant carbon feedstock, into chemicals and fuels have attracted much attention in recent years. Fischer-Tropsch (FT) synthesis is a classic route of syngas chemistry, but the product selectivity of FT synthesis is limited by the Anderson-Schulz-Flory (ASF) distribution. The hydrogenation of CO2 into C2+ hydrocarbons involving C-C bond formation encounters similar selectivity limitation. The present article focuses on recent advances in breaking the selectivity limitation by using a reaction coupling strategy for hydrogenation of both CO and CO2 into C2+ hydrocarbons, which include key building-block chemicals, such as lower (C2-C4) olefins and aromatics, and liquid fuels, such as gasoline (C5-C11 hydrocarbons), jet fuel (C8-C16 hydrocarbons) and diesel fuel (C10-C20 hydrocarbons). The design and development of novel bifunctional or multifunctional catalysts, which are composed of metal, metal carbide or metal oxide nanoparticles and zeolites, for hydrogenation of CO and CO2 to C2+ hydrocarbons beyond FT synthesis will be reviewed. The key factors in controlling catalytic performances, such as the catalyst component, the acidity and mesoporosity of the zeolite and the proximity between the metal/metal carbide/metal oxide and zeolite, will be analysed to provide insights for designing efficient bifunctional or multifunctional catalysts. The reaction mechanism, in particular the activation of CO and CO2, the reaction pathway and the reaction intermediate, will be discussed to provide a deep understanding of the chemistry of the new C1 chemistry routes beyond FT synthesis.

Highly active atomically dispersed CoN 4 fuel cell cathode catalysts derived from surfactant-assisted MOFs: carbon-shell confinement strategy

Abstract: Development of platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) is essential for affordable proton exchange membrane fuel cells. Herein, a new type of atomically dispersed Co doped carbon catalyst with a core–shell structure has been developed via a surfactant-assisted metal–organic framework approach. The cohesive interactions between the selected surfactant and the Co-doped zeolitic imidazolate framework (ZIF-8) nanocrystals lead to a unique confinement effect. During the thermal activation, this confinement effect suppressed the agglomeration of Co atomic sites and mitigated the collapse of internal microporous structures of ZIF-8. Among the studied surfactants, Pluronic F127 block copolymer led to the greatest performance gains with a doubling of the active site density relative to that of the surfactant-free catalyst. According to density functional theory calculations, unlike other Co catalysts, this new atomically dispersed Co–N–C@F127 catalyst is believed to contain substantial CoN2+2 sites, which are active and thermodynamically favorable for the four-electron ORR pathway. The Co–N–C@F127 catalyst exhibits an unprecedented ORR activity with a half-wave potential (E1/2) of 0.84 V (vs. RHE) as well as enhanced stability in the corrosive acidic media. It also demonstrated high initial performance with a power density of 0.87 W cm−2 along with encouraging durability in H2–O2 fuel cells. The atomically dispersed Co site catalyst approaches that of the Fe–N–C catalyst and represents the highest reported PGM-free and Fe-free catalyst performance.

Engineering the electronic structure of single atom Ru sites via compressive strain boosts acidic water oxidation electrocatalysis

Abstract: Single-atom precious metal catalysts hold the promise of perfect atom utilization, yet control of their activity and stability remains challenging. Here we show that engineering the electronic structure of atomically dispersed Ru1 on metal supports via compressive strain boosts the kinetically sluggish electrocatalytic oxygen evolution reaction (OER), and mitigates the degradation of Ru-based electrocatalysts in an acidic electrolyte. We construct a series of alloy-supported Ru1 using different PtCu alloys through sequential acid etching and electrochemical leaching, and find a volcano relation between OER activity and the lattice constant of the PtCu alloys. Our best catalyst, Ru1–Pt3Cu, delivers 90 mV lower overpotential to reach a current density of 10 mA cm−2, and an order of magnitude longer lifetime over that of commercial RuO2. Density functional theory investigations reveal that the compressive strain of the Ptskin shell engineers the electronic structure of the Ru1, allowing optimized binding of oxygen species and better resistance to over-oxidation and dissolution. While Ru-based electrocatalysts are among the most active for acidic water oxidation, they suffer from severe deactivation. Now, Yuen Wu, Wei-Xue Li and co-workers report a core–shell Ru1–Pt3Cu catalyst with surface-dispersed Ru atoms for a highly active and stable oxygen evolution reaction in acid electrolyte.

Recommended Practices and Benchmark Activity for Hydrogen and Oxygen Electrocatalysis in Water Splitting and Fuel Cells.

Abstract: Electrochemical energy storage by making H2 an energy carrier from water splitting relies on four elementary reactions, i.e., the hydrogen evolution reaction (HER), hydrogen oxidation reaction (HOR), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Herein, the central objective is to recommend systematic protocols for activity measurements of these four reactions and benchmark activities for comparison, which is critical to facilitate the research and development of catalysts with high activity and stability. Details for the electrochemical cell setup, measurements, and data analysis used to quantify the kinetics of the HER, HOR, OER, and ORR in acidic and basic solutions are provided, and examples of state-of-the-art specific and mass activity of catalysts to date are given. First, the experimental setup is discussed to provide common guidelines for these reactions, including the cell design, reference electrode selection, counter electrode concerns, and working electrode preparation. Second, experimental protocols, including data collection and processing such as ohmic- and background-correction and catalyst surface area estimation, and practice for testing and comparing different classes of catalysts are recommended. Lastly, the specific and mass activity activities of some state-of-the-art catalysts are benchmarked to facilitate the comparison of catalyst activity for these four reactions across different laboratories.

Tuning the Coordination Environment in Single-Atom Catalysts to Achieve Highly Efficient Oxygen Reduction Reactions.

Abstract: Designing atomically dispersed metal catalysts for oxygen reduction reaction (ORR) is a promising approach to achieve efficient energy conversion. Herein, we develop a template-assisted method to synthesize a series of single metal atoms anchored on porous N,S-codoped carbon (NSC) matrix as highly efficient ORR catalysts to investigate the correlation between the structure and their catalytic performance. The structure analysis indicates that an identical synthesis method results in distinguished structural differences between Fe-centered single-atom catalyst (Fe-SAs/NSC) and Co-centered/Ni-centered single-atom catalysts (Co-SAs/NSC and Ni-SAs/NSC) because of the different trends of each metal ion in forming a complex with the N,S-containing precursor during the initial synthesis process. The Fe-SAs/NSC mainly consists of a well-dispersed FeN4S2 center site where S atoms form bonds with the N atoms. The S atoms in Co-SAs/NSC and Ni-SAs/NSC, on the other hand, form metal-S bonds, resulting in CoN3S1 and NiN3S1 center sites. Density functional theory (DFT) reveals that the FeN4S2 center site is more active than the CoN3S1 and NiN3S1 sites, due to the higher charge density, lower energy barriers of the intermediates, and products involved. The experimental results indicate that all three single-atom catalysts could contribute high ORR electrochemical performances, while Fe-SAs/NSC exhibits the highest of all, which is even better than commercial Pt/C. Furthermore, Fe-SAs/NSC also displays high methanol tolerance as compared to commercial Pt/C and high stability up to 5000 cycles. This work provides insights into the rational design of the definitive structure of single-atom catalysts with tunable electrocatalytic activities for efficient energy conversion.

Promoting nitrogen electroreduction to ammonia with bismuth nanocrystals and potassium cations in water

Abstract: The electrochemical nitrogen reduction reaction (ENRR) can allow the production of ammonia from nitrogen and water under ambient conditions and is regarded as a sustainable alternative to the industrial Haber–Bosch process. However, electrocatalytic systems that selectively and efficiently catalyse nitrogen reduction remain elusive due to the strong competition with the hydrogen evolution reaction. Here, we report a strategy to simultaneously promote ENRR selectivity and activity using bismuth nanocrystals and potassium cations. Bismuth exhibits higher intrinsic ENRR activity than transition metals due to the strong interaction between the Bi 6p band and the N 2p orbitals. Potassium cations stabilize key nitrogen-reduction intermediates and regulate proton transfer to increase the selectivity. A high Faradaic efficiency of 66% and ammonia yield of 200 mmol g–1 h–1 (0.052 mmol cm–2 h–1) are obtained in aqueous electrolyte under ambient conditions. This strategy represents a general method to expand the library of catalysts and promoters for the selective electrochemical reduction of stable molecules. The electrochemical reduction of nitrogen to ammonia represents a challenge of major interest that would substantially decrease the burden of the energy-consuming Haber–Bosch process. Now, Yin, Yan, Zhang, Si and colleagues achieve high ammonia yield and Faradaic efficiency over 66% using bismuth nanocatalysts promoted by alkali cations.

Domino electroreduction of CO 2 to methanol on a molecular catalyst

Abstract: Electrochemical carbon dioxide (CO2) reduction can in principle convert carbon emissions to fuels and value-added chemicals, such as hydrocarbons and alcohols, using renewable energy, but the efficiency of the process is limited by its sluggish kinetics1,2. Molecular catalysts have well defined active sites and accurately tailorable structures that allow mechanism-based performance optimization, and transition-metal complexes have been extensively explored in this regard. However, these catalysts generally lack the ability to promote CO2 reduction beyond the two-electron process to generate more valuable products1,3. Here we show that when immobilized on carbon nanotubes, cobalt phthalocyanine—used previously to reduce CO2 to primarily CO—catalyses the six-electron reduction of CO2 to methanol with appreciable activity and selectivity. We find that the conversion, which proceeds via a distinct domino process with CO as an intermediate, generates methanol with a Faradaic efficiency higher than 40 per cent and a partial current density greater than 10 milliamperes per square centimetre at −0.94 volts with respect to the reversible hydrogen electrode in a near-neutral electrolyte. The catalytic activity decreases over time owing to the detrimental reduction of the phthalocyanine ligand, which can be suppressed by appending electron-donating amino substituents to the phthalocyanine ring. The improved molecule-based electrocatalyst converts CO2 to methanol with considerable activity and selectivity and with stable performance over at least 12 hours. Individual cobalt phthalocyanine derivative molecules immobilized on carbon nanotubes effectively catalyse the electroreduction of CO2 to methanol via a domino process with high activity and selectivity and stable performance.

Identification of single-atom active sites in carbon-based cobalt catalysts during electrocatalytic hydrogen evolution

Abstract: Monitoring atomic and electronic structure changes on active sites under realistic working conditions is crucial for the rational design of efficient electrocatalysts. Identification of the active structure during the alkaline hydrogen evolution reaction (HER), which is critical to industrial water–alkali electrolysers, remains elusive and is a field of intense research. Here, by virtue of operando X-ray absorption spectroscopy on a uniform cobalt single-site catalyst, we report the atomic-level identification of the dynamic structure of catalytically active sites under alkaline HER. Our results reveal the formation of a high-valence HO–Co1–N2 moiety by the binding between isolated Co1–N4 sites with electrolyte hydroxide, and further unravel the preferred water adsorption reaction intermediate H2O–(HO–Co1–N2). Theoretical simulations rationalize this structural evolution and demonstrate that the highly oxidized Co sites are responsible for the catalytic performance. These findings suggest the electrochemical susceptibility of active sites, providing a coordination-engineered strategy for the advance of single-site catalysis. Carbon-based single-atom catalysts usually rely on nitrogen co-doping to stabilize the single metal atoms as metal–N4 moieties. Now, Wei, Yao and colleagues make use of operando techniques to show that under alkaline hydrogen evolution reaction conditions the Co–N4 active site undergoes structural distortion to a HO–Co–N2 configuration.

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

Abstract: NH3 synthesis by the electrocatalytic N2 reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method-the Haber-Bosch process-that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen-doped porous carbon as a cost-effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH3 yield rate (34.0±3.6 μg NH 3 h-1 mgcat. -1 ) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non-precious-metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single-atom non-precious-metal catalysts for the electrocatalytic NRR.

3d-Metal Catalyzed N- and C-Alkylation Reactions via Borrowing Hydrogen or Hydrogen Autotransfer

Abstract: The conservation of our element resources is a fundamental challenge of mankind. The development of alcohol refunctionalization reactions is a possible fossil carbon conservation strategy since alcohols can be obtained from indigestible and abundantly available biomass. The conservation of our rare noble metals, frequently used in key technologies such as catalysis, might be feasible by replacing them with highly abundant metals. The alkylation of amines by alcohols and related C–C coupling reactions are early examples of alcohol refunctionalization reactions. These reactions follow mostly the borrowing hydrogen or hydrogen autotransfer catalysis concept, and many 3d-metal catalysts have been disclosed in recent years. In this review, we summarize the progress made in developing Cu, Ni, Co, Fe, and Mn catalysts for C–N and C–C bond formation reactions with alcohols and amines using the borrowing hydrogen or hydrogen autotransfer concept. We expect that the findings in this field will inspire others to dev...

Copper atom-pair catalyst anchored on alloy nanowires for selective and efficient electrochemical reduction of CO 2

Abstract: The electrochemical reduction of CO2 could play an important role in addressing climate-change issues and global energy demands as part of a carbon-neutral energy cycle. Single-atom catalysts can display outstanding electrocatalytic performance; however, given their single-site nature they are usually only amenable to reactions that involve single molecules. For processes that involve multiple molecules, improved catalytic properties could be achieved through the development of atomically dispersed catalysts with higher complexities. Here we report a catalyst that features two adjacent copper atoms, which we call an ‘atom-pair catalyst’, that work together to carry out the critical bimolecular step in CO2 reduction. The atom-pair catalyst features stable Cu10–Cu1x+ pair structures, with Cu1x+ adsorbing H2O and the neighbouring Cu10 adsorbing CO2, which thereby promotes CO2 activation. This results in a Faradaic efficiency for CO generation above 92%, with the competing hydrogen evolution reaction almost completely suppressed. Experimental characterization and density functional theory revealed that the adsorption configuration reduces the activation energy, which generates high selectivity, activity and stability under relatively low potentials. Anchored single-atom catalysts have recently been shown to be very active for various processes, however, a catalyst that features two adjacent copper atoms—which we call an atom-pair catalyst—is now reported. The Cu10–Cu1x+ pair structures work together to carry out the critical bimolecular step in CO2 reduction.

Scalable Production of Efficient Single-Atom Copper Decorated Carbon Membranes for CO2 Electroreduction to Methanol.

Abstract: Electrocatalytic reduction reaction of CO2 (CO2RR) is an effective way to mitigate energy and environmental issues. However, very limited catalysts are capable of converting CO2 resources into high-value products such as hydrocarbons or alcohols. Herein, we first propose a facile strategy for the large-scale synthesis of isolated Cu decorated through-hole carbon nanofibers (CuSAs/TCNFs). This CuSAs/TCNFs membrane has excellent mechanical properties and can be directly used as cathode for CO2RR, which could generate nearly pure methanol with 44% Faradaic efficiency in liquid phase. The self-supporting and through-hole structure of CuSAs/TCNFs greatly reduces the embedded metal atoms and produces abundant efficient Cu single atoms, which could actually participate in CO2RR, eventually causing -93 mA cm-2 partial current density for C1 products and more than 50 h stability in aqueous solution. According to DFT calculations, Cu single atoms possess a relatively higher binding energy for *CO intermediate. Therefore, *CO could be further reduced to products like methanol, instead of being easily released from the catalyst surface as CO product. This report may benefit the design of efficient and high-yield single-atom catalysts for other electrocatalytic reactions.

Single-boron catalysts for nitrogen reduction reaction

Abstract: Boron has been explored as p-block catalysts for nitrogen reduction reaction (NRR) by density functional theory. Unlike transition metals, on which the active centers need empty d orbitals to accept the lone-pair electrons of the nitrogen molecule, the sp3 hybrid orbital of the boron atom can form B-to-N π-back bonding. This results in the population of the N–N π* orbital and the concomitant decrease of the N–N bond order. We demonstrate that the catalytic activity of boron is highly correlated with the degree of charge transfer between the boron atom and the substrate. Among the 21 concept-catalysts, single boron atoms supported on graphene and substituted into h-MoS2 are identified as the most promising NRR catalysts, offering excellent energy efficiency and selectivity against hydrogen evolution reaction.

Ammonia Synthesis Under Ambient Conditions: Selective Electroreduction of Dinitrogen to Ammonia on Black Phosphorus Nanosheets.

Abstract: Constructing efficient catalysts for the N2 reduction reaction (NRR) is a major challenge for artificial nitrogen fixation under ambient conditions. Herein, inspired by the principle of "like dissolves like", it is demonstrated that a member of the nitrogen family, well-exfoliated few-layer black phosphorus nanosheets (FL-BP NSs), can be used as an efficient nonmetallic catalyst for electrochemical nitrogen reduction. The catalyst can achieve a high ammonia yield of 31.37 μg h-1 mg-1 cat. under ambient conditions. Density functional theory calculations reveal that the active orbital and electrons of zigzag and diff-zigzag type edges of FL-BP NSs enable selective electrocatalysis of N2 to NH3 via an alternating hydrogenation pathway. This work proves the feasibility of using a nonmetallic simple substance as a nitrogen-fixing catalyst and thus opening a new avenue towards the development of more efficient metal-free catalysts.

CO 2 hydrogenation to high-value products via heterogeneous catalysis.

Abstract: Recently, carbon dioxide capture and conversion, along with hydrogen from renewable resources, provide an alternative approach to synthesis of useful fuels and chemicals. People are increasingly interested in developing innovative carbon dioxide hydrogenation catalysts, and the pace of progress in this area is accelerating. Accordingly, this perspective presents current state of the art and outlook in synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols through two leading hydrogenation mechanisms: methanol reaction and Fischer-Tropsch based carbon dioxide hydrogenation. The future research directions for developing new heterogeneous catalysts with transformational technologies, including 3D printing and artificial intelligence, are provided. Carbon dioxide (CO2) capture and conversion provide an alternative approach to synthesis of useful fuels and chemicals. Here, Ye et al. give a comprehensive perspective on the current state of the art and outlook of CO2 catalytic hydrogenation to the synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols.

Highly selective oxygen reduction to hydrogen peroxide on transition metal single atom coordination.

Abstract: Shifting electrochemical oxygen reduction towards 2e- pathway to hydrogen peroxide (H2O2), instead of the traditional 4e- to water, becomes increasingly important as a green method for H2O2 generation. Here, through a flexible control of oxygen reduction pathways on different transition metal single atom coordination in carbon nanotube, we discovered Fe-C-O as an efficient H2O2 catalyst, with an unprecedented onset of 0.822 V versus reversible hydrogen electrode in 0.1 M KOH to deliver 0.1 mA cm-2 H2O2 current, and a high H2O2 selectivity of above 95% in both alkaline and neutral pH. A wide range tuning of 2e-/4e- ORR pathways was achieved via different metal centers or neighboring metalloid coordination. Density functional theory calculations indicate that the Fe-C-O motifs, in a sharp contrast to the well-known Fe-C-N for 4e-, are responsible for the H2O2 pathway. This iron single atom catalyst demonstrated an effective water disinfection as a representative application.

Electrochemical synthesis of hydrogen peroxide from water and oxygen

Abstract: H2O2 is important in large-scale industrial processes and smaller on-site activities. The present industrial route to H2O2 involves hydrogenation of an anthraquinone and O2 oxidation of the resulting dihydroanthraquinone — a costly method and one that is impractical for routine on-site use. Electrosynthesis of H2O2 is cost-effective and applicable on both large and small scales. This Review describes methods to design and assess electrode materials for H2O2 electrosynthesis. H2O2 can be prepared by oxidizing H2O at efficient anodic catalysts such as those based on BiVO4. Alternatively, H2O2 forms by partially reducing O2 at cathodes featuring either noble metal alloys or doped carbon. In addition to the catalyst materials used, one must also consider the form and geometry of the electrodes and the type of reactor in order to strike a balance between properties such as mass transport and electroactive area, both of which substantially affect both the selectivity and rate of reaction. Research into catalyst materials and reactor designs is arguably quite mature, such that the future of H2O2 electrosynthesis will instead depend on the design of complete and efficient electrosynthesis systems, in which the complementary properties of the catalysts and the reactor lead to optimal selectivity and overall yield. Electrosynthesis is a practical and green route to hydrogen peroxide, and could reduce our dependence on less environmentally friendly oxidants. This Review describes catalyst and reactor designs for highly selective hydrogen peroxide electrosynthesis.

An Isolated Zinc–Cobalt Atomic Pair for Highly Active and Durable Oxygen Reduction

Abstract: A competitive complexation strategy has been developed to construct a novel electrocatalyst with Zn-Co atomic pairs coordinated on N doped carbon support (Zn/CoN-C). Such architecture offers enhanced binding ability of O2 , significantly elongates the O-O length (from 1.23 A to 1.42 A), and thus facilitates the cleavage of O-O bond, showing a theoretical overpotential of 0.335 V during ORR process. As a result, the Zn/CoN-C catalyst exhibits outstanding ORR performance in both alkaline and acid conditions with a half-wave potential of 0.861 and 0.796 V respectively. The in situ XANES analysis suggests Co as the active center during the ORR. The assembled zinc-air battery with Zn/CoN-C as cathode catalyst presents a maximum power density of 230 mW cm-2 along with excellent operation durability. The excellent catalytic activity in acid is also verified by H2 /O2 fuel cell tests (peak power density of 705 mW cm-2 ).

Highly Efficient and Selective Generation of Ammonia and Hydrogen on a Graphdiyne-Based Catalyst.

Abstract: The emergence of zerovalent atom catalysts has been highly attractive for catalytic science. For many years, scientists have explored the stability of zerovalent atom catalysts and demonstrated their unique properties. Here, we describe an atom catalyst (AC) with atomically dispersed zerovalent molybdenum atoms on graphdiyne (Mo0/GDY) with a high mass content of Mo atoms (up to 7.5 wt %) that was synthesized via a facile and scalable process. The catalyst shows both excellent selectivity and activity in the electrochemical reduction of nitrogen and in the hydrogen evolution reaction in aqueous solutions at room temperature and pressure. It is noted that this catalyst is the first bifunctional AC for highly efficient and selective ammonia and hydrogen generation. The catalytic process of our catalyst is well understood, the structure is defined, and the performance is excellent, providing a solid foundation for the generation and application of the new generation of catalysts.

Active Sites and Mechanism of Oxygen Reduction Reaction Electrocatalysis on Nitrogen-Doped Carbon Materials.

Abstract: The oxygen reduction reaction (ORR) is a core reaction for electrochemical energy technologies such as fuel cells and metal-air batteries. ORR catalysts have been limited to platinum, which meets the requirements of high activity and durability. Over the last few decades, a variety of materials have been tested as non-Pt catalysts, from metal-organic complex molecules to metal-free catalysts. In particular, nitrogen-doped graphitic carbon materials, including N-doped graphene and N-doped carbon nanotubes, have been extensively studied. However, due to the lack of understanding of the reaction mechanism and conflicting knowledge of the catalytic active sites, carbon-based catalysts are still under the development stage of achieving a performance similar to Pt-based catalysts. In addition to the catalytic viewpoint, designing mass transport pathways is required for O2 . Recently, the importance of pyridinic N for the creation of active sites for ORR and the requirement of hydrophobicity near the active sites have been reported. Based on the increased knowledge in controlling ORR performances, bottom-up preparation of N-doped carbon catalysts, using N-containing conjugative molecules as the assemblies of the catalysts, is promising. Here, the recent understanding of the active sites and the mechanism of ORRs on N-doped carbon catalysts are reviewed.

Ultrahigh-Loading Zinc Single-Atom Catalyst for Highly Efficient Oxygen Reduction in Both Acidic and Alkaline Media

Abstract: Atomically dispersed Zn-N-C nanomaterials are promising platinum-free catalysts for the oxygen reduction reaction (ORR). However, the fabrication of Zn-N-C catalysts with a high Zn loading remains a formidable challenge owing to the high volatility of the Zn precursor during high-temperature annealing. Herein, we report that an atomically dispersed Zn-N-C catalyst with an ultrahigh Zn loading of 9.33 wt % could be successfully prepared by simply adopting a very low annealing rate of 1° min-1 . The Zn-N-C catalyst exhibited comparable ORR activity to that of Fe-N-C catalysts, and significantly better ORR stability than Fe-N-C catalysts in both acidic and alkaline media. Further experiments and DFT calculations demonstrated that the Zn-N-C catalyst was less susceptible to protonation than the corresponding Fe-N-C catalyst in an acidic medium. DFT calculations revealed that the Zn-N4 structure is more electrochemically stable than the Fe-N4 structure during the ORR process.

MXene (Ti3C2) Vacancy-Confined Single-Atom Catalyst for Efficient Functionalization of CO2

Abstract: A central topic in single-atom catalysis is building strong interactions between single atoms and the support for stabilization. Herein we report the preparation of stabilized single-atom catalysts via a simultaneous self-reduction stabilization process at room temperature using ultrathin two-dimensional Ti3–xC2TyMXene nanosheets characterized by abundant Ti-deficit vacancy defects and a high reducing capability. The single atoms therein form strong metal–carbon bonds with the Ti3–xC2Ty support and are therefore stabilized onto the sites previously occupied by Ti. Pt-based single-atom catalyst (SAC) Pt1/Ti3–xC2Ty offers a green route to utilizing greenhouse gas CO2, via the formylation of amines, as a C1 source in organic synthesis. DFT calculations reveal that, compared to Pt nanoparticles, the single Pt atoms on Ti3–xC2Ty support feature partial positive charges and atomic dispersion, which helps to significantly decrease the adsorption energy and activation energy of silane, CO2, and aniline, thereby b...