Channel (digital image)

About: Channel (digital image) is a research topic. Over the lifetime, 7211 publications have been published within this topic receiving 69974 citations.

Color to Gray: Visual Cue Preservation

Abstract: Both commercial and scientific applications often need to transform color images into gray-scale images, e.g., to reduce the publication cost in printing color images or to help color blind people see visual cues of color images. However, conventional color to gray algorithms are not ready for practical applications because they encounter the following problems: 1) Visual cues are not well defined so it is unclear how to preserve important cues in the transformed gray-scale images; 2) some algorithms have extremely high time cost for computation; and 3) some require human-computer interactions to have a reasonable transformation. To solve or at least reduce these problems, we propose a new algorithm based on a probabilistic graphical model with the assumption that the image is defined over a Markov random field. Thus, color to gray procedure can be regarded as a labeling process to preserve the newly well--defined visual cues of a color image in the transformed gray-scale image. Visual cues are measurements that can be extracted from a color image by a perceiver. They indicate the state of some properties of the image that the perceiver is interested in perceiving. Different people may perceive different cues from the same color image and three cues are defined in this paper, namely, color spatial consistency, image structure information, and color channel perception priority. We cast color to gray as a visual cue preservation procedure based on a probabilistic graphical model and optimize the model based on an integral minimization problem. We apply the new algorithm to both natural color images and artificial pictures, and demonstrate that the proposed approach outperforms representative conventional algorithms in terms of effectiveness and efficiency. In addition, it requires no human-computer interactions.

The Rehabilitation of MaxRGB

Abstract: The poor performance of the MaxRGB illuminationestimation method is often used in the literature as a foil when promoting some new illumination-estimation method. However, the results presented here show that in fact MaxRGB works surprisingly well when tested on a new dataset of 105 high dynamic range images, and also better than previously reported when some simple pre-processing is applied to the images of the standard 321 image set [1]. The HDR images in the dataset for color constancy research were constructed in the standard way from multiple exposures of the same scene. The color of the scene illumination was determined by photographing an extra HDR image of the scene with 4 Gretag Macbeth mini Colorcheckers at 45 degrees relative to one another placed in it. With preprocessing, MaxRGB’s performance is statistically equivalent to that of Color by Correlation [2] and statistically superior to that of the Greyedge [3] algorithm on the 321 set (null hypothesis rejected at the 5% significance level). It also performs as well as Greyedge on the HDR set. These results demonstrate that MaxRGB is far more effective than it has been reputed to be so long as it is applied to image data that encodes the full dynamic range of the original scene. Introduction MaxRGB is an extremely simple method of estimating the chromaticity of the scene illumination for color constancy and automatic white balancing based on the assumption that the triple of maxima obtained independently from each of the three color channels represents the color of the illumination. It is often used as a foil to demonstrate how much better some newly proposed algorithm performs in comparison. However, is its performance really as bad as it has been reported [1,3-5] to be? Is it really any worse than the algorithms to which it is compared?1 The prevailing belief in the field about the inadequacy of MaxRGB is reflected in the following two quotations from two different anonymous reviewers criticizing a manuscript describing a different illumination-estimation proposal: “Almost no-one uses Max RGB in the field (or in commercial cameras). That this, rejected method, gives better performance than the (proposed) method is grounds alone for rejection.” “The first and foremost thing that attracts attention is the remarkable performance of the Scale-by-Max (i.e. White-Patch) algorithm. This algorithm has the highest performance on two of the three data sets, which is quite remarkable by itself.”   Paper’s title inspired by Charles Poynton, “The Rehabilitation of Gamma,” Proc. of Human Vision and Electronic Imaging III SPIE 3299, 232-249, 1998. We hypothesize that there are two reasons why the effectiveness of MaxRGB may have been underestimated. One is that it is important not to apply MaxRGB naively as the simple maximum of each channel, but rather it is necessary to preprocess the image data somewhat before calculating the maximum, otherwise a single bad pixel or spurious noise will lead to the maximum being incorrect. The second is that MaxRGB generally has been applied to 8-bit-per-channel, non-linear images, for which there is both significant tone-curve compression and clipping of high intensity values. To test the pre-processing hypothesis, the effects of preprocessing by median filtering, and resizing by bilinear filtering, are compared to that of the common pre-processing, which simply discards pixels for which at least one channel is maximal (i.e., for n-bit images when R=2n-1 or G=2n-1 or B=2n-1). To test the dynamic-range hypothesis, a new HDR dataset for color constancy research has been constructed which consists of images of 105 scenes. For each scene there are HDR2 (high dynamic range) images with and without Macbeth mini Colorchecker charts, from which the chromaticity of the scene illumination is measured. This data set is now available on-line. MaxRGB is a special and extremely limited case of Retinex [6]. In particular, it corresponds to McCann99 Retinex [7] when the number of iterations is infinite, or to path-based Retinex [8] without thresholding but with infinite paths. Retinex and MaxRGB both depend on the assumption that either there is a white surface in the scene, or there are three separate surfaces reflecting maximally in the R, G and B sensitivity ranges. In practice, most digital still cameras are incapable of capturing the full dynamic range of a scene and use exposures and tone reproduction curves that clip or compress high digital counts. As a result, the maximum R, G and B digital counts from an image generally do not faithfully represent the corresponding maximum scene radiances. Barnard et al. [9] present some tests using artificial clipping of images that show the effect that lack of dynamic range can have on various illumination-estimation algorithms. To determine whether or not MaxRGB is really as poor as it is report to be in comparison to other illumination-estimation algorithms, we compare the performance of several algorithms on the new image database. We also find that two simple preprocessing strategies lead to significant performance improvement in the case of MaxRGB. Tests described below show that MaxRGB performs as well on this new HDR data set as other representative and recently published algorithms. We also find that two simple pre-processing strategies lead to significant performance improvement. The results reported here extend those of an earlier study [10] in a number of ways: the size of the dataset   2 Note that the scenes were not necessarily of high dynamic range. The term HDR is used here to mean simply that that full dynamic range of the scene is captured within the image. 3 www.cs.sfu.ca/~colour/data  Page 1 of 4

Apparatus and a method for reducing red-eye in a digital image

Abstract: A red-eye reduction system is described that includes a masking module. The masking module converts an image into a mask having first state areas representing red color pixels of the image and second state areas representing other color pixels of the image. The image includes an eye with a red pupil. A pupil locating module is coupled to the masking module to locate a substantially first state area in the mask that resembles a pupil. A color replacing module is then coupled to the pupil locating module to change the red color pixels in the area into monochrome (grey) or other predefined colors. The color replacing module also adjusts the boundary of the area by changing the colors of pixels in close proximity to the area if the color of these pixels is determined to be sufficiently close to red such that natural appearance of the eye is maintained when reducing the red pupil. A method of reducing red-eye effect in a digital image is also described.

Incorporating connected region labelling into automated image registration using mutual information

Abstract: The information theoretic measure of mutual information has been successfully applied to multi-modality medical image registration for several applications. There remain however; modality combinations for which mutual information derived from the occurrence of image intensities alone does not provide a distinct optimum at true registration. The authors propose an extension of the technique through the use of an additional information channel supplying region labelling information. These labels which can specify simple regional connectivity or express higher level anatomical knowledge, can be derived from the images being registered. The authors show how the mutual information measure can be extended to include an additional channel of region labelling, and demonstrate the effectiveness of this technique for the registration of MR and PET images of the pelvis.

Fast single image fog removal using the adaptive Wiener filter

Abstract: We present in this paper a fast single image defogging method that uses a novel approach to refining the estimate of amount of fog in an image with the Locally Adaptive Wiener Filter. We provide a solution for estimating noise parameters for the filter when the observation and noise are correlated by decorrelating with a naively estimated defogged image. We demonstrate our method is 50 to 100 times faster than existing fast single image defogging methods and that our proposed method subjectively performs as well as the Spectral Matting smoothed Dark Channel Prior method.