Showing papers on "Communication channel published in 2009"
TL;DR: There are no standardized models for the acoustic channel fading, and experimental measurements are often made to assess the statistical properties of the channel in particular deployment sites, but the channel capacity depends on the distance, and may be extremely limited.
Abstract: Acoustic propagation is characterized by three major factors: attenuation that increases with signal frequency, time-varying multipath propagation, and low speed of sound (1500 m/s). The background noise, although often characterized as Gaussian, is not white, but has a decaying power spectral density. The channel capacity depends on the distance, and may be extremely limited. Because acoustic propagation is best supported at low frequencies, although the total available bandwidth may be low, an acoustic communication system is inherently wideband in the sense that the bandwidth is not negligible with respect to its center frequency. The channel can have a sparse impulse response, where each physical path acts as a time-varying low-pass filter, and motion introduces additional Doppler spreading and shifting. Surface waves, internal turbulence, fluctuations in the sound speed, and other small-scale phenomena contribute to random signal variations. At this time, there are no standardized models for the acoustic channel fading, and experimental measurements are often made to assess the statistical properties of the channel in particular deployment sites.
1,493 citations
01 Jan 2009
TL;DR: It is demonstrated that when designed properly, integral channel features not only outperform other features including histogram of oriented gradient (HOG), they also result in fast detectors when coupled with cascade classifiers.
Abstract: We study the performance of ‘integral channel features’ for image classification tasks,
focusing in particular on pedestrian detection. The general idea behind integral channel features is that multiple registered image channels are computed using linear and
non-linear transformations of the input image, and then features such as local sums, histograms, and Haar features and their various generalizations are efficiently computed
using integral images. Such features have been used in recent literature for a variety of
tasks – indeed, variations appear to have been invented independently multiple times.
Although integral channel features have proven effective, little effort has been devoted to
analyzing or optimizing the features themselves. In this work we present a unified view
of the relevant work in this area and perform a detailed experimental evaluation. We
demonstrate that when designed properly, integral channel features not only outperform
other features including histogram of oriented gradient (HOG), they also (1) naturally
integrate heterogeneous sources of information, (2) have few parameters and are insensitive to exact parameter settings, (3) allow for more accurate spatial localization during
detection, and (4) result in fast detectors when coupled with cascade classifiers.
1,383 citations
11 Dec 2009
TL;DR: Various channel estimators that exploit the channel sparsity in a multicarrier underwater acoustic system are presented, including subspace algorithms from the array precessing literature, namely root-MUSIC and ESPRIT, and recent compressed sensing algorithms in form of Orthogonal Matching Pursuit and Basis Pursuit.
Abstract: In this paper, we investigate various channel estimators that exploit channel sparsity in the time and/or Doppler domain for a multicarrier underwater acoustic system. We use a path-based channel model, where the channel is described by a limited number of paths, each characterized by a delay, Doppler scale, and attenuation factor, and derive the exact inter-carrier-interference (ICI) pattern. For channels that have limited Doppler spread we show that subspace algorithms from the array processing literature, namely Root-MUSIC and ESPRIT, can be applied for channel estimation. For channels with Doppler spread, we adopt a compressed sensing approach, in form of Orthogonal Matching Pursuit (OMP) and Basis Pursuit (BP) algorithms, and utilize overcomplete dictionaries with an increased path delay resolution. Numerical simulation and experimental data of an OFDM block-by-block receiver are used to evaluate the proposed algorithms in comparison to the conventional least-squares (LS) channel estimator. We observe that subspace methods can tolerate small to moderate Doppler effects, and outperform the LS approach when the channel is indeed sparse. On the other hand, compressed sensing algorithms uniformly outperform the LS and subspace methods. Coupled with a channel equalizer mitigating ICI, the compressed sensing algorithms can effectively handle channels with significant Doppler spread.
712 citations
TL;DR: In this paper, a deterministic channel model was proposed for Gaussian networks with a single source and a single destination and an arbitrary number of relay nodes, and a quantize-map-and-forward scheme was proposed.
Abstract: In a wireless network with a single source and a single destination and an arbitrary number of relay nodes, what is the maximum rate of information flow achievable? We make progress on this long standing problem through a two-step approach. First we propose a deterministic channel model which captures the key wireless properties of signal strength, broadcast and superposition. We obtain an exact characterization of the capacity of a network with nodes connected by such deterministic channels. This result is a natural generalization of the celebrated max-flow min-cut theorem for wired networks. Second, we use the insights obtained from the deterministic analysis to design a new quantize-map-and-forward scheme for Gaussian networks. In this scheme, each relay quantizes the received signal at the noise level and maps it to a random Gaussian codeword for forwarding, and the final destination decodes the source's message based on the received signal. We show that, in contrast to existing schemes, this scheme can achieve the cut-set upper bound to within a gap which is independent of the channel parameters. In the case of the relay channel with a single relay as well as the two-relay Gaussian diamond network, the gap is 1 bit/s/Hz. Moreover, the scheme is universal in the sense that the relays need no knowledge of the values of the channel parameters to (approximately) achieve the rate supportable by the network. We also present extensions of the results to multicast networks, half-duplex networks and ergodic networks.
601 citations
TL;DR: In this article, the authors proposed a spectrum-sensing algorithm based on the sample covariance matrix calculated from a limited number of received signal samples, and two test statistics are then extracted from the sampled covariance matrices.
Abstract: Spectrum sensing, i.e., detecting the presence of primary users in a licensed spectrum, is a fundamental problem in cognitive radio. Since the statistical covariances of the received signal and noise are usually different, they can be used to differentiate the case where the primary user's signal is present from the case where there is only noise. In this paper, spectrum-sensing algorithms are proposed based on the sample covariance matrix calculated from a limited number of received signal samples. Two test statistics are then extracted from the sample covariance matrix. A decision on the signal presence is made by comparing the two test statistics. Theoretical analysis for the proposed algorithms is given. Detection probability and the associated threshold are found based on the statistical theory. The methods do not need any information about the signal, channel, and noise power a priori. In addition, no synchronization is needed. Simulations based on narrow-band signals, captured digital television (DTV) signals, and multiple antenna signals are presented to verify the methods.
530 citations
TL;DR: This paper presents an alternative characterization of the secrecy capacity of the multiple-antenna wiretap channel under a more general matrix constraint on the channel input using a channel-enhancement argument.
Abstract: The secrecy capacity of the multiple-antenna wiretap channel under the average total power constraint was recently characterized, independently, by Khisti and Wornell and Oggier and Hassibi using a Sato-like argument and matrix analysis tools. This paper presents an alternative characterization of the secrecy capacity of the multiple-antenna wiretap channel under a more general matrix constraint on the channel input using a channel-enhancement argument. This characterization is by nature information-theoretic and is directly built on the intuition regarding to the optimal transmission strategy in this communication scenario.
509 citations
TL;DR: In this paper, the authors provide an overview of existing VTV channel measurement campaigns in a variety of important environments, and the channel characteristics (such as delay spreads and Doppler spreads) therein.
Abstract: Traffic telematics applications are currently under intense research and development for making transportation safer, more efficient, and more environmentally friendly. Reliable traffic telematics applications and services require vehicle-to-vehicle wireless communications that can provide robust connectivity, typically at data rates between 1 and 10 Mb/s. The development of such VTV communications systems and standards require, in turn, accurate models for the VTV propagation channel. A key characteristic of VTV channels is their temporal variability and inherent non-stationarity, which has major impact on data packet transmission reliability and latency. This article provides an overview of existing VTV channel measurement campaigns in a variety of important environments, and the channel characteristics (such as delay spreads and Doppler spreads) therein. We also describe the most commonly used channel modeling approaches for VTV channels: statistical as well as geometry-based channel models have been developed based on measurements and intuitive insights. Extensive references are provided.
441 citations
TL;DR: It is shown that a myopic policy that maximizes the immediate one-step reward is optimal when the state transitions are positively correlated over time and when the number of channels is limited to two or three, while presenting a counterexample for the case of four channels.
Abstract: This paper considers opportunistic communication over multiple channels where the state (ldquogoodrdquo or ldquobadrdquo) of each channel evolves as independent and identically distributed (i.i.d.) Markov processes. A user, with limited channel sensing capability, chooses one channel to sense and decides whether to use the channel (based on the sensing result) in each time slot. A reward is obtained whenever the user senses and accesses a ldquogoodrdquo channel. The objective is to design a channel selection policy that maximizes the expected total (discounted or average) reward accrued over a finite or infinite horizon. This problem can be cast as a partially observed Markov decision process (POMDP) or a restless multiarmed bandit process, to which optimal solutions are often intractable. This paper shows that a myopic policy that maximizes the immediate one-step reward is optimal when the state transitions are positively correlated over time. When the state transitions are negatively correlated, we show that the same policy is optimal when the number of channels is limited to two or three, while presenting a counterexample for the case of four channels. This result finds applications in opportunistic transmission scheduling in a fading environment, cognitive radio networks for spectrum overlay, and resource-constrained jamming and antijamming.
416 citations
TL;DR: A new wideband multiple-input-multiple-output (MIMO) model for VTV channels based on extensive MIMO channel measurements performed at 5.2 GHz in highway and rural environments in Lund, Sweden is presented.
Abstract: Vehicle-to-vehicle (VTV) wireless communications have many envisioned applications in traffic safety and congestion avoidance, but the development of suitable communications systems and standards requires accurate models for the VTV propagation channel. In this paper, we present a new wideband multiple-input-multiple-output (MIMO) model for VTV channels based on extensive MIMO channel measurements performed at 5.2 GHz in highway and rural environments in Lund, Sweden. The measured channel characteristics, in particular the nonstationarity of the channel statistics, motivate the use of a geometry-based stochastic channel model (GSCM) instead of the classical tapped-delay line model. We introduce generalizations of the generic GSCM approach and techniques for parameterizing it from measurements and find it suitable to distinguish between diffuse and discrete scattering contributions. The time-variant contribution from discrete scatterers is tracked over time and delay using a high resolution algorithm, and our observations motivate their power being modeled as a combination of a (deterministic) distance decay and a slowly varying stochastic process. The paper gives a full parameterization of the channel model and supplies an implementation recipe for simulations. The model is verified by comparison of MIMO antenna correlations derived from the channel model to those obtained directly from the measurements.
414 citations
TL;DR: Simulation shows that network beamforming achieves the maximal diversity order and outperforms other existing schemes.
Abstract: This paper deals with beamforming in wireless relay networks with perfect channel information at the relays, receiver, and transmitter if there is a direct link between the transmitter and receiver. It is assumed that every node in the network has its own power constraint. A two-step amplify-and-forward protocol is used, in which the transmitter and relays not only use match filters to form a beam at the receiver but also adaptively adjust their transmit powers according to the channel strength information. For networks with no direct link, an algorithm is proposed to analytically find the exact solution with linear (in network size) complexity. It is shown that the transmitter should always use its maximal power while the optimal power of a relay ca.n take any value between zero and its maxima. Also, this value depends on the quality of all other channels in addition to the relay's own. Despite this coupling fact, distributive strategies are proposed in which, with the aid of a low-rate receiver broadcast, a relay needs only its own channel information to implement the optimal power control. Then, beamforming in networks with a direct link is considered. When the direct link exists during the first step only, the optimal power control is the same as that of networks with no direct link. For networks with a direct link during the second step only and both steps, recursive numerical algorithms are proposed. Simulation shows that network beamforming achieves the maximal diversity order and outperforms other existing schemes.
412 citations
16 Aug 2009
TL;DR: The throughput gains using SoftRate stem from its ability to react to channel variations within a single packet-time and its robustness to collision losses.
Abstract: This paper presents SoftRate, a wireless bit rate adaptation protocol that is responsive to rapidly varying channel conditions. Unlike previous work that uses either frame receptions or signal-to-noise ratio (SNR) estimates to select bit rates, SoftRate uses confidence information calculated by the physical layer and exported to higher layers via the SoftPHY interface to estimate the prevailing channel bit error rate (BER). Senders use this BER estimate, calculated over each received packet (even when the packet has no bit errors), to pick good bit rates. SoftRate's novel BER computation works across different wireless environments and hardware without requiring any retraining. SoftRate also uses abrupt changes in the BER estimate to identify interference, enabling it to reduce the bit rate only in response to channel errors caused by attenuation or fading. Our experiments conducted using a software radio prototype show that SoftRate achieves 2X higher throughput than popular frame-level protocols such as SampleRate and RRAA. It also achieves 20% more throughput than an SNR-based protocol trained on the operating environment, and up to 4X higher throughput than an untrained SNR-based protocol. The throughput gains using SoftRate stem from its ability to react to channel variations within a single packet-time and its robustness to collision losses.
TL;DR: An overview of recent medium access control, routing, transport, and cross-layer networking protocols for underwater wireless applications is provided.
Abstract: Underwater wireless communications can enable many scientific, environmental, commercial, safety, and military applications. Wireless signal transmission is also crucial to remotely control instruments in ocean observatories and to enable coordination of swarms of autonomous underwater vehicles and robots, which will play the role of mobile nodes in future ocean observation networks by virtue of their flexibility and reconfigurability. To make underwater applications viable, efficient communication protocols among underwater devices, which are based on acoustic wireless technology for distances over one hundred meters, must be enabled because of the high attenuation and scattering that affect radio and optical waves, respectively. The unique characteristics of an underwater acoustic channel - such as very limited and distance-dependent bandwidth, high propagation delays, and time-varying multipath and fading - require new, efficient and reliable communication protocols to network multiple devices, either static or mobile, potentially over multiple hops. In this article, we provide an overview of recent medium access control, routing, transport, and cross-layer networking protocols.
TL;DR: It is shown that, for this channel, Gaussian signalling in the form of beam-forming is optimal, and no pre-processing of information is necessary.
Abstract: We find the secrecy capacity of the 2-2-1 Gaussian MIMO wiretap channel, which consists of a transmitter and a receiver with two antennas each, and an eavesdropper with a single antenna. We determine the secrecy capacity of this channel by proposing an achievable scheme and then developing a tight upper bound that meets the proposed achievable secrecy rate. We show that, for this channel, Gaussian signalling in the form of beam-forming is optimal, and no pre-processing of information is necessary.
TL;DR: This paper redesigns the belief propagation decoding algorithm of the RA code for traditional point-to-point channel to suit the need of the PNC multiple-access channel and shows that the new scheme outperforms the previously proposed schemes significantly in terms of BER without added complexity.
Abstract: This paper investigates link-by-link channel-coded PNC (physical layer network coding), in which a critical process at the relay is to transform the superimposed channel-coded packets received from the two end nodes (plus noise), Y3 = X1+ X2+W3, to the network-coded combination of the source packets, S1 oplus S2. This is in contrast to the traditional multiple-access problem, in which the goal is to obtain both S1 and S2 explicitly at the relay node. Trying to obtain S1 and S2 explicitly is an overkill if we are only interested in S1oplusS2. In this paper, we refer to the transformation Y3 rarr S1 oplus S2 as the channel-decoding- network-coding process (CNC) in that it involves both channel decoding and network coding operations. This paper shows that if we adopt the repeat accumulate (RA) channel code at the two end nodes, then there is a compatible decoder at the relay that can perform the transformation Y3 rarr S1oplusS2 efficiently. Specifically, we redesign the belief propagation decoding algorithm of the RA code for traditional point-to-point channel to suit the need of the PNC multiple-access channel. Simulation results show that our new scheme outperforms the previously proposed schemes significantly in terms of BER without added complexity.
TL;DR: The results of millimeter-wave 60-GHz frequency range propagation channel measurements that are performed in various indoor environments for continuous-route and direction-of-arrival (DOA) measurement campaigns are presented and diffraction is found to be a significant propagation mechanism in NLOS propagation environments.
Abstract: This paper presents and analyzes the results of millimeter-wave 60-GHz frequency range propagation channel measurements that are performed in various indoor environments for continuous-route and direction-of-arrival (DOA) measurement campaigns. The statistical parameters of the propagation channel, such as the number of paths, the RMS delay spread, the path loss, and the shadowing, are inspected. Moreover, the interdependencies of different characteristics of the multipath channel are also investigated. A linear relationship between the number of paths and the delay spread is found, negative cross correlation between the shadow fading and the delay spread can be established, and an upper bound exponential model of the delay spread and the path loss is developed to estimate the worst case of the RMS delay spread at given path loss. Based on the DOA measurements that are carried out in a room [line of sight (LOS)] and in a corridor with both LOS and nonline-of-sight (NLOS) scenarios, radio-wave propagation mechanisms are studied. It is found that considering the direct wave and the first-order reflected waves from smooth surfaces is sufficient in the LOS cases. Transmission loss is very high; however, diffraction is found to be a significant propagation mechanism in NLOS propagation environments. The results can be used for the design of 60-GHz radio systems in short-range wireless applications.
TL;DR: The compound wiretap channel is considered, which generalizes Wyner's wiretap model to allow the channels to the (legitimate) receiver and to the eavesdropper to take a number of possible states, and the secrecy capacity is established and an achievable is given for the general case.
Abstract: This paper considers the compound wiretap channel, which generalizes Wyner's wiretap model to allow the channels to the (legitimate) receiver and to the eavesdropper to take a number of possible states. No matter which states occur, the transmitter guarantees that the receiver decodes its message and that the eavesdropper is kept in full ignorance about the message. The compound wiretap channel can also be viewed as a multicast channel with multiple eavesdroppers, in which the transmitter sends information to all receivers and keeps the information secret from all eavesdroppers. For the discrete memoryless channel, lower and upper bounds on the secrecy capacity are derived. The secrecy capacity is established for the degraded channel and the semideterministic channel with one receiver. The parallel Gaussian channel is further studied. The secrecy capacity and the secrecy degree of freedom (s.d.o. f.) are derived for the degraded case with one receiver. Schemes to achieve the s.d.o. f. for the case with two receivers and two eavesdroppers are constructed to demonstrate the necessity of a prefix channel in encoder design. Finally, the multi-antenna (i.e., MIMO) compound wiretap channel is studied. The secrecy capacity is established for the degraded case and an achievable s.d.o. f. is given for the general case.
TL;DR: A dynamic programming approach to the search for an optimal sensing order with adaptive modulation is presented and it is proved that a simple optimal sensing Order does exist.
Abstract: This paper investigates the optimal sensing order problem in multi-channel cognitive medium access control with opportunistic transmissions. The scenario in which the availability probability of each channel is known is considered first. In this case, when the potential channels are identical (except for the availability probabilities) and independent, it is shown that, although the intuitive sensing order (i.e., descending order of the channel availability probabilities) is optimal when adaptive modulation is not used, it does not lead to optimality in general with adaptive modulation. Thus, a dynamic programming approach to the search for an optimal sensing order with adaptive modulation is presented. For some special cases, it is proved that a simple optimal sensing order does exist. More complex scenarios are then considered, e.g., in which the availability probability of each channel is unknown. Optimal strategies are developed to address the challenges created by this additional uncertainty. Finally, a scheme is developed to address the issue of sensing errors.
TL;DR: The state-of-the-art in V2V channel measurements and modeling is reviewed in vehicle-to-vehicle communications and some challenges are addressed for future studies.
Abstract: Vehicle-to-vehicle communications have recently received much attention due to some new applications, such as wireless mobile ad hoc networks, relay-based cellular networks, and intelligent transportation systems for dedicated short range communications. The underlying V2V channels, as a foundation for the understanding and design of V2V communication systems, have not yet been sufficiently investigated. This article aims to review the state-of-the-art in V2V channel measurements and modeling. Some important V2V channel measurement campaigns and models are briefly described and classified. Finally, some challenges of V2V channel measurements and modeling are addressed for future studies.
TL;DR: The MI waveguide technique for communication is developed to address the high attenuation challenges of MI waves through soil, and a channel model is provided to characterize the wireless channel for WUCNs in underground mines and road/subway tunnels.
20 Sep 2009
TL;DR: A detailed spectrum measurement study with data collected in the 20 MHz to 3 GHz spectrum band and at four locations concurrently in Guangdong province of China finds that the channel vacancy durations follow an exponential-like distribution, but are not independently distributed over time.
Abstract: Dynamic spectrum access has been a subject of extensive research activity in recent years. The increasing volume of literature calls for a deeper understanding of the characteristics of current spectrum utilization. In this paper we present a detailed spectrum measurement study, with data collected in the 20MHz to 3GHz spectrum band and at four locations concurrently in South China. We examine the first and second order statistics of the collected data, including channel occupancy/vacancy statistics, channel utilization within each individual wireless service, and the temporal, spectral, and spatial correlation of these measures. Main findings include that the channel vacancy durations follow an exponential-like distribution, but are not independently distributed over time, and that significant spectral and spatial correlations are found between channels of the same service. We then exploit such spectrum correlation to develop a 2-dimensional frequent pattern mining algorithm that can accurately predict channel availability based on past observations.
01 Nov 2009
TL;DR: The propagation channel between two half-wavelength dipoles at 2.45 GHz, placed near a human body is discussed and an application for cross-layer design is presented in order to optimize the energy consumption of different topologies.
Abstract: Wireless body area networks (WBANs) offer many promising new applications in the area of remote health monitoring. An important element in the development of a WBAN is the characterization of the physical layer of the network, including an estimation of the delay spread and the path loss between two nodes on the body. This paper discusses the propagation channel between two half-wavelength dipoles at 2.45 GHz, placed near a human body and presents an application for cross-layer design in order to optimize the energy consumption of different topologies. Propagation measurements are performed on real humans in a multipath environment, considering different parts of the body separately. In addition, path loss has been numerically investigated with an anatomically correct model of the human body in free space using a 3-D electromagnetic solver. Path loss parameters and time-domain channel characteristics are extracted from the measurement and simulation data. A semi-empirical path loss model is presented for an antenna height above the body of 5 mm and antenna separations from 5 cm up to 40 cm. A time-domain analysis is performed and models are presented for the mean excess delay and the delay spread. As a cross-layer application, the proposed path loss models are used to evaluate the energy efficiency of single-hop and multihop network topologies.
Posted Content•
TL;DR: This paper proposes an achievable scheme composed of nested lattice codes for the uplink and structured binning for the downlink and shows that the scheme achieves within 1/2 bit from the cut-set bound for all channel parameters and becomes asymptotically optimal as the signal to noise ratios increase.
Abstract: In this paper, a Gaussian two-way relay channel, where two source nodes exchange messages with each other through a relay, is considered. We assume that all nodes operate in full-duplex mode and there is no direct channel between the source nodes. We propose an achievable scheme composed of nested lattice codes for the uplink and structured binning for the downlink. We show that the scheme achieves within 1/2 bit from the cut-set bound for all channel parameters and becomes asymptotically optimal as the signal to noise ratios increase.
TL;DR: The most prominent driver applications for 60 GHz are considered in order to identify those environment types that need to be characterized most urgently and some research directions for future channel characterization are given.
Abstract: An extensive review of the statistical characterization of 60-GHz indoor radio channels is provided from a large number of published measurement and modeling results. First, the most prominent driver applications for 60 GHz are considered in order to identify those environment types that need to be characterized most urgently. Large-scale fading is addressed yielding path-loss parameter values for a generic 60-GHz indoor channel model as well as for the office environment in particular. In addition, the small-scale channel behavior is reviewed including the modeling of time-of-arrival and angle-of-arrival details and statistical parameters related to delay spread, angular spread and Doppler spread. Finally, some research directions for future channel characterization are given.
TL;DR: The impact of the choice of the interference model is investigated, on the conclusions that can be drawn regarding the performance of wireless networks, by comparing different wireless interference models and feels that an SINR-based model is the minimum level of detail that should be employed to model wireless channel interference in a networking context.
Abstract: In wireless communications, the desired wireless signal is typically decoded by treating the sum of all the other ongoing signal transmissions as noise. In the networking literature, this phenomenon is typically abstracted using a wireless channel interference model. The level of detail in the interference model, evidently determines the accuracy of the results based upon the model. Several works in the networking literature have made use of simplistic interference models, e.g., fixed ranges for communication and interference, the capture threshold model (used in the ns2 network simulator), the protocol model, and so on. At the same time, fairly complex interference models such as those based on the SINR (signal-to-interference-and-noise ratio) have also been proposed and used. We investigate the impact of the choice of the interference model, on the conclusions that can be drawn regarding the performance of wireless networks, by comparing different wireless interference models. We find that both in the case of random access networks, as well as in the case of scheduled networks (where node transmissions are scheduled to be completely conflict-free), different interference models can produce significantly different results. Therefore, a lot of caution should be exercised before accepting or interpreting results based on simplified interference models. Further, we feel that an SINR-based model is the minimum level of detail that should be employed to model wireless channel interference in a networking context.
TL;DR: This paper shows that vehicles using CSMA/CA can experience unacceptable channel access delays and, therefore, 802.11p does not support real-time communications, and presents a potential remedy for this problem, namely, the use of self-organizing time division multiple access (STDMA).
Abstract: Traffic safety applications using vehicle-to-vehicle (V2V) communication is an emerging and promising area within the intelligent transportation systems (ITS) sphere. Many of these new applications require real-time communication with high reliability, meaning that packets must be successfully delivered before a certain deadline. Applications with early deadlines are expected to require direct V2V communications, and the only standard currently supporting this is the upcoming IEEE 802.11p, included in the wireless access in vehicular environment (WAVE) stack. To meet a real-time deadline, timely and predictable access to the channel is paramount. However, the medium access method used in 802.11p, carrier sense multiple access with collision avoidance (CSMA/CA), does not guarantee channel access before a finite deadline. In this paper, we analyze the communication requirements introduced by traffic safety applications, namely, low delay, reliable, real-time communications. We show by simulation of a simple, but realistic, highway scenario, that vehicles using CSMA/CA can experience unacceptable channel access delays and, therefore, 802.11p does not support real-time communications. In addition, we present a potential remedy for this problem, namely, the use of self-organizing time division multiple access (STDMA). The real-time properties of STDMA are investigated by means of the same highway simulation scenario, with promising results.
TL;DR: A generalized minimum mean-squared error (MMSE) channel inversion algorithm for users with multiple antennas to overcome the drawbacks of the BD for multiuser MIMO systems and shows that the proposed algorithm is robust to channel estimation errors.
Abstract: Block diagonalization (BD) is a well-known precoding method in multiuser multi-input multi-output (MIMO) broadcast channels. This scheme can be considered as a extension of the zero-forcing (ZF) channel inversion to the case where each receiver is equipped with multiple antennas. One of the limitation of the BD is that the sum rate does not grow linearly with the number of users and transmit antennas at low and medium signal-to-noise ratio regime, since the complete suppression of multi-user interference is achieved at the expense of noise enhancement. Also it performs poorly under imperfect channel state information. In this paper, we propose a generalized minimum mean-squared error (MMSE) channel inversion algorithm for users with multiple antennas to overcome the drawbacks of the BD for multiuser MIMO systems. We first introduce a generalized ZF channel inversion algorithm as a new approach of the conventional BD. Applying this idea to the MMSE channel inversion for identifying orthonormal basis vectors of the precoder, and employing the MMSE criterion for finding its combining matrix, the proposed scheme increases the signal-to-interference-plus-noise ratio at each user's receiver. Simulation results confirm that the proposed scheme exhibits a linear growth of the sum rate, as opposed to the BD scheme. For block fading channels with four transmit antennas, the proposed scheme provides a 3 dB gain over the conventional BD scheme at 1% frame error rate. Also, we present a modified precoding method for systems with channel estimation errors and show that the proposed algorithm is robust to channel estimation errors.
TL;DR: A geographic forwarding based SpEctrum Aware Routing protocol for Cognitive ad-Hoc networks (SEARCH), is proposed that jointly undertakes path and channel selection to avoid regions of PU activity during route formation.
TL;DR: UWMAC, a distributed Medium Access Control protocol designed for UW-ASNs, is introduced, which is a transmitter-based Code Division Multiple Access (CDMA) scheme that incorporates a novel closed-loop distributed algorithm to jointly set the optimal transmit power and code length.
Abstract: UnderWater Acoustic Sensor Networks (UW-ASNs) consist of sensors and Autonomous Underwater Vehicles (AUVs) performing collaborative monitoring tasks. In this article, UWMAC, a distributed Medium Access Control (MAC) protocol designed for UW-ASNs, is introduced. The proposed MAC protocol is a transmitter-based Code Division Multiple Access (CDMA) scheme that incorporates a novel closed-loop distributed algorithm to jointly set the optimal transmit power and code length. CDMA is the most promising physical layer and multiple access technique for UW-ASNs because it is robust to frequency-selective fading, it compensates for the effect of multipath at the receiver, and it allows receivers to distinguish among signals simultaneously transmitted by multiple devices. UW-MAC aims at achieving three objectives, i.e., guarantee i) high network throughput, ii) low channel access delay, and iii) low energy consumption. It is demonstrated that UW-MAC simultaneously achieves these three objectives in deep water communications (where the ocean depth is more than 100 m), which are usually not severely affected by multipath. In shallow water communications, which may be heavily affected by multipath, it dynamically finds the optimal trade-off among these objectives according to the application requirements. UW-MAC is the first protocol that leverages CDMA properties to achieve multiple access to the scarce underwater bandwidth, while other protocols tailored for this environment have considered CDMA merely from a physical layer perspective. Experiments show that UW-MAC outperforms many existing MAC protocols tuned for the underwater environment under different architecture scenarios and simulation settings.
TL;DR: Measurement results demonstrate that the 60 GHz propagation channel is quasioptical in nature and received signal power is obtained through line of sight (LOS) and reflected signal paths of the first and second orders.
Abstract: This paper presents the results of an experimental investigation of 60 GHz wireless local area network (WLAN) systems in an office environment. The measurement setup with highly directional mechanically steerable antennas and 800 MHz bandwidth was developed and experiments were performed for conference room and cubicle environments. Measurement results demonstrate that the 60 GHz propagation channel is quasioptical in nature and received signal power is obtained through line of sight (LOS) and reflected signal paths of the first and second orders. The 60 GHz WLAN system prototype using steerable directional antennas with 18 dB gain was able to achieve about 30 dB baseband SNR for LOS transmission, about 15-20 dB for communications through the first-order reflected path, and 2-6 dB SNR when using second-order reflection for the office environments. The intra cluster statistical parameters of the propagation channel were evaluated and a statistical model for reflected clusters is proposed. Experimental results demonstrating strong polarization impact on the characteristics of the propagation channel are presented. Cross-polarization discrimination (XPD) of the propagation channel was estimated as approximately 20 dB for LOS transmission and 10-20 dB for NLOS reflected paths.
TL;DR: A stochastic non-line-of-sight (NLOS) ultraviolet (UV) communication channel model is developed using a Monte Carlo simulation method based on photon tracing, which captures the multiple scattering effects of UV signal propagation in the atmosphere, and relaxes the assumptions of single scattering theory.
Abstract: A stochastic non-line-of-sight (NLOS) ultraviolet (UV) communication channel model is developed using a Monte Carlo simulation method based on photon tracing. The expected channel impulse response is obtained by computing photon arrival probabilities and associated propagation delay at the receiver. This method captures the multiple scattering effects of UV signal propagation in the atmosphere, and relaxes the assumptions of single scattering theory. The proposed model has a clear advantage in reliable prediction of NLOS path loss, as validated by outdoor experiments at small to medium elevation angles. A Gamma function is shown to agree well with the predicted impulse response, and this provides a simple means to determine the channel bandwidth. The developed model is employed to study the characteristics of NLOS UV scattering channels, including path loss and channel bandwidth, for a variety of scattering conditions, source wavelength, transmitter and receiver optical pointing geometries, and range.