CPU multiplier

About: CPU multiplier is a research topic. Over the lifetime, 7911 publications have been published within this topic receiving 115840 citations.

Scheduling for reduced CPU energy

Abstract: The energy usage of computer systems is becoming more important, especially for battery operated systems. Displays, disks, and cpus, in that order, use the most energy. Reducing the energy used by displays and disks has been studied elsewhere; this paper considers a new method for reducing the energy used by the cpu. We introduce a new metric for cpu energy performance, millions-of-instructions-per-joule (MIPJ). We examine a class of methods to reduce MIPJ that are characterized by dynamic control of system clock speed by the operating system scheduler. Reducing clock speed alone does not reduce MIPJ, since to do the same work the system must run longer. However, a number of methods are available for reducing energy with reduced clock-speed, such as reducing the voltage [Chandrakasan et al 1992][Horowitz 1993] or using reversible [Younis and Knight 1993] or adiabatic logic [Athas et al 1994].What are the right scheduling algorithms for taking advantage of reduced clock-speed, especially in the presence of applications demanding ever more instructions-per-second? We consider several methods for varying the clock speed dynamically under control of the operating system, and examine the performance of these methods against workstation traces. The primary result is that by adjusting the clock speed at a fine grain, substantial CPU energy can be saved with a limited impact on performance.

High-speed CMOS circuit technique

Abstract: It is shown that clock frequencies in excess of 200 MHz are feasible in a 3- mu m CMOS process. This performance can be obtained by means of clocking strategy, device sizing, and logic style selection. A precharge technique with a true single-phase clock, which increases the clock frequency and reduces the skew problems, is used. Device sizing with the help of an optimizing program improves circuit speed by a factor of 1.5-1.8. The logic depth is minimized to one instead of two or more, and pipeline structures are used wherever possible. Experimental results for several circuits which work at clock frequencies of 200-230 MHz are presented. SPICE simulation shows that some circuits could work up to 400-500 MHz. >

Clock Synchronization in Distributed Real-Time Systems

Abstract: The generation of a fault-tolerant global time base with known accuracy of synchronization is one of the important operating system functions in a distributed real-time system. Depending on the types and number of tolerated faults, this paper presents upper bounds on the achievable synchronization accuracy for external and internal synchronization in a distributed real-time system. The concept of continuous versus instantaneous synchronization is introduced in order to generate a uniform common time base for local, global, and external time measurements. In the last section, the functions of a VLSI clock synchronization unit, which improves the synchronization accuracy and reduces the CPU load, are described. With this unit, the CPU overhead and the network traffic for clock synchronization in state-of-the-art distributed real-time systems can be reduced to less than 1 percent.

Energy-efficient processor design using multiple clock domains with dynamic voltage and frequency scaling

Abstract: As clock frequency increases and feature size decreases, clock distribution and wire delays present a growing challenge to the designers of singly-clocked, globally synchronous systems. We describe an alternative approach, which we call a multiple clock domain (MCD) processor, in which the chip is divided into several clock domains, within which independent voltage and frequency scaling can be performed. Boundaries between domains are chosen to exploit existing queues, thereby minimizing inter-domain synchronization costs. We propose four clock domains, corresponding to the front end , integer units, floating point units, and load-store units. We evaluate this design using a simulation infrastructure based on SimpleScalar and Wattch. In an attempt to quantify potential energy savings independent of any particular on-line control strategy, we use off-line analysis of traces from a single-speed run of each of our benchmark applications to identify profitable reconfiguration points for a subsequent dynamic scaling run. Using applications from the MediaBench, Olden, and SPEC2000 benchmark suites, we obtain an average energy-delay product improvement of 20% with MCD compared to a modest 3% savings from voltage scaling a single clock and voltage system.

Clock skew optimization

Abstract: Improving the performance of a synchronous digital system by adjusting the path delays of the clock signal from the central clock source to individual flip-flops is investigated. Using a model to detect clocking hazards, two linear programs are investigated: (1) minimizing the clock period, while avoiding clock hazards, and (2) for a given period, maximizing the minimum safety margin against clock hazard. These programs are solved for a simple example, and circuit simulation is used to contrast the operation of a resulting circuit with the conventionally clocked version. The method is extended to account for clock skew caused by relative variations in the drive capabilities of N-channel versus P-channel transistors in CMOS. >