Topic
Dielectric resonator antenna
About: Dielectric resonator antenna is a research topic. Over the lifetime, 8199 publications have been published within this topic receiving 111090 citations. The topic is also known as: DRA.
Papers published on a yearly basis
Papers
More filters
•
09 Jun 1992
TL;DR: In this article, the secondary resonator is realized as a strip line resonator in the form of a conductive strip provided on a side face of the dielectric block from which the main resonator was formed.
Abstract: An adjustable resonator arrangement comprises a main resonator (T1) and a secondary resonator (T2) reactively coupled thereto. The secondary resonator includes a switching element (S), e.g. a varactor, having at least two states. When the switching element is in a first state the secondary resonator behaves as a half-wave resonator having a resonant frequency f o substantially different to the resonant frequency f of the main resonator. Consequently the secondary resonator has no appreciable affect on the resonant frequency of the main resonator. However, when the switching element is in a second state, the secondary resonator behaves as a quarter-wave resonator having a resonant frequency 2*f o which is closer to the inherent frequency f of the main resonator and sufficiently close to cause a shift Δf in the effective frequency of the main resonator. Suitably the main resonator is realized as a dielectric resonator and the secondary resonator is realized as a strip line resonator in the form of a conductive strip provided on a side face of the dielectric block from which the main resonator is formed.
53 citations
••
TL;DR: An approach to rapid optimization of antennas using the shape-preserving response-prediction (SPRP) technique and coarsediscretization electromagnetic (EM) simulations (as a low-fidelity model) is presented.
Abstract: An approach to rapid optimization of antennas using the shape-preserving response-prediction (SPRP) technique and coarsediscretization electromagnetic (EM) simulations (as a low-fidelity model) is presented. SPRP allows us to estimate the response of the high-fidelity EM antenna model, e.g., its reflection coefficient versus frequency, using the properly selected set of so-called characteristic points of the low-fidelity model response. The low-fidelity model, corrected by means of SPRP, is subsequently used to predict the optimal design. The design process is cost efficient because most operations are performed on the low-fidelity model. Performance of our technique is demonstrated using a dielectric resonator antenna and two planar wideband antenna examples. In all cases, the optimal design is obtained at a cost corresponding to a few high-fidelity simulations of the antenna under design.
53 citations
••
TL;DR: In this paper, the impedance bandwidth of a high permittivity cylindrical dielectric resonator antenna excited by a microstrip line was significantly improved by modifying the feed geometry.
Abstract: The impedance bandwidth of a high permittivity cylindrical dielectric resonator antenna excited by a microstrip line was significantly improved by modifying the feed geometry. The 10 dB return loss bandwidth is enhanced from 12 to 26% without much affecting the gain and other radiation properties of the antenna. Good agreement has been observed between the predicted and measured results.
53 citations
••
TL;DR: In this article, a dielectric resonator antenna structure has been proposed for use at microwave and millimetre-wave frequencies, which can be designed to have a low radiation Q-factor resulting in a relatively wider bandwidth of operation.
Abstract: A practical dielectric resonator antenna structure has been proposed for use at microwave and millimetre-wave frequencies. The radiator can be designed to have a low radiation Q-factor resulting in a relatively wider bandwidth of operation. The scheme used for feeding the antenna shields the feeding arrangement and the associated circuitry from the radiation zone.
53 citations
••
TL;DR: In this article, a dual-band dielectric resonator antenna (DRA) is designed by splitting a rectilinear D resonator and carving notches off the DR, which can cover both the worldwide interoperability for microwave access (WiMAX, 3.4-3.7GHz) and the wireless local area network (WLAN, 5.15-5.35-GHz) bands.
Abstract: A dualband dielectric resonator antenna (DRA) is designed by splitting a rectilinear dielectric resonator (DR) and carving notches off the DR. It is observed that notches engraved at different positions affect different modes. Removal of dielectric material from where the electric field is strong incurs a significant increase in resonant frequency. The abrupt change of normal electric field across the discontinuities reduces the -factor and increases the impedance bandwidth. Both the and modes incur broadside radiation patterns on the -plane. The proposed DRA can cover both the worldwide interoperability for microwave access (WiMAX, 3.4-3.7-GHz) and the wireless local area network (WLAN, 5.15-5.35-GHz) bands.
53 citations